Jump to content

Recommended Posts

[YOUTUBE]0fkNEw-BaKM[/YOUTUBE]

 

The Huey was designed primarily as a medevac helicopter, so I made a little script that will generate Medevac taskings for wounded units. If a ground-vehicle on your side is destroyed, some infantry will spawn representing the crew of the vehicle. You will be notified that they want to be evacuated, you will get coordinates of their position, and when you get near they will drop a smoke marker. You should then pick them up, and before the timer has ended, you should have dropped them off at the MASH (hospital). Unfortunately you can't get any points for saving people, but I included a option to spawn a new group just like the destroyed units once you land (see medevac.clonenewgroups in the spoiler). Also, from version 3 on you can pick up downed pilots (Search And Rescue).

 

Requires: MiST 3.0+ (versions older than 4.2 needs Mist 2.0 and SCT, see next post)

Instructions:

1. Edit the file Medevac.lua and change as you please:

[list]
[*]medevac.medevacunits - so it contains all the Medevac UNITS (as named under "Pilot" in the mission editor) that you want to use. See picture below.
[*]medevac.bluemash = Unit.getByName("BlueMASH") - name a unit in the mission to BlueMASH and it will act as the MASH for blue side.
[*]medevac.redmash = Unit.getByName("RedMASH") -name a unit in the mission to RedMASH and it will act as the MASH for red side.
[*]medevac.maxbleedtime - set the maximum time that one could have before a wounded bleeds to death.
[*]medevac.bluesmokecolor = Color of smokemarker for blue side, 0 is green, 1 is red, 2 is white, 3 is orange and 4 is blue
[*]medevac.redsmokecolor = Color of smokemarker for red side, same as above
[*]medevac.requestdelay = Time in seconds before the survivors will request Medevac
[*]medevac.coordtype = Use Lat/Long DMTM (0), Lat/Long DMS (1), MGRS (2), Bullseye imperial (3) or Bullseye metric (4) for coordinates.
[*]medevac.displaymapcoordhint = Change to false to disable the hint about changing coordinates on the F10-map
[*]medevac.textdisplaymode = 0 to use stacked MiST-style (ideal), 1 to use old-single message style (if no text displayed).
[*]medevac.displayerrordialog = Set to true to display error dialog on fatal errors. Recommend set to false in live game.
[*]medevac.displaymedunitslist = Set to true to see what medevac units are in the mission at the start (for debugging your mission).
[*]medevac.bluecrewsurvivepercent = Percentage of blue crews that will make it out of their vehicles. 100 = all will survive.
[*]medevac.redcrewsurvivepercent = Percentage of red crews that will make it out of their vehicles. 100 = all will survive.
[*]medevac.showbleedtimer = Set to true to see a timer counting down the time left for the wounded to bleed out, false to hide it
[*]medevac.sar_pilots = Set to true to allow for Search & Rescue missions of downed pilots, false to not use this feature
[*]medevac.clonenewgroups - set to true to spawn new units every time the player manages to bring back some wounded to the MASH.
[/list]
2. Open your mission in the Mission Editor


3. Click "Set rules for trigger" in the left pane


4. Click the leftmost New for a new trigger.


5. Click the middle New and change it to Time more, and set it to 2 sec


6. Click the rightmost New and change it to Do script file and click open and select Mistv3_x.lua


7. Repeat 4-6 but set time to 4 sec and select Medevac.lua instead.


8. Close the window


9. Add a MASH for each side. It must be a live ground unit and it must be named "BlueMASH" and "RedMASH" respectively (unless you changed it above).


10. Add MEDEVAC units (preferably player-controlled Hueys, right?) and name the UNITS (the line that says "Pilot") like you did above in medevac.medevacunits. See pictures:
[attachment=147960:name]
[attachment=147961:name]
11. Play the mission.

 

Known issues (v 4):

- The Latitude/Longitude coordinates is broken. Don't know why or how to fix it. The other coordinates options (MGRS or Bullseye) do work.

 

Latest version on GitHub:

https://github.com/RagnarDa/DCS-Mission-Scripts/tree/master/Medevac

 

Changelog

( 2014-01-05 ) Happy new year! Time for version no. 4.2! This includes changes from version 4.1 and for alexej21.

 

  • Changelog v 4.2
    - Verified compatibility with MiST 3.2+ and removed compatibility with SCT.
  • Changelog v 4.1
    - Added so units will place new smoke if the medevac crashes (requested by Xillinx) Still untested, please report!
  • Changelog v 4 alexej21
    - Added option for immortal wounded.
    - Added option for spawning every third crew as an RPG soldier.

 

( 2013-09-09 ) Update no. 4! This includes the changes from version 3.1 and 3.2:

 

  • Changelog v 4
    - Added option medevac.sar_pilots for those that want to turn off the search for downed pilots feature, which is probably better done by other scripts.
  • Changelog v 3.2
    - Added possibility for multiple MASH:es (suggested by a number of people)
    - Added option to hide bleedout timer (suggested by FubarBundy)
  • Changelog v 3.1
    - Added check so that MASH is on right coalition.
    - Removed option to use MiST-messaging as it is not working.
    - Added option to change color of smoke for each side (suggested by Shelt)

( 2013-06-12 ) Update! Fixed some issues, and added new features (including SAR!):

 

  • Changed model of red soldiers to high-detail (russian) ones
  • Added survivalpercent for both sides (suggested by [MA] Agaton)
  • I *think* I solved the problem with long messages (reported by BIGNEWY)
  • Search And Rescue missions! (suggested by a number of people)
  • Added a F10-radiomenuitem so you can check available tasks (suggested by MiK684 and WolfK33)
  • Solved issue with survivors running around in circles
  • The update is called v3

( 2013-05-29 ) Update! Fixed a few problems and added new features:

 

  • Please note that medevac.medevacunits should now contain the name of the individual units, and not the group like before.
  • A message system (using MiST) that displays multiple messages from different medevac-tasks. Don't really know how this will work in multiplayer.
  • More options! You can now select which color of the smoke markers to use (default green), coordinate system that the medevac-request will be in (default Bullseye/Imperial), and how long before a unit will request evacuation (default 5 sec which is kind of short). Theres also multiple useful options for debugging/going live, like turning OFF error-dialogs.
  • Note that this download is called v2 and you can still download the old version in case this update brakes something.

( 2013-05-28 ) Update! Found a bug thanks to my squad-mate Agaton. Updated script + mission attached!

 

WHAT DO I WANT IN RETURN?

I've spent a few days developing this script. What I need now is feedback! Did it crash? Did it suck? Did it rock? The script outputs data to the dcs.log - file so if you experience a crash or something else unwanted, please please please send the log-file to me so I can maybe fix the problem. If you make a mission with this script please tell me! Even if its a very simple mission I would really like to know how and if this script is used.

 

See you in the skies!

MEDEVAC_SAR-demo v4_2.miz

Medevac_SAR v4_2.lua

Unit_name.thumb.png.8f260170d39228e225d3333927676bba.png

Medevac_name.thumb.png.c382c452d37d72642c8ab5a094825be8.png

Edited by RagnarDa
Added link to GitHub

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites
  • Replies 391
  • Created
  • Last Reply

Top Posters In This Topic

These are older versions of the script in case a upgrade breaks it. Requires Mist 2.0 and SCT,

Medevac.lua

MEDEVAC-demo.miz

Medevac v2.lua

MEDEVAC-demo v2.miz

Medevac_SAR v3.lua

MEDEVAC_SAR-demo v3.miz

Medevac_SAR v4.lua

MEDEVAC_SAR-demo v4.miz

Edited by RagnarDa
Moved old scripts here instead

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites
  • ED Team

Thanks RagnarDa

 

I am integrating this into one of the Shrek Squadron missions I have, it works well in testing, and I am looking forward to testing it in multiplayer with a full server.

 

One question I do have, is it possible to change the colour of the smoke ? I had a look at the lua but could not see which attribute was the colour.

 

again

 

thanks for a great script :thumbup:

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 10 Pro x64, NVIDIA MSI RTX 2080Ti VENTUS GP, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3000, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to post
Share on other sites

really nice... in particular that you have add

medevac.maxbleedtime - set the maximum time that one could have before a wounded bleeds to death.

after i saw : http://www.youtube.com/watch?v=Sh47mRjerGs

Waiting for:DCS: Mi-24 Hind, ...

Intel i5-7600K @4.1GHz, 32GB DDR4 @2400MHz, GTX 1070 Gigabyte Gaming OC 8GB DDR5, WIN 10 64Bit Prof.

 

Squadron "Serious Uglies"

[sIGPIC][/sIGPIC]

Ghost0815

 

Link to post
Share on other sites
Thanks RagnarDa

 

I am integrating this into one of the Shrek Squadron missions I have, it works well in testing, and I am looking forward to testing it in multiplayer with a full server.

 

One question I do have, is it possible to change the colour of the smoke ? I had a look at the lua but could not see which attribute was the colour.

 

again

 

thanks for a great script :thumbup:

THANK YOU for the feedback!

 

To change the color, look at line 314:

trigger.action.smoke(_rescuepoint, 1) 

Change the 1 to another number (0 is green, 1 is red, 2 is white, 3 is orange and 4 is blue). Make sure you reload the script in the mission by deleting "Do script file" - trigger and re-adding it. Which color do you want to change to? I don't know which color is normally used at a Medevac/Casevac LZ...

 

Could I ask you to maybe send me the mission once you finished it? It would be fun to see what you made out of it, and maybe we in Masterarms could use it for our flying-evenings.

 

really nice... in particular that you have add
medevac.maxbleedtime - set the maximum time that one could have  before a wounded bleeds to death.

after i saw : http://www.youtube.com/watch?v=Sh47mRjerGs

Thanks! I thought it would add more suspense to the mission.

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites
  • ED Team
THANK YOU for the feedback!

 

To change the color, look at line 314:

trigger.action.smoke(_rescuepoint, 1) 

Change the 1 to another number (0 is green, 1 is red, 2 is white, 3 is orange and 4 is blue). Make sure you reload the script in the mission by deleting "Do script file" - trigger and re-adding it. Which color do you want to change to? I don't know which color is normally used at a Medevac/Casevac LZ...

 

Could I ask you to maybe send me the mission once you finished it? It would be fun to see what you made out of it, and maybe we in Masterarms could use it for our flying-evenings.

 

 

 

 

 

RagnarDa, tested tonight with a few friends and it worked great! I am tweaking my mission, for a shrek squadron mission night and when it is finished I will message you with a copy.

 

Edit: I changed the smoke to white, the only reason for this was I had red smoke in my mission already for the enemy.

 

Thanks again !

Edited by BIGNEWY

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 10 Pro x64, NVIDIA MSI RTX 2080Ti VENTUS GP, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3000, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to post
Share on other sites

That's just freaking awesome. I bet this could be modified for pilot SAR very easily, too. A long time back, I wanted to make a script to automatically dispatch an AI SAR helo, but I never got around to it. Your concept is much better though, as it really gives the UH-1 pilots something cool and useful to do. It's far better than the cumbersome ideas that I had (though it helps a lot having an actual human pilot to do it...)

 

Maybe in the next version of Slmod, I could add the ability to add a custom stat to SlmodStats via Slmod mission scripting. So maybe, if you're interested, a future verison of your script could call the Slmod function (if it exists) to add a stat to player- in particular- number of injured persons saved. So we could have the people you saved added to your logbook, in a very real sense!

 

Oh and what if your script was modified further- the patients you pick up, maybe they could have randomized injuries. Some would be only lightly injured, while others could be critically injured so badly that if you don't get them back to the MASH really fast, they die! You could have the on-board "Medic" outTextToGroup stuff like, how badly is the guy injured, and whether or not you have time to pick someone else up or you need to book it back to base.

 

Of course, you need to have patients randomly die and there be nothing you can do about it. Frequently. And the injury timers need to start when the person is hurt, not when you pick them up.

 

Anyway, I see huge potential in this concept... basically- DCS: MASH!!!! This idea has me greatly excited!

Edited by Speed

Intelligent discourse can only begin with the honest admission of your own fallibility.

Member of the Virtual Tactical Air Group: http://vtacticalairgroup.com/

Lua scripts and mods:

MIssion Scripting Tools (Mist): http://forums.eagle.ru/showthread.php?t=98616

Slmod version 7.0 for DCS: World: http://forums.eagle.ru/showthread.php?t=80979

Now includes remote server administration tools for kicking, banning, loading missions, etc.

Link to post
Share on other sites

FEEDBACK MASH is Painless MEDEVAC

 

We have this evening been running your medevac script in a test within one of our training missions. This script is BEAUTIFUL , congratulations on a work of art ...... I love the way it runs and particularly like the way it generates a casualty "bleedout time" linking it to the lifebar status of the casualty. Picking up MULTIPLE groups of casualties in the same lift is also well handled with the "Bleedout time" being indicated by an alternating display showing each groups status .... its great.

Thanks to your help we were also able to change the pickup point smoke colour to better suit our need.

This was by no means an exhaustive test but the first test runs have been great for atmospheric activity for the HUEYs we all loved it.

Possible improvments...... well there is some concern that because of the ruthless efficiency of AI combatants it might be difficult to get enough casualties / survivors to keep one or two MASH HELOS busy during a mission, the logic being that if they were in contact with enemy AI then the spawned casualties would also be quickly killed in follow up action. This might generate lots of "futile" casevac notifications.

In our test session we had a player killing units that were not in direct contact with ememy ground forces, this produced casevac requests that had survivors to pickup.

The other problem lay with the choice of cas location information format ie MGRS grid reference . This is less than usefull when your F10 map cursor only shows Lat & Long and as far as I know its not changable "in mission" bearing in mind that players are now increasingly swapping between many different aircraft in a single session so it would be much better to provide for locations format to be selectable in some way, or if that is not an option then the default choice should be Lat & Long.

BIGNEWY-=Shrek=-99 is now looking to further refine its integration into our training missions.

So the test run got a big thumbs up and we will be using this script in our missions for sure. WELL DONE from shrek squadron members.

[sIGPIC][/sIGPIC]

Link to post
Share on other sites

@Speed

About the SAR: I had the same idea a while ago, but it seems other people beat me to it (haven't tested it yet).

 

About the scoring: That would be much appreciated! That was my original idea, to have the player receive points for people they rescued but its impossible right now when only using the script engine.

 

About different injuries: This is implemented now and the units carried will bleed out depending on multiple factors like the nature of the wound, their relative physical health, amount of blood in their system, amount of pressure applied to the wound and if they're in chock or not.

No, not really :)

 

There's just a countdown timer that starts to count down a random amount of seconds (max time selected by mission designer) from when the unit is picked up and when time is up the unit "dies". Sometimes the soldiers will die almost instantly after they board, sometimes you will have time to pick up others. I will consider changing the code so it will start the countdown when the unit get wounded, but I foresee some problems with that. I was also thinking about changing the countdown timer to something a virtual medic would have said, like "We're losing him! Hurry up!" or something.

 

 

@OGREMAN

Thanks for the kind words! I am happy the multiplayer mission worked as I haven't had time to do tests on my own.

 

About futile medevacs: this might be considered a mission-design issue as the opposing force might be too overhwelming. One way the medevac-Huey's could be more useful is if you place road mines in the mission (Static objects->Structures->Land mine I think). I do on the other hand have a few a ideas that might remedy this problem but I can only try them out once I have more time for coding.

 

About different map-grids: Will look into having this selectable by the mission-designer.

 

Thanks everyone for the input!

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites

Another idea for a solution to the futile medevac problem: Increase the delay between a vehicle gets destroyed and the survivors calls in the helicopter. If they survive longer before calling you they probably will survive long enough time to be picked up by the helicopter.

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites
  • ED Team

Been thinking about the easiest way to find the casualty on a large scale area.

 

It seems to me the best way would be a bullseye call, given the map facilities in DCS:Huey are currently limiting, even the f10 map is not great for detailed navigation.

 

keep up the good work, we ( shrek squadron ) will be giving my mission a large scale test soon with your script running :) I will let you know how we get on.

 

Thanks

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 10 Pro x64, NVIDIA MSI RTX 2080Ti VENTUS GP, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3000, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to post
Share on other sites

Script updated in OP. Most noticeable change is new message system (see screenshot of a stress-test I did). Added features like request will be in coordinate of your choice (default NATO-style Bullseye) or choose color of the smoke marker. Please note that the medevac.medevacunits variable now needs to list the individual unit names and not the group names like before. Hope you'll enjoy it!

Screen_130529_223747.thumb.jpg.7036edadecbe1939bf7304d7bb194140.jpg

Edited by RagnarDa

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites

Absolutely excellent script mate. Just had a go at it integrated into one of Newy's missions and it works really well. Actually got quite excited at my first medevac. Proper sense of achievement :smartass:

 

Big THANK YOU from myself :thumbup:

[sIGPIC][/sIGPIC]

The man who never made a mistake never made nothing!

Link to post
Share on other sites
Absolutely excellent script mate. Just had a go at it integrated into one of Newy's missions and it works really well. Actually got quite excited at my first medevac. Proper sense of achievement :smartass:

 

Big THANK YOU from myself :thumbup:

 

Because the script spawns crewmembers for the other side too, there will most likely be infantry vs infantry combat when you arrive at the LZ. I found during testing that one of the most thrilling parts was having to lay down covering fire or just soaking up enemy fire for the little guy you're picking up!

Edited by RagnarDa

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites
Because the script spawns crewmembers for the other side too, there will most likely be infantry vs infantry combat when you arrive at the LZ. I found during testing that one of the most thrilling parts was having to lay down covering fire or just soaking up enemy fire for the little guy you're picking up!

Ah ok, now I know where the red inf guys came from, when we tried it last night.:)

Like youre script and makes flying the Huey more rewarding.:thumbup:

Deutsche DCS-Flughandbücher

SYSSpecs: i7-4790K @4GHz|GA-Z97X-SLI|16GB RAM|ASUS GTX1070|Win10 64bit|TrackIR5|TM Warthog/Saitek Pro Pedals

Link to post
Share on other sites
  • ED Team

Version 2 tested in single player, working well :thumbup:

 

Going to give it a go in multiplayer later.

 

Some points from my mission.

 

My mission is coop and there is a lot of units to assist ( the ones who survive :) ) so the Mist scroll does not work as well as the single text.

 

Also how do I reduce the time on the good job message ? as we will be doing multiple pick-ups thought my mission in conjunction with a ground and air defence I would prefer a shorter time for the message.

 

The message that tells you a MEDEVAC unit is not active when the script starts can it be disabled ? ( it was interfering with a message to all for the mission ).

 

Bullseye calls work great for finding your casualties, so thanks for adding it in :thumbup:

Edited by BIGNEWY

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 10 Pro x64, NVIDIA MSI RTX 2080Ti VENTUS GP, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3000, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to post
Share on other sites
  • ED Team

Just tested v2 in multiplayer with 2 medevac hueys,

 

when medevac 1 picks up a crew, medevac 2 gets a report saying the crew is dead, even though they have been picked up and can still be returned to the farp.

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 10 Pro x64, NVIDIA MSI RTX 2080Ti VENTUS GP, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3000, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to post
Share on other sites

On my way home to have a look, but in the meanwhile I was thinking and there's at least three solutions to the "information overload"-problem:

 

1. Reduce the number of surviving vehicle crews by at least 50%. IRL probably most crews would die inside their vehicles when the vehicle gets hit by a tank cannon. This is probably very quick to implement.

2. Reduce the amount of information available to the player, like only showing the three closest medevac requests.

3. Reduce the number of taskings for any one helicopter, like three taskings per helicopter.

 

I'm not really sure what route to go but I think nr 2 would take most time to implement.

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites
  • ED Team

I would go with no. 3 to make it work in multiplayer, no more than 3 tasks available at any one time.

 

I must admit I liked version 1 of the script, if that had Bullseye calls it would work well.

 

If you want to chat about my findings I am always on Shrek TS (on our web page ) if the pc is on :)

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 10 Pro x64, NVIDIA MSI RTX 2080Ti VENTUS GP, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3000, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to post
Share on other sites
That's just freaking awesome. I bet this could be modified for pilot SAR very easily, too......

 

Speed on this line is it possible to connect success of an action to the number of aircraft that can be used in an MP mission. For instance, let say an MP pilot gets shot down. Over Teamspeak he relays his location to the SAR in a huey. The huey lands within a set distance of the downed MP player. A flag is flipped to recognize the pilot has been picked up. Once the Huey lands back at base, it allows another aircraft to be spawned into the game. Is this kind of thing possible. Now weve changed the nature of MP play to make aircraft and pilot lives much more important as an asset. You cant respawn unless you have been rescued.

I was in Art of the Kill D#@ it!!!!

Link to post
Share on other sites

I did a few modifications to the script as per request:

 

- Reduced "God job" message to 10 secs (long display caused by a bug)

- Reverted to old single-line messages. This can be set with medevac.textdisplaymode (0 for multiple messages, 1 for single message)

- Added chance of 50% that the crew will make it out of their vehicle alive. This can be changed with medevac.crewsurvivepercent (100 means all will survive, 0 turns in effect off the script)

- Fixed (I think) the problem with crews getting reported as dead for other players. Now it *should* say they where picked up.

- Removed debug-message and map coordinates tip. These can be turned back on with setting.

 

Just did a few quick tests and it seems OK.

 

Thanks for the suggestions and testing! It is very valuable for me as a developer to get feedback from the end-user!

Medevac v2 BIGNEWY.lua

Edited by RagnarDa

DCS AJS37 HACKERMAN

 

There will always be bugs. If everything is a priority nothing is.

Link to post
Share on other sites
  • ED Team

Thanks RagnarDa will give it a test out tonight.

 

Appreciate you doing all of this, like so many others in the community with the know how to do this sort of thing.

 

Thanks

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 10 Pro x64, NVIDIA MSI RTX 2080Ti VENTUS GP, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3000, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to post
Share on other sites

Tried it SP and this is totally brilliant. I am humbled by all the talents working here to make our experience of the game better and better. Thank you!

 

Do you think there's a chance to have this working for downed pilots and not only ground vehicles? Sorry but my knowledge in scripting is null.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...