Bog9y Posted September 9, 2021 Share Posted September 9, 2021 I was checking out the PUC function and noticed that the symbology is wrong, it is identical to the reflected CCIP symbol, apparently (according to the RB Discord channel) it got changed in the last 12 months, it used to look as per the TACMAN. I tested it's functionality and it seems to work but not exactly as it should. When the PUC approaches the VV and you initiate a 4G pull you will go below the entered ALT by around 500 ft on dives between 20 and 35ish degrees. If you dive with 45 degrees or more you will go below the PUC alt by around a 1000 ft. This is not how it should work, according to TACMAN-000 if you pull 4Gs as the PUC approaches the VV you should not go below the entered PUC altitude. Also, according to the manual this altitude should be a barometric altitude, not radar. 1 Link to comment Share on other sites More sharing options...
AlphaJuliet Posted September 15, 2021 Share Posted September 15, 2021 Needs investigation with SME's 1 Link to comment Share on other sites More sharing options...
Shiroka Posted September 15, 2021 Share Posted September 15, 2021 For reference, you can see how it should look in fig. 2-31 in the Tacman vol. 1 (page 2-35 in the copy floating around online). 2 Link to comment Share on other sites More sharing options...
Shiroka Posted December 20, 2021 Share Posted December 20, 2021 @AlphaJulietthis is still marked as investigating. Did you ever get confirmation from the SMEs about symbology? Link to comment Share on other sites More sharing options...
Recommended Posts