Jump to content

ATFLIR lock and AGM-65F slew


RoxSy
 Share

Recommended Posts

Hi guys !

I see that a lot of us are struggling with the impossibility to slew the seeker of the AGM-65F when the POD is locked on something, should it be waypoint, scene of point track.

 

The real problem is to fine tune the IR lock of the Maverick, especially with moving targets of target in close vincinity of other heat signatures.

 

I found myself having to get the target with the POD, point the VVSL to the target, uncage the Mav, then go back to the POD to switch it to VVSL (and unlock) then switch back to the Mav to slew it and fine tune.

 

But you guessed it, you lose your SA and have to search other vehicules of a convoy again.

 

The workaround is to put Mark points in advance in the path of the vehicules ... not really great.

 

All this because we can't move that goddamn seeker when the POD is locked.

 

Now the question is :

Is it a bug ?

Or is it a limitation of the weapons and POD relations in the IRL Hornet ?

 

Thx

Simba

  • Like 1
Link to comment
Share on other sites

The TPOD is irrelevant, what matters is that you have a ground designation (diamond). Currently, we are unable to slew the Maverick seeker with a ground designation present.

 

The TAC Pocket Guide describes two different ways of employing the Maverick with a designated A/G target - one of them seems to allow slewing of the seeker with a ground designation present, but we don't have it in DCS.

  • Like 2

The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord.

1197644828_Screen_200911_044202-Copy.png.74d8c09ee9060cffd7408a75ab2c13ef.png

38" AW3821DW, Z370 Aorus Gaming 7, i7-8700K, 3090 FTW3 Ultra, 32GB DDR4, 960 Pro, 970 Evo Plus, WD Gold 6TB, Seasonic Prime Platinum
Super Taurus throttle + base, Combat and T/O panels, TM50 base, Hornet grip w/extension, 3 MFDs

F/A-18C, AV-8B, F-16C, JF-17, A-10C (C II), M-2000C, F-14, BS2, UH-1H, P-51D, Sptifire, FC3

Link to comment
Share on other sites

please include a short track replay when trying to report a bug. 

 

I can not reproduce any problem, seems to be working as intended for me. 

 

thanks

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to comment
Share on other sites

On 8/31/2021 at 11:40 AM, BIGNEWY said:

please include a short track replay when trying to report a bug. 

 

I can not reproduce any problem, seems to be working as intended for me. 

 

thanks

Hi Sir.

And how am I supposed to do that ?

Filming my hands and the screen with a GoPro ?

 

Come on my friend.

Just hop in the Hornet cold and dark, designate anything with the ATFLIR or the radar and lock it.

Then hand-off to the Maverick, and try to slew it.

 

It won't work.

 

If it works for you then please describe step by step very precisely how you do it.

That way we can check if we are all not doing something wrong.

 

It is an Open Beta where we kindly report potential bugs for you to improve and develop your products.

 

But we are not supposed to sacrifice precious minutes of ''flying'' just to figure how to report bugs.

 

Every other Hornet drivers I talked with are experiencing this problem and it is now more a matter of how to work around this ...

 

If it is supposed to be that way, so be it.

 

But just don't ask me to sacrifice a couple of hours to elaborate a plan to show a bug.

 

Just ... try it.

 

Thank you 🙂

 

Regards

Link to comment
Share on other sites

Hi,

 

you can save a track replay when you exit the mission during the debrief window.

 

thanks 

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 32GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2

Link to comment
Share on other sites

vor 1 Stunde schrieb RoxSy:

Hi Sir.

And how am I supposed to do that ?

Filming my hands and the screen with a GoPro ?

 

Come on my friend.

Just hop in the Hornet cold and dark, designate anything with the ATFLIR or the radar and lock it.

Then hand-off to the Maverick, and try to slew it.

 

It won't work.

 

If it works for you then please describe step by step very precisely how you do it.

That way we can check if we are all not doing something wrong.

 

It is an Open Beta where we kindly report potential bugs for you to improve and develop your products.

 

But we are not supposed to sacrifice precious minutes of ''flying'' just to figure how to report bugs.

 

Every other Hornet drivers I talked with are experiencing this problem and it is now more a matter of how to work around this ...

 

If it is supposed to be that way, so be it.

 

But just don't ask me to sacrifice a couple of hours to elaborate a plan to show a bug.

 

Just ... try it.

 

Thank you 🙂

 

Regards

If a tester can't reproduce the error you describe, a track file (not a video!), provides a lot of detailed information for debugging.

For example it contains your complete settings and options configuration, all your input from buttons pressed, switch position to system states.

Even without EDs debugging tools testers and devs can use track replays to compare procedures to what you did in game and identify what's different. 

 

  • Like 5

Shagrat

 

- Flying Sims since 1984 -:pilotfly:

Win 10 | i5 10600K@4.1GHz | 32GB | GeForce RTX 2080S - Acer XB280HK 28" 4k | TrackIR5 | Simshaker & Jetseat | VIRPIL CM 50 Stick & Throttle | MFG Crosswind Rudder Pedals | TM Cougar MFDs | a hand made UFC | AHCP | 2x Elgato StreamDeck (Buttons galore)

Link to comment
Share on other sites

Damn I need to think more before speaking.

I was thinking replays were just ... replays (safe to say I never used them)

I was imaging something to show my hands to check on my procedures, not realizing tracks contain key presses and other useful things.

 

Sadly I won't be able to even turn on DCS in the next couple of weeks.

So if someone can go at it, feel free.

 

If not, I'll find time to set up something when I come back.

 

Sorry for the rant though.

  • Thanks 1
Link to comment
Share on other sites

Here's the track.
ATFLIR+AGM=-65F.trk
I specially put the oil rig near the target (tank). TGP - SCENE, slew the over the tank, uncaged AGM,  but the AGM-65F  locked oil rig (as the larger one). And I need to slew the AGM-65F over the tank, which is impossible because the AGM-65F cursor in this case is blocked and not slewed!

 

ATFLIR+AGM-65F.jpg


Edited by SMN
  • Like 1

Окурок, выброшенный в урну, гораздо патриотичнее флажочка на автомобиле

TM Wartrhog Stick + VPC MongoosT-50Base + VPC TMW Extension 150mm / TM Wartrhog Throttle / CH Pro Pedals / 2-VPC Deck Mount / TrackIR5/

__________________________________________________________

i76700K Over to 4.6/32GbDD4-3000/MSI-1070Ti Gaming/System-SSD1 DCS-SSD2/32" 2560x1440

Link to comment
Share on other sites

vor 3 Stunden schrieb SMN:

Here's the track.
ATFLIR+AGM=-65F.trk
I specially put the oil rig near the target (tank). TGP - SCENE, slew the over the tank, uncaged AGM,  but the AGM-65F  locked oil rig (as the larger one). And I need to slew the AGM-65F over the tank, which is impossible because the AGM-65F cursor in this case is blocked and not slewed!

 

ATFLIR+AGM-65F.jpg

 

The right MFD with the TGP is selected for control with the TDC. Indicated, by the diamond symbol in the upper right corner.

Switch to the left MFD with the MAV, with SensorSelectSwitch left (check diamond is on the MAV screen) then you control the MAV seeker with the TDC.

It may be necessary to depress TDC to actually command a lock, if it can't lock the tank immediately on slew.


Edited by shagrat

Shagrat

 

- Flying Sims since 1984 -:pilotfly:

Win 10 | i5 10600K@4.1GHz | 32GB | GeForce RTX 2080S - Acer XB280HK 28" 4k | TrackIR5 | Simshaker & Jetseat | VIRPIL CM 50 Stick & Throttle | MFG Crosswind Rudder Pedals | TM Cougar MFDs | a hand made UFC | AHCP | 2x Elgato StreamDeck (Buttons galore)

Link to comment
Share on other sites

3 hours ago, SMN said:

And I need to slew the AGM-65F over the tank, which is impossible because the AGM-65F cursor in this case is blocked and not slewed!

I've re-tried your track a few times and you're right. It's not possible to slew the MAV-F.

To get a MAV-F-lock onto the T-55 instead the nearby oil rig it's sometimes necessary to (multiple) uncage and (re)cage, sometimes a simple SCS right (sensor priority to the ATFLIR) followed by SCS left (sensor priority back to the MAV-F) helped, but in some cases the hand-off worked instant.

 

FA-18C ATFLIR AGM-65F 04.trk FA-18C ATFLIR AGM-65F 01 handoff instant.trk FA-18C ATFLIR AGM-65F 02 handoff instant.trk FA-18C ATFLIR AGM-65F 03.trk

[Modules] A-10C, A-10C II, F-14A/B, F-16C, F/A-18C, FC3, Ka-50, UH-1H, CA, SC

[Maps] PG, NTTR, Normandy, Syria

[PC] Z270F, i7-7700K, 64 GB DDR4-2666, RTX 2080 SUPER 8 GB GDDR6, SSD 970 EVO Plus 1 TB (M.2), 2 x SSD 850 EVO 500 GB (SATA3), 2 TB HDD, TM HOTAS Warthog (Grip@WarBRD Base), MS SW FFB2, Thrustmaster TFRP, TrackIR 5 & TrackClip Pro

[Checklists] A-10C, F-16C, F/A-18C, Ka-50, UH-1H

Link to comment
Share on other sites

15 minutes ago, shagrat said:

Switch to the left MFD with the MAV, with SensorSelectSwitch left (check diamond is on the MAV screen) then you control the MAV seeker with the TDC.

It may be necessary to depress TDC to actually command a lock, if it can't lock the tank immediately on slew.

The only way to get the MAF-F sensor slewed is to simultaneously hold down UNDESIGNATE and TDC depress. But it's still impossible to get a lock onto the T-55. As soon as you release UNDESIGNATE and TDC depress, the MAF-F re-locks to the oil rig.

IMHO this is a bug and NOT as intended.

FA-18C ATFLIR AGM-65F 05 slew but no lock.trk

  • Like 1

[Modules] A-10C, A-10C II, F-14A/B, F-16C, F/A-18C, FC3, Ka-50, UH-1H, CA, SC

[Maps] PG, NTTR, Normandy, Syria

[PC] Z270F, i7-7700K, 64 GB DDR4-2666, RTX 2080 SUPER 8 GB GDDR6, SSD 970 EVO Plus 1 TB (M.2), 2 x SSD 850 EVO 500 GB (SATA3), 2 TB HDD, TM HOTAS Warthog (Grip@WarBRD Base), MS SW FFB2, Thrustmaster TFRP, TrackIR 5 & TrackClip Pro

[Checklists] A-10C, F-16C, F/A-18C, Ka-50, UH-1H

Link to comment
Share on other sites

11 minutes ago, AstonMartinDBS said:

I've re-tried your track a few times and you're right. It's not possible to slew the MAV-F.

To get a MAV-F-lock onto the T-55 instead the nearby oil rig it's sometimes necessary to (multiple) uncage and (re)cage, sometimes a simple SCS right (sensor priority to the ATFLIR) followed by SCS left (sensor priority back to the MAV-F) helped, but in some cases the hand-off worked instant.

 

FA-18C ATFLIR AGM-65F 04.trk 299.43 kB · 0 downloads FA-18C ATFLIR AGM-65F 01 handoff instant.trk 463.16 kB · 0 downloads FA-18C ATFLIR AGM-65F 02 handoff instant.trk 499.57 kB · 0 downloads FA-18C ATFLIR AGM-65F 03.trk 417.31 kB · 0 downloads

Is this a bug or not (It's not possible to slew the MAV-F)?  IMHO this is a bug.
What do the developers have to say?

 


Edited by SMN

Окурок, выброшенный в урну, гораздо патриотичнее флажочка на автомобиле

TM Wartrhog Stick + VPC MongoosT-50Base + VPC TMW Extension 150mm / TM Wartrhog Throttle / CH Pro Pedals / 2-VPC Deck Mount / TrackIR5/

__________________________________________________________

i76700K Over to 4.6/32GbDD4-3000/MSI-1070Ti Gaming/System-SSD1 DCS-SSD2/32" 2560x1440

Link to comment
Share on other sites

34 minutes ago, shagrat said:

The right MFD with the TGP is selected for control with the TDC. Indicated, by the diamond symbol in the upper right corner.

Switch to the left MFD with the MAV, with SensorSelectSwitch left (check diamond is on the MAV screen) then you control the MAV seeker with the TDC.

It may be necessary to depress TDC to actually command a lock, if it can't lock the tank immediately on slew.

 

There are no difference which MFDs is active (and depress or not TDC) !
Do it yourself in my attached above track!

ATFLIR+AGM-65F_2.jpg


Edited by SMN

Окурок, выброшенный в урну, гораздо патриотичнее флажочка на автомобиле

TM Wartrhog Stick + VPC MongoosT-50Base + VPC TMW Extension 150mm / TM Wartrhog Throttle / CH Pro Pedals / 2-VPC Deck Mount / TrackIR5/

__________________________________________________________

i76700K Over to 4.6/32GbDD4-3000/MSI-1070Ti Gaming/System-SSD1 DCS-SSD2/32" 2560x1440

Link to comment
Share on other sites

38 minutes ago, AstonMartinDBS said:

I've re-tried your track a few times and you're right. It's not possible to slew the MAV-F.

To get a MAV-F-lock onto the T-55 instead the nearby oil rig it's sometimes necessary to (multiple) uncage and (re)cage, sometimes a simple SCS right (sensor priority to the ATFLIR) followed by SCS left (sensor priority back to the MAV-F) helped, but in some cases the hand-off worked instant.

 

FA-18C ATFLIR AGM-65F 04.trk 299.43 kB · 1 download FA-18C ATFLIR AGM-65F 01 handoff instant.trk 463.16 kB · 1 download FA-18C ATFLIR AGM-65F 02 handoff instant.trk 499.57 kB · 1 download FA-18C ATFLIR AGM-65F 03.trk 417.31 kB · 1 download

I'm talking about not able to slew the AGM-65F cursor in this case to correct improper lock.
And about the correct locking the target (tank) immediately instead of the oil rig in AUTO ATFLIR mode - that's another thing!


Edited by SMN

Окурок, выброшенный в урну, гораздо патриотичнее флажочка на автомобиле

TM Wartrhog Stick + VPC MongoosT-50Base + VPC TMW Extension 150mm / TM Wartrhog Throttle / CH Pro Pedals / 2-VPC Deck Mount / TrackIR5/

__________________________________________________________

i76700K Over to 4.6/32GbDD4-3000/MSI-1070Ti Gaming/System-SSD1 DCS-SSD2/32" 2560x1440

Link to comment
Share on other sites

If the intention is to show that the Maverick cannot be manually slewed when an AG designation is present, there is no need to get tracks etc, this is how it's implemented in DCS. As such, it's not a bug, as it is working as intended.

The point is that the implementation is different from the real one (at least according to the -300, it's my only source on that matter), not that it's buggy.

  • Like 1

The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord.

1197644828_Screen_200911_044202-Copy.png.74d8c09ee9060cffd7408a75ab2c13ef.png

38" AW3821DW, Z370 Aorus Gaming 7, i7-8700K, 3090 FTW3 Ultra, 32GB DDR4, 960 Pro, 970 Evo Plus, WD Gold 6TB, Seasonic Prime Platinum
Super Taurus throttle + base, Combat and T/O panels, TM50 base, Hornet grip w/extension, 3 MFDs

F/A-18C, AV-8B, F-16C, JF-17, A-10C (C II), M-2000C, F-14, BS2, UH-1H, P-51D, Sptifire, FC3

Link to comment
Share on other sites

Just now, Harker said:

If the intention is to show that the Maverick cannot be manually slewed when an AG designation is present, there is no need to get tracks

In the following track I tried to demonstrate, that it's impossible to remove an existing AG designation to make the MAF-F seeker proper slewable and get a lock subesquently.

FA-18C ATFLIR AGM-65F 05 slew but no lock.trk

 

I cannot estimate if this is a bug or like IRL or just inproper implemented.

[Modules] A-10C, A-10C II, F-14A/B, F-16C, F/A-18C, FC3, Ka-50, UH-1H, CA, SC

[Maps] PG, NTTR, Normandy, Syria

[PC] Z270F, i7-7700K, 64 GB DDR4-2666, RTX 2080 SUPER 8 GB GDDR6, SSD 970 EVO Plus 1 TB (M.2), 2 x SSD 850 EVO 500 GB (SATA3), 2 TB HDD, TM HOTAS Warthog (Grip@WarBRD Base), MS SW FFB2, Thrustmaster TFRP, TrackIR 5 & TrackClip Pro

[Checklists] A-10C, F-16C, F/A-18C, Ka-50, UH-1H

Link to comment
Share on other sites

Ok, so I checked today. Disclaimer: no real life F/A-18C pilot here, so can not tell if this is true to life or not.

I have realistic TDC enabled in the special options.

Set up a similar scene. Oil rig with a T-55 some 60m away. WP1 is at the base of the Oil rig.

Ingress, make sure Master arm is on, A/G mode selected, TGP on RMFD, stores on LMFD, center MFD HSI.

Box WAYP on center MFD, select WP1, then WPDESG. This slaves TGP and MAV to the designation. TGP should now look at the oil rig.

On LMFD box MAVF and press OSB again to call the MAV video feed. Sensor Select left to get the diamond on the MAV screen, this should uncage the MAV, as well and commands it to look at the oil rig(WP1). It should lock the oil rig.

As long as there is a ground designation, everything is slaved to it!

Now, there are to options. 1) change the designation and Cage/uncage the MAV to slave to the new point (useful if you switch between Markpoints or prearranged waypoints with different targets) or 2) with focus still on the MAV screen, press NoseWheelSteering/undesignate once to remove the INS designation and then depress and hold(!) the TDC while slewing the MAV seeker over the T-55. Releasing TDC depress will command the MAV seeker to attempt a lock.

Again, I can't say if this is the correct implementation, but like this I can operate the MAVF manually.

Please check, if this works the same, for you. 

  • Like 2

Shagrat

 

- Flying Sims since 1984 -:pilotfly:

Win 10 | i5 10600K@4.1GHz | 32GB | GeForce RTX 2080S - Acer XB280HK 28" 4k | TrackIR5 | Simshaker & Jetseat | VIRPIL CM 50 Stick & Throttle | MFG Crosswind Rudder Pedals | TM Cougar MFDs | a hand made UFC | AHCP | 2x Elgato StreamDeck (Buttons galore)

Link to comment
Share on other sites

1 hour ago, shagrat said:

Ok, so I checked today. Disclaimer: no real life F/A-18C pilot here, so can not tell if this is true to life or not.

I have realistic TDC enabled in the special options.

Set up a similar scene. Oil rig with a T-55 some 60m away. WP1 is at the base of the Oil rig.

Ingress, make sure Master arm is on, A/G mode selected, TGP on RMFD, stores on LMFD, center MFD HSI.

Box WAYP on center MFD, select WP1, then WPDESG. This slaves TGP and MAV to the designation. TGP should now look at the oil rig.

On LMFD box MAVF and press OSB again to call the MAV video feed. Sensor Select left to get the diamond on the MAV screen, this should uncage the MAV, as well and commands it to look at the oil rig(WP1). It should lock the oil rig.

As long as there is a ground designation, everything is slaved to it!

Now, there are to options. 1) change the designation and Cage/uncage the MAV to slave to the new point (useful if you switch between Markpoints or prearranged waypoints with different targets) or 2) with focus still on the MAV screen, press NoseWheelSteering/undesignate once to remove the INS designation and then depress and hold(!) the TDC while slewing the MAV seeker over the T-55. Releasing TDC depress will command the MAV seeker to attempt a lock.

Again, I can't say if this is the correct implementation, but like this I can operate the MAVF manually.

Please check, if this works the same, for you. 

Yes, option 2 is work!
ATFLIR+AGM-65F OK.trk
Only it is necessary to perform this procedure as close to the target as possible, because the maverick cursor is not stabilized on the ground!
And this swith off lock the target in ATFLIR and you have to look for the target again


Edited by SMN

Окурок, выброшенный в урну, гораздо патриотичнее флажочка на автомобиле

TM Wartrhog Stick + VPC MongoosT-50Base + VPC TMW Extension 150mm / TM Wartrhog Throttle / CH Pro Pedals / 2-VPC Deck Mount / TrackIR5/

__________________________________________________________

i76700K Over to 4.6/32GbDD4-3000/MSI-1070Ti Gaming/System-SSD1 DCS-SSD2/32" 2560x1440

Link to comment
Share on other sites

Just a quick note:  If you have FLIR loaded, use it to lock whatever target you need to hit... including tiny targets located next to big objects with better contrast. Works pretty good even w/o 'scoop-up' brackets. You can stabilize the FLIR on target area from quite a distance before you can PTRK. Now, when close enough, priority to IR Mav and see if the missile's seeker can lock on your target. Instead of undesignating and using the Mav slewing, I prefer to simply keep my priority on Mav and do a quick 'Cage/Uncage' and see if the seeker locks on correct target. If not, get a little closer and cycle 'Cage/Uncage' again. When I do the cycling, I don't wait till the seeker completes the travel to bore, just a quick cycle. It works good for me. It helps a lot to have the Mav's seeker zoomed to 'narrow' way before the handoff.

Without the FLIR... pain in the butt. It's doable though. With one target only, no problem. With multiple targets in the same area, I always approach in a shallow dive making sure that after the first missile has been fired, the next missile's bore is roughly pointed at the target area. Then, it's just a quick slew...  It would be very helpful if we could handoff the stabilized position from the first missile to Hornet's MC, so the following missiles would uncage right to it, instead of bore LOS. Or... When slewing the first missile, all the other ones follow and be ready...😉


Edited by Gripes323
  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Honestly Id say the best way to do it is just markpoints....or I think since its only an ATFLIR issue, just use the Litening pod instead.

Intel 8086k @ 5.4ghz | 32gb GSkill Trident Z | Asus Z370 Maximus X Formula| Asus TUF 3080Ti | eVGA 1000w psu | Slaw RX Viper 2 pedals | VKB Gunfighter Mk3 MCE Ultimate / Virpil MongoosT50 |  HP Reverb G2 | Windows 10 Pro

If you have no time to fly all of your airplanes, you have too many...like me.


 My wallpaper and skins

JTF-13 Recruiting

Link to comment
Share on other sites

  • 2 months later...
On 9/4/2021 at 3:00 PM, shagrat said:

Now, there are to options. 1) change the designation and Cage/uncage the MAV to slave to the new point (useful if you switch between Markpoints or prearranged waypoints with different targets) or 2) with focus still on the MAV screen, press NoseWheelSteering/undesignate once to remove the INS designation and then depress and hold(!) the TDC while slewing the MAV seeker over the T-55. Releasing TDC depress will command the MAV seeker to attempt a lock.

That works great - as long as ATFLIR is in INR mode. But the MAV seeker isn't slewable when the ATFLIR is in SCENE or AUTO mode, because the MAV re-slaves continuously to the ATFLIR designation. It's impossible to brake this constant designation update/re-slave loop with undesignate, while ATFLIR is in SCENE or AUTO mode and sensor priority is on the MAV format page.

I don't think, that this is as intended, because I don't see any reason for that behaviour.


Edited by AstonMartinDBS
  • Like 1

[Modules] A-10C, A-10C II, F-14A/B, F-16C, F/A-18C, FC3, Ka-50, UH-1H, CA, SC

[Maps] PG, NTTR, Normandy, Syria

[PC] Z270F, i7-7700K, 64 GB DDR4-2666, RTX 2080 SUPER 8 GB GDDR6, SSD 970 EVO Plus 1 TB (M.2), 2 x SSD 850 EVO 500 GB (SATA3), 2 TB HDD, TM HOTAS Warthog (Grip@WarBRD Base), MS SW FFB2, Thrustmaster TFRP, TrackIR 5 & TrackClip Pro

[Checklists] A-10C, F-16C, F/A-18C, Ka-50, UH-1H

Link to comment
Share on other sites

I’ve been following this topic and I have found that the solutions mentioned work great when playing on a 2D monitor, but they don’t work when I try them in VR (Reverb G2). In 2D, I can slew the MavF seeker no problem, but using the same procedure in VR, no force on earth can get it to slew. That’s been my experience at least. 
 

Has anyone else tested it in 2D vs VR? If it’s only happening to me then I’m sure I did something stupid that I haven’t figured out yet. Wouldn’t be the first time!

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...