correct as is TWS Loses Lock

[SharpeXB]

The radar consistently loses lock in TWS mode. Tracks attached. Stable version 2.7.5.10869

lostlock3.zip

Edited August 19, 2021 by SharpeXB

[BIGNEWY]

Hi SharpeXB

 

Have you seen this video yet? it may help

 

 

[Hulkbust44]

Make sure you have increased the brick timeout on the data sublevel. ED incorrectly modeled it to where the entire trackfile is deleted after the specified timeout. Only bricks should be affected.

Mobius708

[SharpeXB]

2 hours ago, BIGNEWY said:

Have you seen this video yet? it may help

I’ve seen that. And read the manual etc etc. I don’t see why when you’ve locked a target it continually gets unlocked unless it was notching or something. These aren’t. The only other A2A radar I use is the M-2000C and it never does this. You lock a target and lock means lock. 

[opps]

1.  You are using TWS MAN. This means RADAR tries to track contact but won't adjust azimuth and elevation. You have to adjust those to maintain track in this mode. TWS AUTO automatically adjust azimuth and elevation to track L&S target. Use TWS AUTO.

 

2.  Set TARGET AGING. This is clearly explained in above wags video and  @Hulkbust44 's post. Default aging setting is by no means usable.

 

I always set TARGET AGING to 16 and TWS AUTO track L&S target just fine in BVR regime.

Edited August 20, 2021 by opps

[SharpeXB]

2 hours ago, opps said:

1.  You are using TWS MAN. This means RADAR tries to track contact but won't adjust azimuth and elevation. You have to adjust those to maintain track in this mode. TWS AUTO automatically adjust azimuth and elevation to track L&S target. Use TWS AUTO.

 

2.  Set TARGET AGING. This is clearly explained in above wags video and  @Hulkbust44 's post. Default aging setting is by no means usable.

 

I always set TARGET AGING to 16 and TWS AUTO track L&S target just fine in BVR regime.

 

Thanks, that solved it.