Cowboy10uk Posted August 18, 2021 Share Posted August 18, 2021 Hi guys, I’m trying to add a P51 25 or 30 to a mission file. Now whatever I do, whenever I try and choose that slot to see if it’s working, DCS goes into a flyby view and then hovers over another random aircraft. I have other client aircraft in the mission, including Other P51s, spitfires and P47s. I can join ALL of these with no issues, including the other P51s that came with the mission, that I’m adjusting. Trying to get us all to start at Hawkenge on the channel map. any one have any ideas where I’m going wrong? [sIGPIC][/sIGPIC] Fighter pilots make movies, Attack pilots make history, Helicopter pilots make heros. :pilotfly: Corsair 570x Crystal Case, Intel 8700K O/clocked to 4.8ghz, 32GB Vengeance RGB Pro DDR4 3200 MHZ Ram, 2 x 1TB M2 drives, 2 x 4TB Hard Drives, Nvidia EVGA GTX 1080ti FTW, Maximus x Hero MB, H150i Cooler, 6 x Corsair LL120 RGB Fans And a bloody awful Pilot :doh: Link to comment Share on other sites More sharing options...
Wexler Posted August 18, 2021 Share Posted August 18, 2021 I am not sure, but maybe the start time could be problem? if the time is yet to come, and you choose that slot, you wait till the time come. If I remember correctly. (the bottom line of your setting on the picture) Ryzen 7 2700X | MSI Trio 1080Ti | MSI X470 Plus Motherboard | 32GB Kingston HyperX Predator 2933 DDR4 | M.2 XPG GAMMIX S11 Pro SSD | Virpil Mongoost-50 throttle | Thrustmaster Warthog Stick | MFG Crosswind | Rift S Link to comment Share on other sites More sharing options...
nighteyes2017 Posted August 18, 2021 Share Posted August 18, 2021 you could also check the base stores. see if the base stores actually have that plane at the base. if the base number of planes says 0, then you cant spawn that plane there. You can plan it, but it wont spawn. Link to comment Share on other sites More sharing options...
Recommended Posts