Jump to content

HP G2 pushing out updated cables


Burt

Recommended Posts

I just got off the phone with HP VR support and wanted to let y’all know that he said that they are wanting to send updated G2 cables out to customers especially AMD users. The new cable and power brick has a switch on it now. Guy was real friendly and very helpful. I am not 100% sure but the new part # from what I gathered is 

M52188-001

 

If this has already been addressed here sorry. 
 

I called this support # 1-281-377-1382

 

i told them I was having issue with audio and troubleshooted that the cable was at fault where the pigtail goes in the little power brick.


Edited by Burt
  • Like 2

ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090  - XFURY 64GB -3400 MHz RAM

Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts 

RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia

Start Date April 2020 

 

Link to comment
Share on other sites

That's great, thanks, I'm still having intermittent 7-14 or 1-4 errors when trying to use my G2 sometimes. Mostly a disconnect / reconnect and sometimes a reboot helps, but a new cable / powerbrick which eliminates this would be very nice. I'm going to try fetching one from HP support.

 

 

AMD Ryzen 7 5800X3D, MSI X570 Tomahawk, 32GB G.Skill F4-3600C15D @ 3866C14, ASRock Taichi 7900XTX, HP Reverb G2, VPC WarBRD-D & Thrustmaster F16 Viper & F18 Super Hornet, Thrustmaster Warthog Throttle.

Link to comment
Share on other sites

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | HP Reverb G2 | DIY Head Tracker Cap | Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Link to comment
Share on other sites

Got 1 on the way. The guy on the phone seemed really convinced that this wouldn't help MY issue considering my current MB (ASrock B550M). But I had the same issues with my previous board (MSI B450 Tomahawk). Both current on BIOS updates.

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | HP Reverb G2 | DIY Head Tracker Cap | Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Link to comment
Share on other sites

Yeah well mine was not really bad or having issues I just heard it from the grape vine about the update cables so I have around 4 months warranty left so might as well get it now. I hope I’m able to keep the original one for backup. Sr. I hope it works for ya.

ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090  - XFURY 64GB -3400 MHz RAM

Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts 

RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia

Start Date April 2020 

 

Link to comment
Share on other sites

4 minutes ago, Burt said:

Yeah well mine was not really bad or having issues I just heard it from the grape vine about the update cables so I have around 4 months warranty left so might as well get it now. I hope I’m able to keep the original one for backup. Sr. I hope it works for ya.

 

I actually had the stock cable replaced just a couple months ago, and wasn't required to send to old one back. A working back up would be nice.

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | HP Reverb G2 | DIY Head Tracker Cap | Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Link to comment
Share on other sites

57 minutes ago, unlikely_spider said:

Any difference other than the power switch? I unplug mine when I'm done anyway. My first cable died and they just replaced it, though with the same old cable 😞

I don’t think so… I will eventually find out soon. Hoping for alittle bit a smoothness maybe. I would try to get the updated one if possible you may have tell a sweet lie tho. But honestly the guy told me tell forward this to anyone I know with a G2. So go for it ! It’s the updated version of the cable and powerbrick.


Edited by Burt
  • Thanks 1

ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090  - XFURY 64GB -3400 MHz RAM

Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts 

RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia

Start Date April 2020 

 

Link to comment
Share on other sites

1 hour ago, unlikely_spider said:

Any difference other than the power switch? I unplug mine when I'm done anyway. My first cable died and they just replaced it, though with the same old cable 😞

Guy I was on the phone with made it sound like this is just the power switch.

 

Here is a pic of both

 

 

20210722_153936.jpg

  • Thanks 1

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | HP Reverb G2 | DIY Head Tracker Cap | Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Link to comment
Share on other sites

So where’s the power switch ?

ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090  - XFURY 64GB -3400 MHz RAM

Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts 

RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia

Start Date April 2020 

 

Link to comment
Share on other sites

Is this a free warranty replacement? Or do I need to order it? I am using an AMD X570 board (Asus Dark Hero VIII), which would benefit from this new power supply cable. I should eliminate some of the glitches I am seeing and also permit me to use my native USB-C port, which presently does not work with the G2. So, whether it is free or not, I want to get this as soon as possible.

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

1 hour ago, streakeagle said:

Is this a free warranty replacement? Or do I need to order it? I am using an AMD X570 board (Asus Dark Hero VIII), which would benefit from this new power supply cable. I should eliminate some of the glitches I am seeing and also permit me to use my native USB-C port, which presently does not work with the G2. So, whether it is free or not, I want to get this as soon as possible.

It's a free upgrade. I just got a message and mine is shipped .... But it looks like they may want the original/defective cable assembly back according to the email. So I'll probably be paying for it because I want to keep it for a backup.

 

Important – Return procedure

HP, in most cases, requires the return of the good and/or defective parts associated with your CSR event. HP encourages you to return the part within three days of receipt.

Failure to return the part may result in the billing for the cost of the replacement part. 

 

Here the contact #  HP Technical Specialists are available 24/7 at 1-800-334-5144

 


Edited by Burt

ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090  - XFURY 64GB -3400 MHz RAM

Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts 

RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia

Start Date April 2020 

 

Link to comment
Share on other sites

Are those experiencing problems using a standalone PCI-e USB 3.X card and have upgraded their MoBo drivers?


Edited by C3PO

Now: Water-cooled Ryzen 5800X + 32GB DDR 4 3200 RAM + EVGA 3090 FTW3 Ultra 24 GB + Reverb G2 + Add-on PCI-e 3.1 card + 2x1TB Corsair M.2 4900/4200 + TM HOTAS Warthog + TM TPR Pendular Rudder  'Engaged Defensive' YouTube Channel

Modules: F/A-18C / AV-8B / F-16 / F-15E / F-4E (when it lands) / Persian Gulf / Syria / Nevada / Sinai / South Atlantic

Backup: Water-cooled i7 6700K @ 4.5GHz + 32GB DDR4 3200MHz + GTX 1080 8GB + 1TB M.2 1k drive & 250GB SSD drive 500MBps 4K 40" monitor + TrackIR 5

 

 

Link to comment
Share on other sites

WOW! that was fast. Like less than 24hours fast.

 

It is in fact a new power adapter AND HMD cable.

Edit: not sure why I thought the cable plugged to the power brick, like the Vive.

 

 

cable.jpg


Edited by Sr.

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | HP Reverb G2 | DIY Head Tracker Cap | Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Link to comment
Share on other sites

2 hours ago, Burt said:

It's a free upgrade. I just got a message and mine is shipped .... But it looks like they may want the original/defective cable assembly back according to the email. So I'll probably be paying for it because I want to keep it for a backup.

 

Important – Return procedure

HP, in most cases, requires the return of the good and/or defective parts associated with your CSR event. HP encourages you to return the part within three days of receipt.

Failure to return the part may result in the billing for the cost of the replacement part. 

 

Here the contact #  HP Technical Specialists are available 24/7 at 1-800-334-5144

 

 

My invoice doesn't mention anything about returning, only that they encourage "recycling."

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | HP Reverb G2 | DIY Head Tracker Cap | Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Link to comment
Share on other sites

Just ordered my new cable under warranty with no questions asked.  The support tech stated cables are normally considered "consumables" and do not need to be returned.  The exception would be if you received your new cable along with a prepaid return label.  The "Return Procedure" is just a generic advisory.

 

This is the second time I have dealt with HP support and each time I have been very impressed with their high quality of customer service!

i9 10900KF 3.70GHz (5.30GHz Turbo), MSI RTX 4090 OC 24GB, ASUS Z590-E GAMING Motherboard, CORSAIR Vengeance 64GB DDR4 3600MHz, 2TB Intel 660P M.2 NVMe SSD, Virpil Alpha Joystick, T-50CM3 Throttle, MFG Xwind rudder pedals, Pimax Crystal VR.

Link to comment
Share on other sites

Cool deal I’m hoping that’s my case too…. Thanks !

3 hours ago, Sr. said:

WOW! that was fast. Like less than 24hours fast.

 

It is in fact a new power adapter AND HMD cable.

Edit: not sure why I thought the cable plugged to the power brick, like the Vive.

 

 

cable.jpg

 

Awesome ! I’m getting excited now like when I first got the G2.

ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090  - XFURY 64GB -3400 MHz RAM

Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts 

RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia

Start Date April 2020 

 

Link to comment
Share on other sites

Just received mine ! Great Customer Service and Communication. Alittle over 24 hrs ship time not bad at all HP !  I really like to power button, I go 2D mode every once in awhile especially on the weekend mornings with a few cups of coffee and practicing. No return notice either so I now have a backup cable. Highly recommend if your within the warranty envelope as said above thats a pricey cable.  

ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090  - XFURY 64GB -3400 MHz RAM

Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts 

RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia

Start Date April 2020 

 

Link to comment
Share on other sites

Glad to hear you had good support because what II’ve seen was pure crap support on my end especially from the HP Canada. No one answering their phones and no one answering the Chats. But I will say the Caribbean support which the number above puts you through the was fantastic support and tied me right to 

North American support. 
Let me ask you. Did you have to send them a pic of the serial number on the iheadset and proof of purchase? 


Edited by Wood

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

 

On 8/3/2021 at 8:24 PM, Sr. said:

 

An official HP representative has posted something official via a reddit thread about the newer revision of cable. You can find it here

Full URL: 

 


Edited by Dodge

Regards,
Paul "Dodge / LondonLad" 


SYSTEM SPECS: AMD Ryzen 7 5800x , 64GB 3600MHz RAM, ASUS ROG Strix X570-F Gaming, NVIDIA RTX 3070 8GB GDDR6, IIYAMA 34" Curved GB3466WQSU Monitor, VPC WarBRD-D Base, VPC MongoosT-50CM2 Grip, Thrustmaster HOTAS Throttle, VPC ACE Interceptor PedalsVKB Pedals (v4) (backup)  + TM MFD w/CUBESIM (x2), PointCTRL, HP Reverb G2 VR  Headset, Oculus Quest 2 VR Headset, & TrackIR

Group: DCAF (Now Left, but a great group to be apart of - UK Based)

Link to comment
Share on other sites

5 hours ago, Wood said:

Glad to hear you had good support because what II’ve seen was pure crap support on my end especially from the HP Canada. No one answering their phones and no one answering the Chats. But I will say the Caribbean support which the number above puts you through the was fantastic support and tied me right to 

North American support. 
Let me ask you. Did you have to send them a pic of the serial number on the iheadset and proof of purchase? 

 

 

No, you will not have to send a photo. Just provide them with the device serial number (located on headset, left of the lens in my instance - it's a small sticker), as well as other information (name, address etc.). If it's in stock then you'll get it next day. The G2 is considered a business product so you get business level support (I believe next business day 'NBD') when/where stock allows.

Regards,
Paul "Dodge / LondonLad" 


SYSTEM SPECS: AMD Ryzen 7 5800x , 64GB 3600MHz RAM, ASUS ROG Strix X570-F Gaming, NVIDIA RTX 3070 8GB GDDR6, IIYAMA 34" Curved GB3466WQSU Monitor, VPC WarBRD-D Base, VPC MongoosT-50CM2 Grip, Thrustmaster HOTAS Throttle, VPC ACE Interceptor PedalsVKB Pedals (v4) (backup)  + TM MFD w/CUBESIM (x2), PointCTRL, HP Reverb G2 VR  Headset, Oculus Quest 2 VR Headset, & TrackIR

Group: DCAF (Now Left, but a great group to be apart of - UK Based)

Link to comment
Share on other sites

10 hours ago, Wood said:

Glad to hear you had good support because what II’ve seen was pure crap support on my end especially from the HP Canada. No one answering their phones and no one answering the Chats. But I will say the Caribbean support which the number above puts you through the was fantastic support and tied me right to 

North American support. 
Let me ask you. Did you have to send them a pic of the serial number on the iheadset and proof of purchase? 

 


just serial number and I also had an HP account and register my G2 on day one. No pics sent.


Edited by Burt

ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090  - XFURY 64GB -3400 MHz RAM

Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts 

RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia

Start Date April 2020 

 

Link to comment
Share on other sites

i actully called in yesterday and ordered a new cable with out my Headset showing a warrenty because of some glitch i guess. Just bought my headset three days ago

and i guess when they first came out something happened and not all headset warrentys got entered.

 

anyways he ordered the new cable for me with no issues after a little back and forth about my MB.

and i recieved it today at 10AM. So the turn around was like 15 hours?

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...