IkarusC42B Pilot Posted June 6, 2021 Share Posted June 6, 2021 (edited) Radar speed gate and rdr/jmr priority filter options Edited June 7, 2021 by IkarusC42B Pilot Link to comment Share on other sites More sharing options...
Harker Posted June 7, 2021 Share Posted June 7, 2021 +1. Both of these are important in the correct operation of the radar and the jammer. Especially the letter is pretty critical, so we won't have to manually use the ECM knob every time. 2 The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
WobblyFlops Posted June 8, 2021 Share Posted June 8, 2021 On 6/7/2021 at 5:14 PM, Harker said: +1. Both of these are important in the correct operation of the radar and the jammer. Especially the letter is pretty critical, so we won't have to manually use the ECM knob every time. The speed gate is selectable now, but I haven't had enough time to actually test it. Link to comment Share on other sites More sharing options...
Harker Posted June 8, 2021 Share Posted June 8, 2021 The speed gate is selectable now, but I haven't had enough time to actually test it.You're right. I assumed it didn't do anything because it wasn't mentioned in the changelog, I'll test it out. Thanks. 1 The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
IkarusC42B Pilot Posted June 9, 2021 Author Share Posted June 9, 2021 11 hours ago, WobblyFlops said: The speed gate is selectable now, but I haven't had enough time to actually test it. wha...really? Link to comment Share on other sites More sharing options...
WobblyFlops Posted June 9, 2021 Share Posted June 9, 2021 20 minutes ago, IkarusC42B Pilot said: wha...really? Yup, it's a weird change because they didn't even talk about it in the patch notes. Hopefully this means that eventually all the other relevant missing features of the radar will get implemented. I'd add quick look, ECCM (which is marked in the official manual as 'coming later') and maybe even an engine wide support for different radar channels, which would be cool. Link to comment Share on other sites More sharing options...
Harker Posted June 9, 2021 Share Posted June 9, 2021 Tested, I can't see a difference between NORM and WIDE. WIDE should only show high speed targets, while norm should medium and high speed. Tested with targets ranging from M 0.3 to M 1.0 and found no difference whatsoever. All targets were close to each other and were detected together. Looks like the option change does nothing. The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
IkarusC42B Pilot Posted June 9, 2021 Author Share Posted June 9, 2021 (edited) 38 minutes ago, Harker said: Tested, I can't see a difference between NORM and WIDE. WIDE should only show high speed targets, while norm should medium and high speed. Tested with targets ranging from M 0.3 to M 1.0 and found no difference whatsoever. All targets were close to each other and were detected together. Looks like the option change does nothing. i knew it was too beautifull to be true Edited June 9, 2021 by IkarusC42B Pilot Link to comment Share on other sites More sharing options...
Bunny Clark Posted June 9, 2021 Share Posted June 9, 2021 Well, at least it's evidence it's being worked on. Hopefully it means actual function is close at hand. Oil In The Water Hornet Campaign. Bunny's: Form-Fillable Controller Layout PDFs | HOTAS Kneeboards | Checklist Kneeboards Link to comment Share on other sites More sharing options...
Harlikwin Posted June 9, 2021 Share Posted June 9, 2021 14 hours ago, WobblyFlops said: Yup, it's a weird change because they didn't even talk about it in the patch notes. Hopefully this means that eventually all the other relevant missing features of the radar will get implemented. I'd add quick look, ECCM (which is marked in the official manual as 'coming later') and maybe even an engine wide support for different radar channels, which would be cool. Different radar channels would be interesting from an ECM standpoint. 3 New hotness: I7 9700k 4.8ghz, 32gb ddr4, 2080ti, :joystick: TM Warthog. TrackIR, HP Reverb (formermly CV1) Old-N-busted: i7 4720HQ ~3.5GHZ, +32GB DDR3 + Nvidia GTX980m (4GB VRAM) :joystick: TM Warthog. TrackIR, Rift CV1 (yes really). Link to comment Share on other sites More sharing options...
Harlikwin Posted June 9, 2021 Share Posted June 9, 2021 4 hours ago, Harker said: Tested, I can't see a difference between NORM and WIDE. WIDE should only show high speed targets, while norm should medium and high speed. Tested with targets ranging from M 0.3 to M 1.0 and found no difference whatsoever. All targets were close to each other and were detected together. Looks like the option change does nothing. Which setting sees the missiles coming at you now? New hotness: I7 9700k 4.8ghz, 32gb ddr4, 2080ti, :joystick: TM Warthog. TrackIR, HP Reverb (formermly CV1) Old-N-busted: i7 4720HQ ~3.5GHZ, +32GB DDR3 + Nvidia GTX980m (4GB VRAM) :joystick: TM Warthog. TrackIR, Rift CV1 (yes really). Link to comment Share on other sites More sharing options...
Recommended Posts