Jump to content

Monster Tech Horizontal Beam on WarBRD / CM3 / NXT


Sandy
 Share

Recommended Posts

Hello there,

 

I'm about to buy the MonsterTech Table Mounts in their long version.

I want to use it with the Constellation Alpha on WarBRD Base, CM3 and Gladiator NXT. I won't be using any extensions.

 

The long mounts ship with longer horizontal beams.

 

I wonder if, on this hoizontal beam, the WarBRD, CM3 and NXT can be pushed all the way back or if I should order the 7cm short profiles as well that Monstertech offers here.

 

On the MongoosT Base, this seems impossible. Maybe anyone can clarifiy on this. Here's a video from Jabbers of what I am talking about:

 

 

 

Link to comment
Share on other sites

The NXT can, since its mounting plate sits on top of the horizontal profile and the mounting holes are far enough out for the screw heads to clear the profile (I did this with a Gladiator II). CM3 uses the same adaptor plate as the MongoosT so I suspect it'll have the same problem.

 

I'd suggest getting a couple of short profiles anyway, or buy an 80x40mm extrusion off Amazon and cut pieces to length as you require.

Link to comment
Share on other sites

Posted (edited)
On 5/24/2021 at 3:34 PM, jym said:

The NXT can, since its mounting plate sits on top of the horizontal profile and the mounting holes are far enough out for the screw heads to clear the profile (I did this with a Gladiator II). CM3 uses the same adaptor plate as the MongoosT so I suspect it'll have the same problem.

 

I'd suggest getting a couple of short profiles anyway, or buy an 80x40mm extrusion off Amazon and cut pieces to length as you require.

 

Thank you for your reply. I realized MonsterTech is running a Discord Server where they answer questions directly. They answered my question immediately which is awesome, did not expect that at all. WarBRD and CM3 Throttle should work just as fine as the NXT, just as I intended.


Edited by Sandy
Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...