Jump to content

[USER ERROR] M-2000 strange bugs


303_Vins
 Share

Recommended Posts

Posted (edited)
They robbed Mirek with this tear. After using the 530 mode, you cannot uncheck 530. 
You uncheck and then select Neutral and there is a check again. 
It is impossible to completely enter APProach mode. Does not find ILS. 
Second BUG: You will lock an air target and never unlock it anymore. You need to disable RDR. 
Selective jettison does not automatically deselect. The lamp is not on, but it is marked in the memory ..... AFTER the dump of the tank, the tanker refills endlessly. Bug on bug !!!
[01:41]
I already felt like Mirek

 

Edited by 303_Vins
Link to comment
Share on other sites

Posted (edited)
39 minutes ago, 303_Vins said:

It is impossible to completely enter APProach mode. Does not find ILS.

Are you sure ILS is active for that runway (the active runway and ILS is affected by wind direction and strength)

 

 I've had no issues in Open Beta 2.7.1.6430, check :

  • ILS is tuned correctly
  • ILS is transmitting (adjust ILS volume / check audio ID / check HSI flags)
  • Altimeter is set to the correct QFE
  • the currently selected waypoint has the correct CP/PD (Runway (True) Heading/Desired (Glide) Slope)
  • APP is selected on the PCA and you're in NAV mode

Note: the HUD synthetic runway will only display while the localiser and glide slope signals are being received.

 

Please post a short track if you continue to have issues with the ILS.

 


Edited by Ramsay

i9 9900K @4.7GHz, 32GB DDR4, RTX2070 Super 8GB, 1TB NVMe, 6+4TB HD, 1+1TB SSD, MSFFB2 joystick, X52 Pro Throttle, TIR5, Win 10 Pro x64, 1920X1080

Link to comment
Share on other sites

Posted (edited)

Aside from the refuelling issue that his a very old issue, and that is indeed not fixed in latest OB, i don't have any of the issue your are describing.

 

I can exit 530 mode without any issue after having fired all my 530, i just click on 530 PCA button (530 is not displayed anymore as all have been fired) and i'm back in navigation mode with APP mode available.

No issue with ILS. As mentionned by Ramsey, ILS might not be active at your airport. You need to have strong enough wind to have the ILS activated (ED issue/feature). You can check you get ILS bars on the "Boule"

 

No issue with unlocking target. i'm pretty sure you are speaking of DO tracks that appear when you unlock or lost lock on a target. If you don't want DO tracks to be created when your are unlocking a target, you need to unselect RDO mode on PCA. They will still appear though if you lose radar contact. To remove DO track displayed, right click on Theta button on bottom left side of VTB.

 

No issue with selective jettison, works as expected.

 

 


Edited by Steph21
Link to comment
Share on other sites

1- WPT is defined as Landing WPT.

2- Kobuleti 111.50 ILS  76X TACAN

3- Mirage receive ILS tone  audio.

4-everything stored as it should be.

5- No ILS symbology on HUD, no ILS on ADI

6-HSI stored TAC

7- ALT RDR & ALT RDR indication is on.

 

 Afer using 530, or checked by button in weaponry  panel.  U can uncheck. But when return system to 'Neutral"  530 is checked again.

After using selective Jettison, for example  Mk-82. System do not uncheck it. The S disappear but it is still checked. Try and uncheck, than U will se the difference.

Some combinations of check and uncheck on taht panel builds internal bug.

Link to comment
Share on other sites

Posted (edited)

If you think CP/PD, they would be automatically set as he uses a landing waypoint.

I have no issue with ILS approach on Kobuleti. 

Either it's that ILS is not activated at Kobuleti because of wind, either you are screwing your approach. You have to be in the ILS cone. But there's no bug with ILS 


Edited by Steph21
Link to comment
Share on other sites

Posted (edited)

I wrote.... There is probably BUG after using Selective jettison.... Look PLS

Why people read just piece of text ? Pull from context...

What i did.  I have deleted bugged mission. It helped.

Im affraid problem reappear when i use Selective jettison again....

I suppose there is BUG with Mirage when using Selective stores Jettison.

After this, weaponry system do not function properly. RDR do not unlock TGT.  Must switch off RDR to clean its memory.

Starting mission again  and choosing Mirage crashes DCS. Not always but most of cases.

Finally, reinstalled Mirage module, deleted bugged mission.

Now ILS function well. No DCS Crashes.  Im going to test weaponry system. And never use Selective jettison....


Edited by 303_Vins
Link to comment
Share on other sites

Posted (edited)

O Yes. Why not ?

Does this combination  makes bug ?

Bug apeared in this config.   I have jetisoned Mk-82 an begun AA fight with 530....

And everything goes wrong in system....

I got another question.

Why the hell normal ILS do not function on HUD but on ADI. he?

Should I use only runway predefined as landing WPT ?

FC-3 is more functional....

 

 

 

 


Edited by 303_Vins
Link to comment
Share on other sites

Posted (edited)

Why don't you read the manual and the update presentation post before reporting a bug ?

 

As people pointed it to you there are no bugs here, all your problems results for you not setting the aircraft correctly :).

 

The only bug you are seeing is the system not working correctly after jettison, you fix it by deselecting the jettisoned store before exiting the jettison mode.

 

It is fixed internaly and should be available in a few weeks.


Edited by myHelljumper
  • Like 1

Helljumper - M2000C Guru

 

Helljumper's Youtube

https://www.youtube.com/channel/UCK3rTjezLUxPbWHvJJ3W2fA

Link to comment
Share on other sites

48 minutes ago, myHelljumper said:

Why don't you read the manual and the update presentation post before reporting a bug ?

 

As people pointed it to you there are no bugs here, all your problems results for you not setting the aircraft correctly :).

 

The only bug you are seeing is the system not working correctly after jettison, you fix it by deselecting the jettisoned store before exiting the jettison mode.

 

It is fixed internaly and should be available in a few weeks.

 

Yes?  Go fly some hours and test !!!!!!!!!!!!!!!!!!!

Plendy BUG aircraft

Link to comment
Share on other sites

Posted (edited)

So. The witness is not anough ?  Without csreens or tracks U will not check it ?

I do not have reason to lie.

I`ll give You my last example.

Wind DM-060 (240 Nav) 6 kts.

I defined center of Kutaisi RWY as WPT-5 with correct ground elevation.

Defined Kobuleti as Landing WPT-6.

Tryed to land ILS at Kutaisi.  TH=074.0 degs. elevation 148 ft.  Stored NAV, all staff as should be in cockpit. Slope 3 degs.

Only ADI ILS indication appeared. No HUD indications.

So tried to land at Kobuleti TH= 070.0, Slope 3 degs. All instruments correct. ILS111.50. TACAN 67X. WPT-6....

And.... No Course line on HUD. Synthetic runway appeared at the top of HUD. Not on the ground.

Previously landed at Kobuleti was correct indications. When did not edit WPTs.

Screen_210523_072506.png

Screen_210523_072531.png

Screen_210523_072623.png

Screen_210523_072706.png

 

PLS DO NOT TELL ME I`M NOT ABLE TO SET INSTRUMENTS CORRECTLY.


Edited by 303_Vins
Link to comment
Share on other sites

Posted (edited)

Chuck`s guide says about Declination input in INS.  It is not obligatory.  Anoug is to put in True heading directly. Than set HSI to NAV/TH mode. As U can see in screens above i fly TH on HUD 070. This is Kobuleti RWY 07 TH. Magnetic is 064.

The problem is... Not always ILS fuction correctly.

And function only for RWY predefined as Landing WPT in Mission Editor.

I`m well prepared to fly any mission at any map.... I did make kneeboards.

Caucasus for example:

https://drive.google.com/file/d/15UUIVxgW0_27AGLm7et0pMG1P6kNFlua/view?usp=sharing

I never use F10 Newbie, unreallistic view. :))


Edited by 303_Vins
Link to comment
Share on other sites

2 hours ago, 303_Vins said:

PLS DO NOT TELL ME I`M NOT ABLE TO SET INSTRUMENTS CORRECTLY.

 

 

YOU'RE NOT ABLE TO SET INSTRUMENTS CORRECTLY

 

You say you defined kobuleti as WP 6 but you land at kobuleti with WP 5 in HUD.

You don't mention QFE setting.

  • Like 1
Link to comment
Share on other sites

Posted (edited)

Yes. Look at screens above. Without this setting is impossible to use ILS properly.

Do You need more ?? The screens says EVERYTHING MUST BE SET CORRECTLY.

If i did not mention it is not equal i did not use...

Some more brain work PLS.

Screens were made before WPT edition. I this case WPT-5 was the Kobuleti.  Everithing functioned well.

I made tests with WPT-5 Kutaisi and WPT-6 Kobuleti than....

WPT-6 was Landing defined this time.

Wghat U do not undestand ?

 


Edited by 303_Vins
Link to comment
Share on other sites

 

1 minute ago, 303_Vins said:

Yes. Look at screens above. Without this setting is impossible to use ILS properly.

Do You need more ?? The screens says EVERYTHING MUST BE SET CORRECTLY.

If i did not mention it is not equal i did not use...

Some more brain work PLS

 

Can you answer my questions please ?

 

What version do you use and what is the problem ?

Helljumper - M2000C Guru

 

Helljumper's Youtube

https://www.youtube.com/channel/UCK3rTjezLUxPbWHvJJ3W2fA

Link to comment
Share on other sites

Posted (edited)

Barren discusion.

SeeU.

The latest... 2.7.1......last one

Waypoints were edited in mission editor.  6- Kobuleti Landing. 5- Kutaisi with correct elevation CP/PD correct in both cases SET.... TY !


Edited by 303_Vins
Link to comment
Share on other sites

Posted (edited)

Why You people do not read all with understanding?

Screens are from previous mission as i have wroten before.

Next I wrote....After editing WPTS in Mission Editor.

Than flew new mission with WPT-5 and 6 as i Have mentioned above.

some screens...

Mission editor

https://drive.google.com/file/d/1BIl2kFk86yUFtZbc_2oOFP6UH71Dl0XQ/view?usp=sharing

Instrument Settings

https://drive.google.com/file/d/16bPvOVEKpwMGn2t6lkjY9zeyHiiKnO3G/view?usp=sharing

https://drive.google.com/file/d/1ke5spKNk4QYPfFiZ_mcdgNPqajx4wTje/view?usp=sharing

https://drive.google.com/file/d/185sGI29XYKqGWzkZQFoiNhDpDR-O19up/view?usp=sharing

 

Effects

Incorrect WPT Indication on HUD. (opposite to HSI)

https://drive.google.com/file/d/1LjZchk4xylDwStSKzPrpE8UGICe9NxRY/view?usp=sharing

runway

https://drive.google.com/file/d/1H1jVaesvcsbMfwX6JDETuW1kIyiytjO2/view?usp=sharing

https://drive.google.com/file/d/1hrKMPf9dhYagNmGTjMKPJYRDNgRayVqe/view?usp=sharing

https://drive.google.com/file/d/1xjnJ2_jngWmJzzXMnKmvZwgzcrCAaPdr/view?usp=sharing

https://drive.google.com/file/d/1ya0lNTVNmnU43U_4cJ-NM_ZVKbYSZtpV/view?usp=sharing

 

WHERE is WPT ?

HERE.  Probably drifted because of Alignement done using external power. That may be the problem.

https://drive.google.com/file/d/1P-jHB4VS1byblDNyjreAzASiRTgZx4ve/view?usp=sharing

 

As U see instruments are correct.

Probably the cause is Alignement executed using external electric source . Probles happens every time i make ILS Alignement that way.

Goin to check normal start...

ADI shows ILS neddles correctly.

By the way. U really funny guy Kercheiz. Troll master


Edited by 303_Vins
Link to comment
Share on other sites

It is no problem having waypoint far away from ILS airport. System only uses runway heading value from PCN of current WP. If WP is 1000nm away is no problem.

 

In current version it is not needed that flight plan is made in editor to support ILS with synthetic runway. All can be done sitting in the seat.

  • Like 2
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...