Jump to content

Start up - Eng issue


Recommended Posts

Hi guys; having a issue how to start up, i start the engine and let it run up to 92RPM, before I just used to move my throttle from the idle position for the engine to kick in. I am flying the sky warrior campaign on mission 3 (cold start) and when I try to move my throttle nothing happens??? I have tried to click the throttle control lever with the mouse too and still nothing ? Do you guys have any ideas 💡 ? Thanks 

Rig: |(CPU)Intel® Core™ i7 Eight Core Processor i7-9700K (3.6GHz) 12MB Cache|ASUS® ROG STRIX Z390-F GAMING|32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB)|11GB NVIDIA GEFORCE RTX 2080TI|2TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE|1TB INTEL® 660p M.2 NVMe PCIe SSD (upto 1800MB/sR | 1800MB/sW)|CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET|Processor Cooling Corsair H60 Hydro Cooler w/ PCS Ultra Quiet Fans Thermal Paste||RIFT S VR| TM HOTAS A10 Warthog :joystick:

Link to post
Share on other sites

Tried to release the parking brake and the throttle does move Fwd and aft but the engine does not run up past 92 RPM. Just done a cold start in a free flight to test and had no issues at all, engine ran up past 92RPM. Could potentially be a bug on the campaign ? 

Rig: |(CPU)Intel® Core™ i7 Eight Core Processor i7-9700K (3.6GHz) 12MB Cache|ASUS® ROG STRIX Z390-F GAMING|32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB)|11GB NVIDIA GEFORCE RTX 2080TI|2TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE|1TB INTEL® 660p M.2 NVMe PCIe SSD (upto 1800MB/sR | 1800MB/sW)|CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET|Processor Cooling Corsair H60 Hydro Cooler w/ PCS Ultra Quiet Fans Thermal Paste||RIFT S VR| TM HOTAS A10 Warthog :joystick:

Link to post
Share on other sites

i dont believe a campaign can be bugged in not letting you cold start the jet.

 

maybe you just forgot to activate the fuel shutoff lever or the jet was on 0lbs of fuel?

Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...