Jump to content

HP REVERB G2 SET UP


Recommended Posts

Hi guys, finally got my hands on a HP Reverb G2 VR and I am wondering if there are any good tutorials out there for setting it up with DCS. I am after some tips on how to have my settings like, resolution display and pixel density etc to improve FPS. Any help would be much appreciated.  

 

RIG. I7 9700K, RTX  2080TI, 32GB RAM 

Rig: |(CPU)Intel® Core™ i7 Eight Core Processor i7-9700K (3.6GHz) 12MB Cache|ASUS® ROG STRIX Z390-F GAMING|32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB)|11GB NVIDIA GEFORCE RTX 2080TI|2TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE|1TB INTEL® 660p M.2 NVMe PCIe SSD (upto 1800MB/sR | 1800MB/sW)|CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET|Processor Cooling Corsair H60 Hydro Cooler w/ PCS Ultra Quiet Fans Thermal Paste||RIFT S VR| TM HOTAS A10 Warthog :joystick:

Link to post
Share on other sites

Here's one from bignewy: 

 

 

Don't push too many pixels to it if you want a good framerate. Like recommended in other posts, like bignewy's, I'm running a pixel density of 1 and a steam VR SS around 50% (so it lines up close to the native res of the headset). Similar hardware to yours, i7-9770kf with 32GB and a 3090. Doesn't look as good as it could, but it's smooth and reprojection doesn't kick in.

 

Also, I'd recommend turning down system volume to 50% or so when you're first starting it up and using it. Then dial it up if needed. One of the speakers blew on mine and I think it's from me running default 100% system volume through it initially.

 

Then this VR-compatible version of reshade has helped sharpen things up and allows for tuning things like colors and contrast:

 


Edited by Monkwolf
  • Thanks 1
Link to post
Share on other sites

Thank you monk wolf, much appreciated!

  • Like 1

Rig: |(CPU)Intel® Core™ i7 Eight Core Processor i7-9700K (3.6GHz) 12MB Cache|ASUS® ROG STRIX Z390-F GAMING|32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB)|11GB NVIDIA GEFORCE RTX 2080TI|2TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE|1TB INTEL® 660p M.2 NVMe PCIe SSD (upto 1800MB/sR | 1800MB/sW)|CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET|Processor Cooling Corsair H60 Hydro Cooler w/ PCS Ultra Quiet Fans Thermal Paste||RIFT S VR| TM HOTAS A10 Warthog :joystick:

Link to post
Share on other sites

Speed of Heats guide is very useful and well worth a look. He's running a 3090 but the process is still valid for a 2080ti

 

 

10900K O/C 5.2GHz | Maximus Hero XII | EVGA 3090 FTW Ultra | 64GB DDR4 3600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Reverb G2

Link to post
Share on other sites

Thanks Zildac I’ll check it out ! 

  • Like 1

Rig: |(CPU)Intel® Core™ i7 Eight Core Processor i7-9700K (3.6GHz) 12MB Cache|ASUS® ROG STRIX Z390-F GAMING|32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB)|11GB NVIDIA GEFORCE RTX 2080TI|2TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE|1TB INTEL® 660p M.2 NVMe PCIe SSD (upto 1800MB/sR | 1800MB/sW)|CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET|Processor Cooling Corsair H60 Hydro Cooler w/ PCS Ultra Quiet Fans Thermal Paste||RIFT S VR| TM HOTAS A10 Warthog :joystick:

Link to post
Share on other sites

All good guides and advice already posted.

However, I thought I'd also throw this into the mix (some of which might already be covered by the links already provided above)

https://vr4dcs.com/2020/12/24/how-to-nail-reverb-setup/


Edited by Dodge

Regards,

Paul "Dodge / LondonLad"

 

SYSTEM SPECS: AMD Ryzen 7 5800x @ 4.8 Ghz (OC) , 64GB 3600MHz RAM, ASUS ROG Strix X570-F Gaming, NVIDIA RTX 3070 8GB GDDR6, IIYAMA 34" Curved GB3466WQSU Monitor, Thrustmaster Warthog (Joystick + Throttles), VKB Pedals (v4) + TM MFD w/CUBESIM (x2), HP Reverb G2 VR  Headset & Oculus Quest 2 VR HEadset

Group: DCAF

Link to post
Share on other sites

Nice one dodge! Thanks a lot 

Rig: |(CPU)Intel® Core™ i7 Eight Core Processor i7-9700K (3.6GHz) 12MB Cache|ASUS® ROG STRIX Z390-F GAMING|32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB)|11GB NVIDIA GEFORCE RTX 2080TI|2TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE|1TB INTEL® 660p M.2 NVMe PCIe SSD (upto 1800MB/sR | 1800MB/sW)|CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET|Processor Cooling Corsair H60 Hydro Cooler w/ PCS Ultra Quiet Fans Thermal Paste||RIFT S VR| TM HOTAS A10 Warthog :joystick:

Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...