Jump to content

Vaicom Pro will only activate the \ Comm menu...And other non-functions.


Recommended Posts

How did you train the words?
And VAICOM doesn't use the comms menu actually, but will show it unless you have selected to hide it in the VAICOM control panel preferences.
Cheers!

Sent from my MAR-LX1A using Tapatalk

Link to post
Share on other sites

Thanks, MAX;

 

I used the train voice feature of the VAICOM configuration panel, and at one point even went straight to MS Speech Recognition on the desktop.  What's happening is that the comms menu keeps flashing up all on its own, and also every time VA thinks it hears me say anything.

 

But it rarely recognizes anything, and when it does, it doesn't do anything...

Link to post
Share on other sites

What different commands have you tried?

If you try Inbound as a command what happens?

Try them without DCS running and see what the log file says

Another thought that occurs to me is how many keywords are in the VA profile (the pencil icon).

Have you pressed the Finish button on the Vaicom Config Editor tab to copy the keywords?

Sent from my SM-T835 using Tapatalk



Windows 10 Home ¦ Z370 AORUS Gaming K3 motherboard ¦ i5-8600K oc to 4.3GHz ¦ 48GB Corsair PC4 memory @ 3000MHz ¦ Samsung 960 EVO M.2 SSD for OS, Samsung 860 EVO 500GB SSD for DCS ¦ ASUS ROG GTX 2060 Super 8GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk2 and MCG ¦ Thrustmaster Warthog Throttle ¦ MFG Crosswinds ¦ Oculus Rift S

Link to post
Share on other sites

What you say about flashing menus makes me think that VAICOM isn't really connected to DCS. Does the module show up in the control panel when you're in the cockpit? CHECK THIS FIRST!!!

If yes, do what Horn says.
If no, we'll take it from there.

Also, do the MS Speech training at least trice!
For difficult words and expressions (names, airfields etc.) add them to the MS Speech dictionary with a voice recording.
Cheers!


Sent from my MAR-LX1A using Tapatalk

Link to post
Share on other sites

Thanks, Hornblower! and Max!

 

Nope, nothing showing in the control panel when I'm in cockpit.  I've set the custom path and fixed registry, but still no joy.

 

 

I've tried to train the words for "Union" and "kneeboard" and "Lincoln" about two dozen times each, both in VAICOM and in MS Speech.  Every one has had many confidence results in the 90s consistently, then as soon as I quit the trainer, VA no longer recognizes them.  Oh, and I've done the "Finish" procedure each time to completion.

Link to post
Share on other sites

Very well. It's not the recognition, VAICOM is not connected to DCS, that's why you don't see the module in the control panel, and have the flashing menu.
Try this.
Close DCS, and VA. Repair DCS, open VA again and try a Lua repair from the VAICOM control panel. VA will restart, then start DCS.
Hope this helps!



Sent from my MAR-LX1A using Tapatalk

Link to post
Share on other sites
7 hours ago, cdrkrotchetyusn said:
AAAAAAUUUUUUGHH!
 
I've gone through that procedure four times, and still, no joy.  The control panel does not show the module...

Please could you turn on Vaicom debug (I think you already have this enabled looking at the screen shots), restart VA and then post your Vaicom log file here. The logfile can be found in <your Voiceattack install directory>/apps/Vaicompro/logs

Also, are you using any other DCS add-ons such as Tacview or SRS?

Sent from my SM-T835 using Tapatalk
 


Edited by hornblower793
  • Like 1

Windows 10 Home ¦ Z370 AORUS Gaming K3 motherboard ¦ i5-8600K oc to 4.3GHz ¦ 48GB Corsair PC4 memory @ 3000MHz ¦ Samsung 960 EVO M.2 SSD for OS, Samsung 860 EVO 500GB SSD for DCS ¦ ASUS ROG GTX 2060 Super 8GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk2 and MCG ¦ Thrustmaster Warthog Throttle ¦ MFG Crosswinds ¦ Oculus Rift S

Link to post
Share on other sites
17 hours ago, cdrkrotchetyusn said:

What's happening is that the comms menu keeps flashing up all on its own, and also every time VA thinks it hears me say anything.

 

At least for the comms menu flashing, try deleting the Export.lua in your <User>\Saved Games\DCS\Scripts folder. It'll automatically get recreated when DCS starts up.

 

For the issue with Vaicom not recognizing anything, I'm at a loss. Looks like you've updated the keywords set? And it's showing "kneeboard" as recognized during training. Updating the keywords would've been my first guess (afaik, by default it won't include the kneeboard commands since that is an extension)... that must also mean that the Vaicom config window appears for you ok, since you have updated the keywords?

 

Stupid question, but did you confirm VoiceAttack \ Vaicom is set to use the mic you are expecting? In the VoiceAttack settings Audio tab? A couple of times I've had issues and it was from the system switching the mic on me to one several feet further away, where it'd still pick up my voice a bit, but not well.

 

The index out of bounds exception in the VA log you attached makes me wonder if a reinstall of VA + Vaicom might help. Are you installing / running it as administrator (through Windows, there's also a "Run as Admin" option in VA in System/Advanced tab)? Since it's picking up the 'TX5' type events though doesn't seem like this would be it.

 

Edit: Checking the troubleshooting section of the user manual, deleting the Export.lua, confirming the VA is running as administrator, disabling the NS430 module, and disabling any additional mods you might be running are the recommended actions.

 


Edited by Monkwolf
Link to post
Share on other sites
1 hour ago, cdrkrotchetyusn said:

Good Morning, Horn,

 

I do have Tacview and SRS.  Do they then actually interfere?  I don't really use them...

 

Regards,

Curveball #302

VFA-113 STINGERS

STING TV on YouTube

VAICOMPRO.log 1.61 kB · 2 downloads

Looking at the log file I think there is an issue with the path you have set for your OB install (I am guessing this is therefore the one you are running). You have set the path to point to F:\DCS World OpenBeta\bin - it should actually be pointing to the root folder for the install (F:\DCS World OpenBeta). Without DCS running, change this path in the Vaicom config (including fixing the registry) and then close down VA. Run a quick repair on your DCS OB installation (checking changed files only), rename the Export.lua in Z:\\DCS.openbeta\Scripts and then restart VA / Vaicom once the repair has completed. You should have a new Export.lua in the folder.

 

Before running DCS, try pushing / holding your PTT button and saying Inbound to check that it comes up as recognised in the log (see the attached for my log) - As @Monkwolfhas said, check that the correct microphone is being used as windows or software updates can sometimes change it around - every now and then mine changes from my headset mic to my VR headset mic....

 

image.png

If Inbound is recognised then start up DCS and load one of the instant action free flight missions for your plane (if not, then there are VA / Vaicom set-up issues we need to troubleshoot). As soon as you are in the cockpit open the Vaicom config screen and see if the airframe is now showing.

 

SRS and Tacview also place lines in the shared Export.lua and can be a bit picky about their lines either being first or last in the file. I don't run SRS but do have Tacview. My export.lua entries are as follows:

 

local vaicomlfs = require('lfs'); dofile(vaicomlfs.writedir()..[[Scripts\VAICOMPRO\VAICOMPRO.export.lua]])
local Tacviewlfs=require('lfs');dofile(Tacviewlfs.writedir()..'Scripts/TacviewGameExport.lua')

 

Windows 10 Home ¦ Z370 AORUS Gaming K3 motherboard ¦ i5-8600K oc to 4.3GHz ¦ 48GB Corsair PC4 memory @ 3000MHz ¦ Samsung 960 EVO M.2 SSD for OS, Samsung 860 EVO 500GB SSD for DCS ¦ ASUS ROG GTX 2060 Super 8GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk2 and MCG ¦ Thrustmaster Warthog Throttle ¦ MFG Crosswinds ¦ Oculus Rift S

Link to post
Share on other sites

Well spotted Hornblower!
Pointing to the bin directory 's gotta be it! @cdrkrotchetyusn

Rember to have VA turned off when you do the repair, and DCS off when you delete (make a backup), the export.lua, and start VA before DCS after.
Hope this will solve it for you!
Cheers!

Sent from my MAR-LX1A using Tapatalk

Link to post
Share on other sites
33 minutes ago, cdrkrotchetyusn said:

Finally back from my orthopedics appointment.  Gonna try this right now!

 

... got a cast on my left wrist/forearm.  Hope it doesn't interfere with my HOTAS!

Lucky you - good luck with the flying

Windows 10 Home ¦ Z370 AORUS Gaming K3 motherboard ¦ i5-8600K oc to 4.3GHz ¦ 48GB Corsair PC4 memory @ 3000MHz ¦ Samsung 960 EVO M.2 SSD for OS, Samsung 860 EVO 500GB SSD for DCS ¦ ASUS ROG GTX 2060 Super 8GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk2 and MCG ¦ Thrustmaster Warthog Throttle ¦ MFG Crosswinds ¦ Oculus Rift S

Link to post
Share on other sites

3:56:10.178 Done. 
3:56:10.178 Constructing message... 
3:56:10.174 Joystick : 'Transmit TX1 release'
3:56:08.327 TX1 | COMM1: ARC-210 AM 127.500 MHz: no tuned units.
3:56:07.972 Listening resumed
3:56:07.939 Joystick : 'Transmit TX1 press'
3:55:25.889 Listening suspended
3:55:25.863 TX5 | INTERCOM: [ Ground Crew ] ,  [ Salute ]   
3:55:25.863 Recipient for Crew set by call contents.
3:55:25.863 Have result, identified as command: Salute
3:55:25.862 Captured sentence: salute
3:55:25.858 Recognized : 'salute'
3:55:25.569 Done. 
3:55:25.569 Constructing message... 
3:55:25.565 Shortcut : 'Transmit TX5 release'
3:55:24.725 AOCS: Briefing readout stopped.
3:55:24.725 Chatter initialized. 
3:55:24.725 Resources added. 
3:55:24.724 Adding chatter resources.. Navy
3:55:24.724 Chatter theme set to Navy
3:55:24.723 Adding themepack collections
3:55:24.630 No new ATCs were found.
3:55:24.630 Scanning for new theater.
3:55:24.629 Nearest ATC: CVN-72 Abraham Lincoln.
3:55:24.629 Player Curveball entered module FA-18C Hornet, unit callsign Chevy21
3:55:24.629 Resetting selected units.
3:55:24.628 DCS mission | VFA113LINCvVAICOMPro
3:55:24.628 ------------------------------------------
3:55:24.279 Listening resumed
3:55:24.243 Shortcut : 'Transmit TX5 press'
3:55:18.567 Listening suspended
3:55:18.540 TX1 | COMM1: ARC-210: [ Ground Crew ] ,  [ Salute ]   
3:55:18.540 Recipient for Crew set by call contents.
3:55:18.540 Have result, identified as command: Salute
3:55:18.539 Captured sentence: salute
3:55:18.535 Recognized : 'salute'
3:55:18.312 Joystick : 'Transmit TX1 release'
3:55:17.063 TX1 | COMM1: ARC-210 AM 127.500 MHz: no tuned units.
3:55:16.720 Joystick : 'Transmit TX1 press'
3:55:14.317 Unrecognized : 'seven to'
3:55:13.580 Done. 
3:55:13.580 Constructing message... 
3:55:13.577 Joystick : 'Transmit TX1 release'
3:55:12.523 AOCS: Starting mission briefing readout.
3:55:12.523 Chatter initialized. 
3:55:12.522 Resources added. 
3:55:12.522 Adding chatter resources.. Navy
3:55:12.521 Chatter theme set to Navy
3:55:12.521 Adding themepack collections
3:55:12.431 No new ATCs were found.
3:55:12.431 Scanning for new theater.
3:55:12.430 Nearest ATC: CVN-72 Abraham Lincoln.
3:55:12.430 Player Curveball entered module FA-18C Hornet, unit callsign Chevy21
3:55:12.429 Resetting selected units.
3:55:12.429 DCS mission | VFA113LINCvVAICOMPro
3:55:12.428 ------------------------------------------
3:55:12.085 Listening resumed
3:55:12.054 Joystick : 'Transmit TX1 press'
3:55:07.447 Listening suspended
3:55:07.416 TX5 | INTERCOM: [ Ground Crew ] ,  [ Salute ]   
3:55:07.416 Recipient for Crew set by call contents.
3:55:07.415 Have result, identified as command: Salute
3:55:07.414 Captured sentence: salute
3:55:07.411 Recognized : 'salute'
3:55:07.073 Done. 
3:55:07.073 Constructing message... 
3:55:07.069 Shortcut : 'Transmit TX5 release'
3:55:05.507 Listening resumed
3:55:05.469 Shortcut : 'Transmit TX5 press'
3:55:00.628 Listening suspended
3:55:00.601 TX5 | INTERCOM: [ Ground Crew ] ,  [ Salute ]   
3:55:00.601 Recipient for Crew set by call contents.
3:55:00.600 Have result, identified as command: Salute
3:55:00.600 Captured sentence: salute
3:55:00.596 Recognized : 'salute'
3:54:59.997 Done. 
3:54:59.996 Constructing message... 
3:54:59.990 Shortcut : 'Transmit TX5 release'
3:54:58.894 AOCS: Briefing readout stopped.
3:54:58.894 Chatter initialized. 
3:54:58.893 Resources added. 
3:54:58.893 Adding chatter resources.. Navy
3:54:58.892 Chatter theme set to Navy
3:54:58.892 Adding themepack collections
 

 

Ahh!

PTT Window now shows my module, so we're making progress.  Still can't get anyone to respond.  Couldn't launch off the carrier, even though VAICOM recognized "salute" and seemed to log the appropriate response.  But no launchy-launchy...

  • Like 1
Link to post
Share on other sites
3:56:10.178 Done. 
3:56:10.178 Constructing message... 
3:56:10.174 Joystick : 'Transmit TX1 release'
3:56:08.327 TX1 | COMM1: ARC-210 AM 127.500 MHz: no tuned units.
3:56:07.972 Listening resumed
3:56:07.939 Joystick : 'Transmit TX1 press'
3:55:25.889 Listening suspended
3:55:25.863 TX5 | INTERCOM: [ Ground Crew ] ,  [ Salute ]   
3:55:25.863 Recipient for Crew set by call contents.
3:55:25.863 Have result, identified as command: Salute
3:55:25.862 Captured sentence: salute
3:55:25.858 Recognized : 'salute'
3:55:25.569 Done. 
3:55:25.569 Constructing message... 
3:55:25.565 Shortcut : 'Transmit TX5 release'
3:55:24.725 AOCS: Briefing readout stopped.
3:55:24.725 Chatter initialized. 
3:55:24.725 Resources added. 
3:55:24.724 Adding chatter resources.. Navy
3:55:24.724 Chatter theme set to Navy
3:55:24.723 Adding themepack collections
3:55:24.630 No new ATCs were found.
3:55:24.630 Scanning for new theater.
3:55:24.629 Nearest ATC: CVN-72 Abraham Lincoln.
3:55:24.629 Player Curveball entered module FA-18C Hornet, unit callsign Chevy21
3:55:24.629 Resetting selected units.
3:55:24.628 DCS mission | VFA113LINCvVAICOMPro
3:55:24.628 ------------------------------------------
3:55:24.279 Listening resumed
3:55:24.243 Shortcut : 'Transmit TX5 press'
3:55:18.567 Listening suspended
3:55:18.540 TX1 | COMM1: ARC-210: [ Ground Crew ] ,  [ Salute ]   
3:55:18.540 Recipient for Crew set by call contents.
3:55:18.540 Have result, identified as command: Salute
3:55:18.539 Captured sentence: salute
3:55:18.535 Recognized : 'salute'
3:55:18.312 Joystick : 'Transmit TX1 release'
3:55:17.063 TX1 | COMM1: ARC-210 AM 127.500 MHz: no tuned units.
3:55:16.720 Joystick : 'Transmit TX1 press'
3:55:14.317 Unrecognized : 'seven to'
3:55:13.580 Done. 
3:55:13.580 Constructing message... 
3:55:13.577 Joystick : 'Transmit TX1 release'
3:55:12.523 AOCS: Starting mission briefing readout.
3:55:12.523 Chatter initialized. 
3:55:12.522 Resources added. 
3:55:12.522 Adding chatter resources.. Navy
3:55:12.521 Chatter theme set to Navy
3:55:12.521 Adding themepack collections
3:55:12.431 No new ATCs were found.
3:55:12.431 Scanning for new theater.
3:55:12.430 Nearest ATC: CVN-72 Abraham Lincoln.
3:55:12.430 Player Curveball entered module FA-18C Hornet, unit callsign Chevy21
3:55:12.429 Resetting selected units.
3:55:12.429 DCS mission | VFA113LINCvVAICOMPro
3:55:12.428 ------------------------------------------
3:55:12.085 Listening resumed
3:55:12.054 Joystick : 'Transmit TX1 press'
3:55:07.447 Listening suspended
3:55:07.416 TX5 | INTERCOM: [ Ground Crew ] ,  [ Salute ]   
3:55:07.416 Recipient for Crew set by call contents.
3:55:07.415 Have result, identified as command: Salute
3:55:07.414 Captured sentence: salute
3:55:07.411 Recognized : 'salute'
3:55:07.073 Done. 
3:55:07.073 Constructing message... 
3:55:07.069 Shortcut : 'Transmit TX5 release'
3:55:05.507 Listening resumed
3:55:05.469 Shortcut : 'Transmit TX5 press'
3:55:00.628 Listening suspended
3:55:00.601 TX5 | INTERCOM: [ Ground Crew ] ,  [ Salute ]   
3:55:00.601 Recipient for Crew set by call contents.
3:55:00.600 Have result, identified as command: Salute
3:55:00.600 Captured sentence: salute
3:55:00.596 Recognized : 'salute'
3:54:59.997 Done. 
3:54:59.996 Constructing message... 
3:54:59.990 Shortcut : 'Transmit TX5 release'
3:54:58.894 AOCS: Briefing readout stopped.
3:54:58.894 Chatter initialized. 
3:54:58.893 Resources added. 
3:54:58.893 Adding chatter resources.. Navy
3:54:58.892 Chatter theme set to Navy
3:54:58.892 Adding themepack collections
 
 
Ahh!
PTT Window now shows my module, so we're making progress.  Still can't get anyone to respond.  Couldn't launch off the carrier, even though VAICOM recognized "salute" and seemed to log the appropriate response.  But no launchy-launchy...
Which plane are you in, and are you hooked up on the bar with afterburners fired up?

Sent from my SM-T835 using Tapatalk


Windows 10 Home ¦ Z370 AORUS Gaming K3 motherboard ¦ i5-8600K oc to 4.3GHz ¦ 48GB Corsair PC4 memory @ 3000MHz ¦ Samsung 960 EVO M.2 SSD for OS, Samsung 860 EVO 500GB SSD for DCS ¦ ASUS ROG GTX 2060 Super 8GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk2 and MCG ¦ Thrustmaster Warthog Throttle ¦ MFG Crosswinds ¦ Oculus Rift S

Link to post
Share on other sites
Hornet, hooked up, AB burning, shooter finished with controls wipeout, giving run-up signal, waiting for salute.
unfortunately, I could never give him one...
I'm gonna try another repair/LUA reset.
 
I don't think you need to do that - what frequency is the CV tuned to? The log file shows no tuned units on the frequency you are using.

I am rusty in the F-18 but will hop into mine tomorrow for a launch and see what happens. Try using TX1 rather than TX5

Sent from my SM-T835 using Tapatalk


  • Like 1

Windows 10 Home ¦ Z370 AORUS Gaming K3 motherboard ¦ i5-8600K oc to 4.3GHz ¦ 48GB Corsair PC4 memory @ 3000MHz ¦ Samsung 960 EVO M.2 SSD for OS, Samsung 860 EVO 500GB SSD for DCS ¦ ASUS ROG GTX 2060 Super 8GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk2 and MCG ¦ Thrustmaster Warthog Throttle ¦ MFG Crosswinds ¦ Oculus Rift S

Link to post
Share on other sites

TX5 Intercom is not connected to the carrier crew I suppose. Or does the Hornet even have one? Check in your VAICOM control panel where is shoes you the module, and it will show you what comms the aircraft has.

Per Hornblower's suggestion, use TX1 or TX2.
You're nearly there!
Cheers!

Sent from my MAR-LX1A using Tapatalk

Link to post
Share on other sites

5:56:51.823 Unrecognized : 'to the good that'
5:56:48.779 Unrecognized : 'and the board's'
5:56:43.082 Unrecognized : 'for kneeboard'
5:56:40.965 Unrecognized : 'kneeboard'
5:56:30.274 Unrecognized : 'kneeboard'
5:56:12.447 Unrecognized : 'you if there and I'
5:56:00.612 File export success.
5:56:00.609 Exported aliases to keywords.txt, keyword count = 941
5:55:57.822 Listening resumed
5:55:57.774 ----------------------------------
5:55:57.774 Keyword training finished.
5:55:50.035 File export success.
5:55:50.032 Exported aliases to keywords.txt, keyword count = 941
5:55:45.630 Command phrase 'Kneeboard' is already in use!
5:55:40.460 Command phrase 'Kneeboard' is already in use!
5:55:39.208 Keyword recognized: kneeboard with confidence 94 %
5:55:35.459 Keyword recognized: Tanker with confidence 81 %
5:55:32.961 Keyword recognized: kneeboard with confidence 94 %
5:55:30.832 Keyword recognized: kneeboard with confidence 94 %
5:55:28.643 Keyword recognized: kneeboard with confidence 94 %
5:55:26.396 Keyword recognized: kneeboard with confidence 93 %
5:55:24.079 Keyword recognized: kneeboard with confidence 94 %
5:55:21.578 Keyword recognized: kneeboard with confidence 94 %
5:55:18.580 Keyword recognized: kneeboard with confidence 95 %
5:55:14.391 Keyword recognized: kneeboard with confidence 94 %
5:55:10.423 Ready for training.
5:55:10.422 Offline keyword training initialized
5:55:10.396 VAICOM PRO command phrases loaded
5:55:10.394 Listening suspended
5:55:10.321 Microsoft Speech Recognizer 8.0 for Windows (English - US)
5:55:10.314 Initializing Training Mode
5:55:10.313 ----------------------------------
5:55:06.407 Success.
5:55:06.407 Building master labels table...
5:55:06.406 Success.
5:55:06.399 Building kneeboard tables...
5:55:06.398 Success.
5:55:06.394 Building master keywords table...
5:55:06.394 Adding 4 imported ATC aliases.
5:55:06.394 Success.
5:55:06.383 Loading keywords database...
5:54:57.418 Listening resumed
5:54:57.366 ----------------------------------
5:54:57.366 Keyword training finished.
5:53:28.149 Ready for training.
5:53:28.148 Offline keyword training initialized
5:53:28.141 VAICOM PRO command phrases loaded
5:53:28.141 Listening suspended
5:53:28.058 Microsoft Speech Recognizer 8.0 for Windows (English - US)
5:53:27.641 Initializing Training Mode
5:53:27.641 ----------------------------------
5:52:18.967 Unrecognized : 'S87 and is a questionnaire'
5:52:09.660 Unrecognized : 'none the done hundred games should like'
5:51:59.693 Unrecognized : 'give these were home or will have a high-where-are by the'
5:51:38.051 Unrecognized : 'kneeboard from'
5:51:34.622 Unrecognized : 'kneeboard'
5:51:31.682 Unrecognized : 'gray kneeboard'
5:51:29.740 Unrecognized : 'kneeboard of'
5:51:24.315 Unrecognized : 'if kneeboard'
5:50:58.031 Shortcut : 'Transmit TX5 release'
5:50:56.736 AOCS: Starting mission briefing readout.
5:50:56.736 Chatter initialized. 
5:50:56.736 Resources added. 
5:50:56.735 Adding chatter resources.. Navy
5:50:56.735 Chatter theme set to Navy
5:50:56.734 Adding themepack collections
5:50:56.638 No new ATCs were found.
5:50:56.638 Scanning for new theater.
5:50:56.637 Nearest ATC: CVN-72 Abraham Lincoln.
5:50:56.637 Player Curveball entered module FA-18C Hornet, unit callsign Chevy21
5:50:56.637 Resetting selected units.
5:50:56.636 DCS mission | VFA113LINCvVAICOMPro
5:50:56.636 ------------------------------------------
5:50:56.285 Shortcut : 'Transmit TX5 press'
5:50:54.672 Unrecognized : 'if fifth'
5:50:02.546 Success.
5:50:02.545 Building master labels table...
5:50:02.545 Success.
5:50:02.538 Building kneeboard tables...
5:50:02.535 Success.
5:50:02.531 Building master keywords table...
5:50:02.531 Adding 4 imported ATC aliases.
5:50:02.531 Success.
5:50:02.472 Loading keywords database...
5:50:02.378 Opening Configuration window
5:50:02.373 Shortcut : 'Configuration'
5:49:46.915 Unrecognized : 'kneeboard'
5:49:44.727 Unrecognized : 'kneeboard'
5:49:42.855 Unrecognized : 'kneeboard'
5:49:35.979 Unrecognized : 'kneeboard'
5:49:28.035 Unrecognized : 'kneeboard'
5:49:25.847 Unrecognized : 'kneeboard'
5:49:22.475 Unrecognized : 'kneeboard'
5:49:17.599 Unrecognized : 'kneeboard'
5:49:16.849 Done. 
5:49:16.848 Constructing message... 
5:49:16.844 Shortcut : 'Transmit TX5 release'
5:49:15.776 AOCS: Briefing readout stopped.
5:49:15.776 Chatter initialized. 
 

 

 

Arrgh!  Getting closer, but still can't get it to recognize "kneeboard" in VAICOM, no matter how many times I've done the VAICOM voice recognition / MS Speech Recognition.  It claims success all the way through the finish and the database update, but then "Unrecognized: 'kneeboard'...

Also, made sure I'm using the proper freqs, which I hadn't!

Trying that now

 

Link to post
Share on other sites

You're still using TX5. Why?


Sent from my MAR-LX1A using Tapatalk

And actually, MS/VA is recognising "kneeboard" fine. Or it would display another word.

Sent from my MAR-LX1A using Tapatalk

Link to post
Share on other sites

Salute finally worked, and it seems that I'm on the right Carrier freq, but she doesn't respond...

I tried it several times while the carrier was in a turn and I was in full AB, so I don't know if it recognized just the plain voice command, or the TX5 PTT, but I finally got launched after the carrier steadied up.

 

However, no joy on Mother...

 

7:03:26.414 AOCS: Starting mission briefing readout.
7:03:26.413 Chatter initialized. 
7:03:26.413 Resources added. 
7:03:26.413 Adding chatter resources.. Navy
7:03:26.412 Chatter theme set to Navy
7:03:26.412 Adding themepack collections
7:03:26.316 Listening resumed
7:03:26.245 No new ATCs were found.
7:03:26.244 Scanning for new theater.
7:03:26.244 Nearest ATC: CVN-72 Abraham Lincoln.
7:03:26.243 Player Curveball entered module FA-18C Hornet, unit callsign Chevy21
7:03:26.243 Resetting selected units.
7:03:26.242 DCS mission | VFA113LINCvVAICOMPro
7:03:26.242 ------------------------------------------
7:02:28.483 Listening suspended
7:02:28.435 TX1 | COMM1: ARC-210: [ Air Traffic Controller ] ,  [ Inbound ]   
7:02:28.435 Recipient for ATC set by call contents.
7:02:28.435 Identified unit: Abraham Lincoln with id 16777472
7:02:28.434 Getting selected unit for category ATC
7:02:28.434 Have result, identified as command: Inbound
7:02:28.433 Captured sentence: inbound
7:02:28.429 Recognized : 'inbound'
7:02:27.852 Done. 
7:02:27.847 Constructing message... 
7:02:27.843 Joystick : 'Transmit TX1 release'
7:02:26.757 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.757 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.756 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.756 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.756 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.755 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.755 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.755 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.754 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.754 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.754 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.753 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.753 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.753 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.752 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.752 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.752 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.751 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.751 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.751 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.750 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.750 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.750 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.749 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.749 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.749 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.748 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.748 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.748 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.747 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.747 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.747 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.746 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.746 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.746 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.745 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.745 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.745 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.744 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.744 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.743 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:26.501 Listening resumed
7:02:26.449 Joystick : 'Transmit TX1 press'
7:02:17.916 Listening suspended
7:02:17.875 TX1 | COMM1: ARC-210: [ Air Traffic Controller ] ,  [ Inbound ]   
7:02:17.875 Recipient for ATC set by call contents.
7:02:17.874 Identified unit: Abraham Lincoln with id 16777472
7:02:17.874 Getting selected unit for category ATC
7:02:17.874 Have result, identified as command: Inbound
7:02:17.873 Captured sentence: inbound
7:02:17.869 Recognized : 'inbound'
7:02:17.356 Joystick : 'Transmit TX1 release'
7:02:15.783 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.782 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.782 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.782 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.781 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.781 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.781 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.780 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.780 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.780 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.780 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.779 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.779 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.779 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.778 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.778 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.778 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.777 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.777 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.777 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.776 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
7:02:15.776 TX1 | COMM1: ARC-210 AM 127.500 MHz tuned for Supercarrier unit Abraham Lincoln [AI]
 

7:11:56.882 Listening suspended
7:11:56.784 TX5 | INTERCOM: [ Ground Crew ] ,  [ Wheelchocks Place ]   
7:11:56.784 Recipient for Crew set by call contents.
7:11:56.783 Have result, identified as command: Place the Wheelchocks
7:11:56.783 Have result, identified as recipient: Chief
7:11:56.782 Captured sentence: chief place the wheelchocks
7:11:56.778 Recognized : 'chief place the wheelchocks'
7:11:56.414 Done. 
7:11:56.413 Constructing message... 
7:11:56.409 Shortcut : 'Transmit TX5 release'
7:11:54.032 Listening resumed
7:11:54.001 Shortcut : 'Transmit TX5 press'
7:11:31.524 Listening suspended
7:11:31.408 TX5 | INTERCOM: [ Ground Crew ] ,  [ Wheelchocks Place ]   
7:11:31.408 Recipient for Crew set by call contents.
7:11:31.407 Have result, identified as command: Place the Wheelchocks
7:11:31.407 Have result, identified as recipient: Chief
7:11:31.406 Captured sentence: chief place the wheelchocks
7:11:31.402 Recognized : 'chief place the wheelchocks'
7:11:31.140 Done. 
7:11:31.140 Constructing message... 
7:11:31.136 Shortcut : 'Transmit TX5 release'
7:11:28.989 AOCS: Briefing readout stopped.
7:11:28.989 Chatter initialized. 
7:11:28.988 Resources added. 
7:11:28.988 Adding chatter resources.. Navy
7:11:28.988 Chatter theme set to Navy
7:11:28.987 Adding themepack collections
7:11:28.894 No new ATCs were found.
7:11:28.894 Scanning for new theater.
7:11:28.893 Nearest ATC: CVN-72 Abraham Lincoln.
7:11:28.893 Player Curveball entered module FA-18C Hornet, unit callsign Chevy21
7:11:28.893 Resetting selected units.
7:11:28.892 DCS mission | VFA113LINCvVAICOMPro
 

 

How do I get the Chief to place the wheelchocks?

Link to post
Share on other sites

7:16:02.516 Unrecognized : 'kneeboard'
7:15:59.959 Unrecognized : 'kneeboard'
7:15:57.579 Unrecognized : 'kneeboard'
7:15:52.266 Unrecognized : 'kneeboard'
7:15:43.398 Done. 
7:15:43.398 Constructing message... 
7:15:43.394 Shortcut : 'Transmit TX5 release'
7:15:42.931 AOCS: Starting mission briefing readout.
7:15:42.930 Chatter initialized. 
7:15:42.930 Resources added. 
7:15:42.929 Adding chatter resources.. Navy
7:15:42.929 Chatter theme set to Navy
7:15:42.929 Adding themepack collections
7:15:42.835 No new ATCs were found.
7:15:42.834 Scanning for new theater.
7:15:42.834 Nearest ATC: CVN-72 Abraham Lincoln.
7:15:42.833 Player Curveball entered module FA-18C Hornet, unit callsign Chevy21
7:15:42.833 Resetting selected units.
7:15:42.833 DCS mission | VFA113LINCvVAICOMPro
 

Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...