Jump to content

Caucasus map major BUG


Recommended Posts

Theres a serious bug in Caucasus map. I observe these bug on Airfields:

Krymsk

Anapa (reversed by 180°)

Maykop

 

but there may be others

 

 If NAV wind BLOWS between 300° and 60° 1 - 4m/s active runway is 22 (on Krymsk and Maykop) lights (for night landings and bad weather landings) are set for direction 22, but....

 

... ARK beascon (NDB Beacon) is set for approach on 04

.... RSBN &  PRMG beacon are set for approach on 04

 

Can you please correct it? We're flying L39C. It's Virtual flying school with proper communication, procedures, and true - life military pilot who's acting instructor. The planes are virtual, but the basic knowledge stays the same. There are exams, lessons etc., meteorology, VFR flights, IFR flights and air traffic control. These bug is a serious problem for us, since we can't alter active runway or active beacons. 

Second problem is, when we're conducting basic night flights. After landing and taxiing to take off again Airstrip lights (APS) doesn't allways come on as they should.

 

The other problem is a serious de-synchronization between first and second cockpit in L39. 

 

While emergency situations failures appear in one cockpit only, there are situations when in first cockpit engine works and in second doesn't. Plane refueled from first cockpit isn't refueled for pilot in second cockpit. That's why when you take off right after refuel, instructor in second cockpit hears engine shutting down because in his cockpit fuel is at 0 level, In the same time for pilot in front cockpit everything is fine (engine works). For instructor in second cockpit engine is shut down. 

 

It would be also nice if someone finally adds missing texture in L39 Cockpit. It's visible when you turn your head 160° to the right. There's a cable without texture.

 

Can you please help?

 

With my best regards 

303_Kermit

  • Like 3
Link to post
Share on other sites

i believe the ILS/beacon bug happens for winds up to 6 m/s. iirc it happens to some airfields in nevada and persian gulf too (al dhafra?).

 

it is a widely recommended mission making tip to set wind to either 0 or 6+ m/s for this reason.


Edited by dorianR666

CPU: AMD Ryzen 5 1600X

GPU: AMD RX 580

Link to post
Share on other sites
On 3/29/2021 at 4:53 PM, 303_Kermit said:

...If NAV wind BLOWS between 300° and 60° 1 - 4m/s active runway is 22 (on Krymsk and Maykop) lights (for night landings and bad weather landings) are set for direction 22, but....

 

... ARK beascon (NDB Beacon) is set for approach on 04

.... RSBN &  PRMG beacon are set for approach on 04...

 

Technically speaking, you are asking for a feature change, not reporting a bug. There are only 6 runways in the Caucasus (and none on the other maps AFAIK) with native support for RSBN, PRMG, etc. They are Mozdok 08/26, Maykop 04, Krasnodar Center 09, and Krymsk 04/22. If you look at the map, their channel info, etc are marked in blue. Or is your issue something other than this?


Edited by Ironhand

YouTube Channel: https://www.youtube.com/channel/UCU1...CR6IZ7crfdZxDg

 

_____

Win 10 Pro x64, ASUS Z97 Pro MoBo, Intel i7-4790K, EVGA GTX 970 4GB, HyperX Savage 16GB, Samsung 850 EVO 250 GB SSD, 2x Seagate Hybrid Drive 2TB Raid 0.

Link to post
Share on other sites
On 4/7/2021 at 1:11 PM, Ironhand said:

 

Technically speaking, you are asking for a feature change, not reporting a bug. There are only 6 runways in the Caucasus (and none on the other maps AFAIK) with native support for RSBN, PRMG, etc. They are Mozdok 08/26, Maykop 04, Krasnodar Center 09, and Krymsk 04/22. If you look at the map, their channel info, etc are marked in blue. Or is your issue something other than this?

 

Nope, I'm affraid I wasn't properly understand. I prepare a Track right now!

Link to post
Share on other sites
Posted (edited)

 

On 4/6/2021 at 11:48 AM, BIGNEWY said:

please include a track replay showing an example, thank you

Hallo Sir!

Thank you for response. I prepared a film to explain as clearly as I could what I meant. I also uploaded a test.mis file where bug can be observed. I stay at your disposal.

A link to a film on YT where I try to explain a problem:
https://youtu.be/b-hO_xmiOlE

 

A link to a test.mis

test.miz

 

 

With my best regards
303_Kermit


Edited by 303_Kermit
Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...