GPatricks Posted January 8, 2021 Share Posted January 8, 2021 If there is a spot to easily find this info, please excuse the post. I have my CH HOTAS set up the same way I use it in the "other" F-16 sim, but the keys I can't seem to find are to change the radar elevation (LMFD). Range is OSB 19-20, works fine, just can't find the elv. keys. I use YAME64 to extract MFDs and gauges to my two Lilliput 8" monitors. Is there a similar "easy to use" program for DCS? Thanks for any help, looking forward to getting into this and also the F-18 module. Read that ATC and dynamic campaign are not far off, great news! Asus Z790-PLUS D4, Corsair 1000X PS / Intel i9-13900KF @5.8Gz - Corsair H150i Liquid CPU cooler, 64GB Corsair Vengeance DDR4 @3192mhz / 2TB M.2 NvMe Boot Drive (DCS World Beta installed here), 1TB M.2 Data drive, 1TB WD SATA drive, Zotac Gaming GeForce RTX 4090 Trinity 24GB - Nvidia 552.12 driver / 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz / Win11 Pro Ver. 23H2 - Build 22631.3447 TIR 5, TM Warthog HOTAS\VirPil stick base, MFG V3 Crosswind Pedals, TM MFDs on 2 8" Lilliputs/ Simgears ICP / Varjo Aero VR Link to comment Share on other sites More sharing options...
Raptor05121 Posted January 8, 2021 Share Posted January 8, 2021 Elevation is under ANTELEV under axis commands -Alex i9-12900K | RTX3080 | 32GB DDR4 | Water Cooled | Logitech X56 | TrackIR5 | 34" MSI Curved Widescreen 3440x1440 Link to comment Share on other sites More sharing options...
Y-Man Posted January 8, 2021 Share Posted January 8, 2021 Display extraction is handled through DCS. No external program needed. It's done through LUA files. I had messed with it a small bit, but moved to VR and extraction was no longer needed. AMD 5800X, Gigabyte Aorus X570 Ultra, 64GB G. Skill Ripjaws@3200, CoolerMaster ML360 AIO, Samsung 970 Evo 1TB, Samsung 960 Evo 250GB, Samsung 850 Evo 1TB, Sandisk 960GB, WD 2TB Black HDD, Asus GTX 1080FE, CoolerMaster C700M Case, Logitech G815 Kb, Logitech G903 Mouse, G13 Gamepad, Z906 500w 5.1 surround speakers, Track IR /w Trackclip pro, TM Cougar MFDS, Warthog Stick on Virpil Warbird Base/Throttle, MFG Crosswinds, 3 x AOC 27" curved 1440p monitors @ 7680 x 1440 resolution, HP Reverb G2 Link to comment Share on other sites More sharing options...
Bunny Clark Posted January 8, 2021 Share Posted January 8, 2021 You have two options for the radar antenna elevation controls: You can bind the axis: ANT ENEV Knob. You can bind buttons: ANT ELEV Knob - CCW, and ANT ELEV Knob - CW Oil In The Water Hornet Campaign. Bunny's: Form-Fillable Controller Layout PDFs | HOTAS Kneeboards | Checklist Kneeboards Link to comment Share on other sites More sharing options...
GPatricks Posted January 9, 2021 Author Share Posted January 9, 2021 12 hours ago, Bunny Clark said: You have two options for the radar antenna elevation controls: You can bind the axis: ANT ENEV Knob. You can bind buttons: ANT ELEV Knob - CCW, and ANT ELEV Knob - CW Thanks Bunny, I am using a 4-way hat on my CH throttle. I swear I tried using the CW/CCW bindings but i'll take another look. I'll also do some study today on using the LUA files and Helios, if applicable. Thanks guys! Asus Z790-PLUS D4, Corsair 1000X PS / Intel i9-13900KF @5.8Gz - Corsair H150i Liquid CPU cooler, 64GB Corsair Vengeance DDR4 @3192mhz / 2TB M.2 NvMe Boot Drive (DCS World Beta installed here), 1TB M.2 Data drive, 1TB WD SATA drive, Zotac Gaming GeForce RTX 4090 Trinity 24GB - Nvidia 552.12 driver / 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz / Win11 Pro Ver. 23H2 - Build 22631.3447 TIR 5, TM Warthog HOTAS\VirPil stick base, MFG V3 Crosswind Pedals, TM MFDs on 2 8" Lilliputs/ Simgears ICP / Varjo Aero VR Link to comment Share on other sites More sharing options...
Sacarino111 Posted January 9, 2021 Share Posted January 9, 2021 1 hour ago, GaryR said: Thanks Bunny, I am using a 4-way hat on my CH throttle. I swear I tried using the CW/CCW bindings but i'll take another look. I'll also do some study today on using the LUA files and Helios, if applicable. Thanks guys! Hi. Be sure no axis is also bound to the Range 'cause it would make the buttons useless! Saca111 1 Link to comment Share on other sites More sharing options...
GPatricks Posted January 9, 2021 Author Share Posted January 9, 2021 4 hours ago, Sacarino111 said: Hi. Be sure no axis is also bound to the Range 'cause it would make the buttons useless! Saca111 All set now, the Save Profile was missed after my last change I guess.. now I just need to get Helios to work with my two MFD monitors... Asus Z790-PLUS D4, Corsair 1000X PS / Intel i9-13900KF @5.8Gz - Corsair H150i Liquid CPU cooler, 64GB Corsair Vengeance DDR4 @3192mhz / 2TB M.2 NvMe Boot Drive (DCS World Beta installed here), 1TB M.2 Data drive, 1TB WD SATA drive, Zotac Gaming GeForce RTX 4090 Trinity 24GB - Nvidia 552.12 driver / 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz / Win11 Pro Ver. 23H2 - Build 22631.3447 TIR 5, TM Warthog HOTAS\VirPil stick base, MFG V3 Crosswind Pedals, TM MFDs on 2 8" Lilliputs/ Simgears ICP / Varjo Aero VR Link to comment Share on other sites More sharing options...
Sacarino111 Posted January 10, 2021 Share Posted January 10, 2021 18 hours ago, GaryR said: All set now, the Save Profile was missed after my last change I guess.. now I just need to get Helios to work with my two MFD monitors... I should give that Helios a try... Link to comment Share on other sites More sharing options...
Recommended Posts