Gavvinwarder Posted January 5 Share Posted January 5 I am having a problem with trim in the a10. Was wondering what trim to nose is. No on seems to know, it is bound on my hotas from the dcs profile. Any help would be great. Link to post Share on other sites
Foka Posted January 5 Share Posted January 5 But what is your problem? You didn't say that. Trimming works fine. Link to post Share on other sites
Ziptie Posted January 5 Share Posted January 5 (edited) 5 hours ago, Gavvinwarder said: I am having a problem with trim in the a10. Was wondering what trim to nose is. No on seems to know, it is bound on my hotas from the dcs profile. Any help would be great. The TRIM hat binds should be located in the HOTAS (or stick) sub category of the A10CII controls menu. They are the standard four bindings: NOSE UP, NOSE DOWN, RWD, LWD. Depending on what physical HOTAS you are using, it is possible to accidentally bind one of the aforementioned commands incorrectly (i.e binding NOSE DOWN to one of the 8 way hat positions on the TMWH rather than the 12 o'clock, or forward position). If you are having troubles with trimming the aircraft out, and have verified that they are indeed bound properly - ensure that you do not have "game mode" checked as I believe GAME MODE doesn't allow for proper trimming of aircraft. The above are a few "shots in the dark" as you didn't really clarify the problem you are having - just a generalized statement (that was fairly vague). Cheers, Ziptie Edited January 5 by Ziptie i7 6700 @4ghz, 32GB HyperX Fury ddr4-2133 ram, GTX980, Oculus Rift CV1, 2x400 gig SSD drives (one soley for DCS OpenBeta standalone) Thrustmaster Warthog HOTAS, Thrustmaster Cougar MFDs Airframes: A10C, A10CII, F/A-18C, F-14B, F-16C, FC3. Modules: Combined Arms, Supercarrier. Terrains: Persian Gulf, Nevada NTTR, Syria Link to post Share on other sites
mongo52 Posted January 6 Share Posted January 6 Also check to make sure force feedback is not enabled if your problem is trimming the aircraft Link to post Share on other sites
LeCuvier Posted January 6 Share Posted January 6 I had a feeling that the question was more basic, like "what is Nose down trim for?". I might be wrong of course, no offence intended. Gavvinwarder should probably rephrase the question to be more explicit. LeCuvier Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5 Link to post Share on other sites
thrustvector Posted January 6 Share Posted January 6 i guess your just asking what trim to nose is?. basically does what it says Link to post Share on other sites
Ziptie Posted January 6 Share Posted January 6 On 1/5/2021 at 5:43 AM, Gavvinwarder said: I am having a problem with trim in the a10. Was wondering what trim to nose is. No on seems to know, it is bound on my hotas from the dcs profile. Any help would be great. Nose trim down (when pushed) "drops the nose" - Nose trim down. Nose trim up (when pushed) "lifts the nose" - Nose trim up. The trim switch on the A10C works like most other aircraft with a trim switch. Cheers, Ziptie i7 6700 @4ghz, 32GB HyperX Fury ddr4-2133 ram, GTX980, Oculus Rift CV1, 2x400 gig SSD drives (one soley for DCS OpenBeta standalone) Thrustmaster Warthog HOTAS, Thrustmaster Cougar MFDs Airframes: A10C, A10CII, F/A-18C, F-14B, F-16C, FC3. Modules: Combined Arms, Supercarrier. Terrains: Persian Gulf, Nevada NTTR, Syria Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now