zoranin73 Posted November 18, 2020 Share Posted November 18, 2020 I try everything but I can t get signal on arc-ud,watched all tutorial which I can find but nothing seems to work for me.On arc-ud panel I put on narrow,put preset chanell on r 828 radio,tune station and nothing,try hundred times?? Link to comment Share on other sites More sharing options...
TwinkieAvenger Posted November 19, 2020 Share Posted November 19, 2020 I haven't tried this myself but the manual says on pg 117: To use the R-828 radio in conjunction with the ARK-UD homing set to home on to a ground station, first establish voice contact with the station and request a tone modulated signal from the ground station operator for the desired frequency. Once the tone signal is confirmed in the headset, set the Р-828 СВЯЗЬ-КОМПАС" (R-828 VOICE-HOMING) mode switch to "КОМПАС" (HOMING). Observe the needle on the UGR-4UK directional gyro for signal bearing. Perhaps you need to use the radio communications menu with the R-828 tuned and in "VOICE/СВЯЗЬ" mode to request enabling the homing beacon first? Link to comment Share on other sites More sharing options...
Looney Posted November 21, 2020 Share Posted November 21, 2020 Can confirm, tried setting up ARK-UD beacon 1 at 114.166 and couldn't get it to work in MP. Haven't tried SP though. [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo Link to comment Share on other sites More sharing options...
unknown Posted November 23, 2020 Share Posted November 23, 2020 (edited) Works fine for me in SP(OB). (should be 1440p after YT processing) ARK-UD-Test.miz Edited December 3, 2020 by unknown Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings Link to comment Share on other sites More sharing options...
Looney Posted November 24, 2020 Share Posted November 24, 2020 I was too far away and on the ground I didn't get a signal. It works now, thanks. [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo Link to comment Share on other sites More sharing options...
unknown Posted November 25, 2020 Share Posted November 25, 2020 I was too far away and on the ground I didn't get a signal. It works now, thanks. :thumbup: Line of sight is modeled for all radio equipment in DCS, if the transmitter is behind a hill and you're not high enough....nothing. :beer: Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings Link to comment Share on other sites More sharing options...
Recommended Posts