[OLD BUG REPORTS] Cleaning and Organization of old posts

[HiCKS-BB15]

Don't forget the bug tracker, to follow job done :

 

 

https://view.monday.com/359486503-b7a6e80baf97b7cb2b65082f5ece45af

 

 

via :

 

(on the upper right : BUG TRACKER)

 

 

https://www.razbamsimulations.com/

[Steph21]

JF17 on RWR issue:

Attached track file to show that when JF17 radar is supporting missile launch, it's displayed at the center of RWR, making impossible to know its relative position to our plane.

As a comparison, i've put a Mig 29 in the mission, it can be seen easily the difference of behaviour on the RWR when Mig 29 radar is supporting missile launch.

JF17 RWR.trk

[amalahama]

Wow.if just razbam solves those bugs, community and mirage fans would burst on tears.

[astazou]

Here is my contribution to the small compilation:

 

 

NVG and/or cockpits lights not adapted to the 2.5.6

Since the new light system brought by the 2.5.6 version, the night flights with the 2000 become a pain

We don't know how is it IRL, so we don't know if the gain of the NVG should be ajustable or not, but for sure, it's too high

For now, night pilots have to use this mod: https://www.digitalcombatsimulator.com/fr/files/3303791/

Is it possible to adapt the NVG to the new light system please?

Here are two examples:

In attachment the .trk

 

 

 

 

 

 

 

 

 

light knobs visually stop, but scroll continues

A small bug on the cockpit light knobs, when you put light to maximum scrolling up on the knob, there is no problem, it naturaly stops, but when you scroll down to shutdown the light, the knob visually stops at the "0" position, but you can continue to "scroll down", and when you want to scroll up to put light again, you have to scroll up without effect until you scroll enough to make the knob working again

In attachment you will find a zip getting the .log and the .trk

 

 

 

 

 

 

 

 

Thx for the work

reportInfinteScrollDown.zip

NVG_tooHigh.trk

[SharpeXB]

The AOA HUD indication when landing is not functioning

I am doing mission 11 in the Red Flag Campaign and it’s not working.

 

When I try the Instant Action Caucuses Landing mission I see this functioning normally. The bug seems specific to RF mission 11

Edited March 29, 2020 by SharpeXB

[SharpeXB]

The PCA panel doesn’t respond to mouse control.

The upper row will respond to key commands but not the lower row

HOTAS commands still work.

 

I’m experiencing this trouble in the Red Flag Mission 11. Don’t know if this is a bug specific to the campaign or a bug in general.

[Zeus67]

Question, where you using MAG or CAN? PCA bottom row is disabled when Magic or AA guns are the selected weapon. PCA bottom rown is enabled when the CNM (Canon-Neutral-Magic) HOTAS switch is in the N (neutral) position,

[SharpeXB]

Question, where you using MAG or CAN? PCA bottom row is disabled when Magic or AA guns are the selected weapon. PCA bottom rown is enabled when the CNM (Canon-Neutral-Magic) HOTAS switch is in the N (neutral) position,

Yes that was the problem. Thanks

[D4n]

Yep, bug also is: in DCS M2000 SPECIAL settings, the box "Show the AOA in the HUD" gets unticked by itself when ticking it, hitting "OK" and returning to the setting.

[jojo]

The AOA HUD indication when landing is not functioning

I am doing mission 11 in the Red Flag Campaign and it’s not working.

 

When I try the Instant Action Caucuses Landing mission I see this functioning normally. The bug seems specific to RF mission 11

 

Are you talking about the AoA value (DanielNL answered, it's now optional), or the AoA bracket visible in landing mode ?

 

For the later you need to select APP (APProach) mode on PCA top row. It isn't automatic with gear down.

[D4n]

(DanielNL answered, it should be optional once fixed)

fixed :/

[Snappy]

fixed :/

 

 

What do you mean, its fixed?Was there an update?

Its still not working on my system. When you check the special options tab for AOA , it still doesn't display..

 

 

Regards,

 

Snappy

[D4n]

What do you mean, its fixed?

 

I meant I "edited" jojo's reply in my quote to include that it is a bug currently, because jojo wrote it as if it's working currently ("DanielNL answered, it's now optional"), sorry for the misunderstanding.

[Snappy]

Ok got it, no problem. Just wanted to confirm, that the bug still exists.

 

 

Regards,

 

Snappy

[Distiler]

I second that. if previously in Nav mode, when we go back to neutral after Magic or AA gun mode, the Nav mod does not come back properly and the PCA top row still in "attack/weapon" mode. To exit "attack/weapon" mode we need to manually hit the PCA MAG or CAS button (one or two times) to "reset" the PCA.

 

It happened also to myself. It's in the bug tracker, first it seems it was fixed but then the last state shows as partially fixed.

[Steph21]

New bug in latest Open Beta 2.5.6.45915

INS Bombing: Wrong units of measure for BAD Delta Altitude

 

When entering Delta Altitude for INS bombing on PCN in feet, systems takes it as meters and transforms it as feet before entering the value in the feet windows.

I have to calculate my Delta Alt in meters, to enters meters value in the feet altimeter box to get the correct delta alt in feet

Works fine if entered in meters in right window.

 

Attached a track where i show on F10 map that my target is 4.10 Nm at 066° from IP (IP being where the river goes into the sea) and target is 59ft higher than IP.

In PCN, i enter +00059 in left windonw on BAD Delta Alt, and it transorms it in 18ft (which is 59 meters). So i have to enter 180 in feet windows to get 55 feet displayed (roughly what i need).

INS CCRP delta ALT and rho units issue.trk

Edited April 1, 2020 by Steph21
Removed part on Rho issue, as it seems Zeus confirmed that Rho as to be entered in km (probably form feedback from AdA)

[Steph21]

@MyHelljumper: you might turn crazy if you keep initial post updated.

I guess it would be fine for Zeus if we create seperate thread for each new bugs with a track file attached.

 

Let me know what you think, i'll create seperate thread for the bug above if needed.

Edited March 31, 2020 by Steph21

[Moody1204]

Now fixed !

 

Thanks Zeus/Razbam

[ivo]

Hi to all with last update the IP bombing should be fix... but for my impression it is the same before patch, yes now I can release the GBU 12 but too far as usual from targhet

[Steph21]

Hi to all with last update the IP bombing should be fix... but for my impression it is the same before patch, yes now I can release the GBU 12 but too far as usual from targhet

 

Automatic release works now in CCRP. It hasn't been the case for months (years ?).

I do get a new issue that impact calculated release point as it messes up target location. It's described here: https://forums.eagle.ru/showpost.php?p=4266905&postcount=15

You can check if you get the same issue, and try the workaround explained.

 

It should be easily fixed, just a matter of units.

[Steph21]

There is also a bug with le standard radar vs CC modes. If the radar is in "Silent" mode and we select any CC mode, the radar exists the "Silent" mode (maybe this is intented, I don't know), but if we exist/Return to normal mode (Radar Unlock / Exist special mode), the Radar do not return in "Silent" mode, but still in "Emit" mode, despite the radar power switch position on the panel. To return in "Silent" mode, we must manually change de radar power switch position.

 

This one is fixed in latest Open Beta

[tugais]

The way it is handled right now is the best one if the OP can keep with it. You just have to go to the first post to see what's waiting to be fixed, very useful. Many thanks to MyHellJumper for his work.

[myHelljumper]

Will update the first post ASAP :).

[ivo]

Automatic release works now in CCRP. It hasn't been the case for months (years ?).

I do get a new issue that impact calculated release point as it messes up target location. It's described here: https://forums.eagle.ru/showpost.php?p=4266905&postcount=15

You can check if you get the same issue, and try the workaround explained.

 

It should be easily fixed, just a matter of units.

 

New bug in latest Open Beta 2.5.6.45915

 

INS Bombing: Wrong units of measure for BAD Delta Altitude and Rho

 

When entering Delta Altitude for INS bombing on PCN in feet, systems takes it as meters and transforms it as feet before entering the value in the feet windows.

I have to calculate my Delta Alt in meters, to enters meters value in the feet altimeter box to get the correct delta alt in feet

Works fine if entered in meters in right window.

 

Same issue for Rho, as system thinks that value entered is km, not Nm. But display doesn't change this time.

 

Attached a track where i show on F10 map that my target is 4.10 Nm at 066° from IP (IP being where the river goes into the sea) and target is 59ft higher than IP.

In PCN, i enter +00059 in left windonw on BAD Delta Alt, and it transorms it in 18ft (which is 59 meters). So i have to enter 180 in feet windows to get 55 feet displayed (roughly what i need).

 

Regarding Rho, i entered 4.10 in left windows, supposed to be in Nm. Then i fly toward IP, overfly it, and follow cue to target. As you can see in the track, target cross is way short of target position. So system probably thought it was 4.10 km which is 2.2 Nm (way too short indeed as target is at 4.10 Nm)

Then for the second pass, i enter 7.6 in left window (for 7.6 km which is 4.10 Nm), then target cross is (roughly) on the target position.

Attached Files

File Type: trk INS CCRP delta ALT and rho units issue.trk (2.74 MB, 1 views)

 

Thank today I will try

[Moody1204]

Well it's not a bug: units have changed ! :smilewink:

 

 

 

It would have been nice to include this "little detail" in the changelog.

 

 

RazbamZeus confirmed the change in units on Razbam's discord.

 

 

Offsets for IP are in metrics (also on the HUD) while the rest is in imperial (HSI still in imperial when flying to target).

 

 

It's confusing and we haven't had an "official" word about that :music_whistling:

 

 

 

I know INS bombing is useless with all these JDAM/JSAW etc but still, it is an important change and deserve to be noticed.