john4pap Posted January 17, 2020 Share Posted January 17, 2020 Today was the first time I noticed it while re-playing the campaign. Tried it in quick mission too... same bug. Other planes aren't affected so it appears it is a problem with the mirage. Keybindings are ok (although orange for some reason). Has anyone else noticed this? Link to comment Share on other sites More sharing options...
Moody1204 Posted January 18, 2020 Share Posted January 18, 2020 Hi guys, When being locked by JF17 the RWR is still bugged (see attached), symbol is centered and so no information on where the threat is. It was still the case before last update. Can we please get a hotfix ? Thanks Link to comment Share on other sites More sharing options...
Cine Posted January 19, 2020 Share Posted January 19, 2020 Hello With M2000c, there is 2 training mission (Caucasus and Nevada). In both case the radar lock the first target only few moment (let's say 10 to 20 second) then the target disapear from radar and it is impossible to see it again. To be notice (in current mission) that to have radar in lock mode is complicated (have to push to 530 (for instance) after POL and then TOP and in this case it is not well working and I am unable to launch the missile (Nothing happend when pressing the trigger) If you have some explanations about it… I will thank you to share it with me. Regards Renaud Link to comment Share on other sites More sharing options...
baltic_dragon Posted January 19, 2020 Share Posted January 19, 2020 Hey Renaud, the changes to M-2000C and radar are still being implemented and some of the training missions will need to be updated of course, but I can only effectively do that after the airplane itself is finished. So there may be bugs in some missions. Link to comment Share on other sites More sharing options...
Cine Posted January 19, 2020 Share Posted January 19, 2020 Hello thank you for this answer. To help, please find a file with the curent lock pb (and you cannot see be unable to fire) Regards RenaudM2000 radar and fire bug.trk Link to comment Share on other sites More sharing options...
=36=Witcher Posted January 19, 2020 Share Posted January 19, 2020 I can flip the pages with my profile. If the mappings are red there must be something on your profile. Link to comment Share on other sites More sharing options...
Frederf Posted January 19, 2020 Share Posted January 19, 2020 The orange markings indicate there is something corrupt in your .lua or .lua.diff with your controls. Link to comment Share on other sites More sharing options...
Ramsay Posted January 19, 2020 Share Posted January 19, 2020 (edited) With M2000c, there is 2 training mission (Caucasus and Nevada). In both case the radar lock the first target only few moment (let's say 10 to 20 second) then the target disapear from radar and it is impossible to see it again. The target aircraft is a KC-135 flying the same course as yourself @ 426 kts GS. The M2K doppler radar has a ground return filter that will filter any returns that have a similar speed to yourself i.e. +/- 40 kts closure ? As you have noted, the M2K at times, has difficulty detecting targets from behind in RWS and TWS (PID). When I have difficulty, I undesignate and switch to RWS (no PID or PIC bottom right of VTB screen) before trying to reacquire a target. "Strangely" switching to one of the dogfight modes - the radar has little trouble acquiring a SST (PIC) lock, so perhaps it is bugged in someway. To be notice (in current mission) that to have radar in lock mode is complicated (have to push to 530 (for instance) after POL and then TOP and in this case it is not well working and I am unable to launch the missile (Nothing happend when pressing the trigger) In your track you activate the POLICE mode "POL" - this inhibits the weapons from firing i.e. for policing civilian airspace, air corridors, etc. I'm not sure what you are trying to do in your track but if trying to fire with POL selected, that is why you can't. Edited January 19, 2020 by Ramsay i9 9900K @4.7GHz, 64GB DDR4, RTX4070 12GB, 1+2TB NVMe, 6+4TB HD, 4+1TB SSD, Winwing Orion 2 F-15EX Throttle + F-16EX Stick, TPR Pedals, TIR5, Win 10 Pro x64, 1920X1080 Link to comment Share on other sites More sharing options...
Moody1204 Posted January 20, 2020 Share Posted January 20, 2020 Anyone ? Link to comment Share on other sites More sharing options...
caponi Posted January 21, 2020 Share Posted January 21, 2020 (edited) Hi, in my Mirage i use the Cockpit and Instrument lights well but if use the Flood lights (green and/or white) than my FPS drops down about 30% :music_whistling: But i must say, i have the same behaviour on ED's F-16 ... May be that this is not a specific Mirage problem ... Thx in advance Edit said: i use a 4k monitor a Test with clean DCS and full HD have no influence as i change my resolution to 4k this behaviour appears (MSAA off) and workaround in all modules: let the flood loghts off Edited January 22, 2020 by caponi too much ... Link to comment Share on other sites More sharing options...
rinkerbuck Posted January 22, 2020 Share Posted January 22, 2020 I've never noticed that.. will have to check my fps Link to comment Share on other sites More sharing options...
Moody1204 Posted January 22, 2020 Share Posted January 22, 2020 Just for everyone to understand that the problem comes from the Mirage, here is a screen of the same situation (same mission) but with F15. There is no problem with the RWR in this case. Link to comment Share on other sites More sharing options...
Highwayman-Ed Posted January 24, 2020 Share Posted January 24, 2020 (edited) Bump, same problem. But until the official update, I've done a quick hatchet job and changed the cockpit arguments in the mission triggers to highlight and check the new radio. You can get my modified version here: M-2000C Batumi Cold Startup Training Mission Edited January 24, 2020 by Highwayman-Ed Intel i9-9900KF @5.2GHz MSI Z390 Gaming Pro Carbon 32GB G.Skill Trident Z DDR3200 RAM MSI RTX 2080 Ti Gaming X Trio 40" Panasonic TH-40DX600U @ 4K Pimax Vision 8K Plus / Oculus Rift CV1 / HTC Vive Gametrix JetSeat with SimShaker Windows 10 64 Bit Home Edition [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
rinkerbuck Posted January 28, 2020 Share Posted January 28, 2020 I did notice they cause a frame rate hit but for me it was like 60 fps to 50 on the ground. I can't really tell the difference between 40 and 60 in a flight sim luckily. Link to comment Share on other sites More sharing options...
Cimarron Posted January 29, 2020 Share Posted January 29, 2020 Any hope or ETA on fixing this¿ Still broken here. Current beta, Link to comment Share on other sites More sharing options...
Pickle72 Posted January 30, 2020 Share Posted January 30, 2020 Same here. I am new to the Mirage so was not sure it was me or not. After first Magic shot I have to toggle CNM to Neutral, CMD to Neutral and then CMD FWD (if im using radar) and CNM AFT to select Magic again. Or the short answer- fire first, start from scratch to fire second. T-16000M FCS | Track IR5 | Quest 2 | ASROCK Z370 | i7-8700k | GTX1080-OC | 32GB DDR4 | Windows 10 | OSX High Sierra for real work Hack build Link to comment Share on other sites More sharing options...
Steph21 Posted January 31, 2020 Share Posted January 31, 2020 (edited) Never had this issue but i use a 3-pos switch, so not the 3 CNM input but the 'Magic Else PCA' and 'Canon Else PCA' input in Controls. Not sure if it's linked to your issue. While in Magic mode, you should be able to fire your Magic Do you slave Magic to radar before each shot if using radar ? Edited January 31, 2020 by Steph21 Link to comment Share on other sites More sharing options...
Moafuleum Posted January 31, 2020 Share Posted January 31, 2020 Hi Title says it all. When you try to enter a manual frequency into the new digital VHF radio and want to clear the input (for example if you mistyped a digit) then only the display is cleared but not the input buffer. If you start over to input the new frequency you can't because the input buffer still holds what you had put in before you hit the CLR button. The attached track demonstrates this issue. Certainly a one-line fix. Thanks for having a look! Link to comment Share on other sites More sharing options...
scopewizard Posted February 3, 2020 Share Posted February 3, 2020 I searched in the bug thread of the M-2000 but did not find my problem. I do not know if anyone else has experienced this. I use Thrustmaster Warthog throttle switches (4 way hat and push button) on right throttle for U/VHF, UHF and radio menu radio select. In the control section of the M-2000 these HOTAS radio select switches are bind and indicate that they are indeed working. However, while in flight they do not work except one for radio menu select. Thank you. Link to comment Share on other sites More sharing options...
diditopgun Posted February 3, 2020 Share Posted February 3, 2020 (edited) EA december 2015 Release april 2017 February 2020, automatic release still not work in PI bombing mode after multiple reports (but work in CCRP since the beginning...) Sorry but it's shameful !... Edited February 3, 2020 by diditopgun [sIGPIC][/sIGPIC] Intel I7 8700K / RTX 3080 / 32Go DDR4 PC21300 G.Skill Ripjaws V / MSI Z370 Gaming Pro Carbon / Cooler Master Silent Pro Gold - 1000W / Noctua NH-D14 / Acer XB270HUDbmiprz 27" G-synch 144Hz / SSD Samsung 860EVO 250Go + 1To / Cooler Master HAF X / Warthog+VPC WarBRD / Thrustmaster TPR / Track-IR v5 + Track Clip Pro / Windows 11 64bits. Link to comment Share on other sites More sharing options...
Ramsay Posted February 3, 2020 Share Posted February 3, 2020 Not sure on the buttons in the real M-2000C but in DCS I have 3 buttons bound to my HOTAS. • Com menu = / ("#" in the UK) • HOTAS > Main U/VHF Radio SELECT = LShift + NUM+ • HOTAS > Aux. UHF Radio SELECT = LShift + NUM- Select the radio to transmit by pressing it's select button, then use "/" like a mic switch to transmit/contact ATC, AWACS, etc. AFAIK the Mirage only has one mic switch. i9 9900K @4.7GHz, 64GB DDR4, RTX4070 12GB, 1+2TB NVMe, 6+4TB HD, 4+1TB SSD, Winwing Orion 2 F-15EX Throttle + F-16EX Stick, TPR Pedals, TIR5, Win 10 Pro x64, 1920X1080 Link to comment Share on other sites More sharing options...
jojo Posted February 4, 2020 Share Posted February 4, 2020 I searched in the bug thread of the M-2000 but did not find my problem. I do not know if anyone else has experienced this. I use Thrustmaster Warthog throttle switches (4 way hat and push button) on right throttle for U/VHF, UHF and radio menu radio select. In the control section of the M-2000 these HOTAS radio select switches are bind and indicate that they are indeed working. However, while in flight they do not work except one for radio menu select. Thank you. You probably have "easy comms" option checked in DCS menu. Unselect easy comms. Mirage fanatic ! I7-7700K/ MSI RTX3080/ RAM 64 Go/ SSD / TM Hornet stick-Virpil WarBRD + Virpil CM3 Throttle + MFG Crosswind + Reverb G2. Flickr gallery: https://www.flickr.com/gp/71068385@N02/728Hbi Link to comment Share on other sites More sharing options...
jojo Posted February 4, 2020 Share Posted February 4, 2020 Not sure on the buttons in the real M-2000C but in DCS I have 3 buttons bound to my HOTAS. • Com menu = / ("#" in the UK) • HOTAS > Main U/VHF Radio SELECT = LShift + NUM+ • HOTAS > Aux. UHF Radio SELECT = LShift + NUM- Select the radio to transmit by pressing it's select button, then use "/" like a mic switch to transmit/contact ATC, AWACS, etc. AFAIK the Mirage only has one mic switch. Mmmmmh, what you describe is weird. Do you have SRS or something similar with PTT option ? IRL the throttle has a 2 ways PTT. On PTT position for each radio (so 2). In game, you open a comms menu for each radio. If you set AWACS frequency on red radio, ATC frequency on green radio and you try to call AWACS on green radio, you will have AWACS menu, but he won't answer. Mirage fanatic ! I7-7700K/ MSI RTX3080/ RAM 64 Go/ SSD / TM Hornet stick-Virpil WarBRD + Virpil CM3 Throttle + MFG Crosswind + Reverb G2. Flickr gallery: https://www.flickr.com/gp/71068385@N02/728Hbi Link to comment Share on other sites More sharing options...
scopewizard Posted February 4, 2020 Share Posted February 4, 2020 HOTAS radio select M-2000 Thank you all for your comments. I will verify about easy comms although other aircraft work as they should. I will also undo mute in Discord and veryfy SRS. You see, before I moved my thrustmaster warthog radio button forward and had access to UHF radio or I moved it backward and had access to V/UHF radio. Will continue to explore!!! Link to comment Share on other sites More sharing options...
Steinsch Posted February 4, 2020 Share Posted February 4, 2020 (edited) I can't seem to make it work in 2.5.5.41371 (Switch ON + HOTAS). Any news? Edited February 5, 2020 by Steinsch Steinsch Flying Virtual F-15s since 1989 YouTube channel: http://www.youtube.com/c/CommanderSteinsch Link to comment Share on other sites More sharing options...
Recommended Posts