Jump to content

[REPORTED]Radar in AG mode detects targets in the air.


Martin2487

Recommended Posts

I found that when I switch the radar to AG, I am still able to detect targets in the air. Information on the speed and altitude targets is still updated. I tested the problem, the test is part of the attached track. On the AMPCD, I viewed the SA page and switched to AG with a button in the cockpit. As you can see the radar still detects targets. If AG activates the radar using the SURF button on the radar screen I see the same problem.

 

It is obvious that this is clearly a bug. APG-73 is not an AESA radar. It can operate in one mode only. It cannot track targets in the air and on the ground at the same time.

 

https://drive.google.com/file/d/1AI-Ccg7v03yhUuDUszdNBEFHorHTVceZ/view?usp=sharing

Link to comment
Share on other sites

I found that when I switch the radar to AG, I am still able to detect targets in the air. Information on the speed and altitude targets is still updated. I tested the problem, the test is part of the attached track. On the AMPCD, I viewed the SA page and switched to AG with a button in the cockpit. As you can see the radar still detects targets. If AG activates the radar using the SURF button on the radar screen I see the same problem.

 

It is obvious that this is clearly a bug. APG-73 is not an AESA radar. It can operate in one mode only. It cannot track targets in the air and on the ground at the same time.

 

https://drive.google.com/file/d/1AI-Ccg7v03yhUuDUszdNBEFHorHTVceZ/view?usp=sharing

 

Any AWACS or other donors in the air? You saw the A/A target on SA page not on A/G radar, correct?

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...