Caster Posted September 29, 2020 Share Posted September 29, 2020 Posting this while waiting on virpil support to see if there's a DIY fix so I can avoid an RMA :D Got a new MongoosT-50CM2 a few weeks back, and have been having issues with a very tempermental connection to the the base. A replacement USB cable hasn't fixed the issue, so I'm assuming it's the USB port on the base itself. Sometimes it works fine, but if the cable is moved it can lose connection. Anyone had experience with this? Fly fast and leave a pretty wreck Link to comment Share on other sites More sharing options...
Caster Posted September 29, 2020 Author Share Posted September 29, 2020 Having popped off the base plate, it all looks fine (I'm not electrician) and the connection to the connector seems secure, not hopeful on avoiding the RMA Fly fast and leave a pretty wreck Link to comment Share on other sites More sharing options...
HC_Official Posted September 30, 2020 Share Posted September 30, 2020 to test it out properly you will need a multimeter and then check the resistance from the where the cable connects inside the base board to the PC end of the USB cable, then check where the cable connects inside the base board to the pins on the connector on the outside of the throttle No more pre-orders Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
Recommended Posts