Jump to content

Interactive Kneeboard Extension


Hollywood_315

Recommended Posts

1 hour ago, RogueSqdn said:

Turning off auto browse does not fix the intermittent ATC page. emoji2357.png


Sent from my iPhone using Tapatalk Pro

Different problem that's why I quoted eagleace specifically.

 

I gather you've tried putting in a command into the Vaicom VA profile for the ATC tab and that didn't work, if not surely it's worth a shot?

 

I've got all the Interactive tabs working via the "Execute an External Plugin Fuction" using the commands detailed in the manual.

 

I use VSPX and as of now not all the calls work via Vaicom on its own, without the additional commands being added into the Vaicom profile .

 

Other than that I'm outta ideas @hornblower793 or Hollywood himself are the best bets to help you.

 

I'd also go direct to the Vaicom website and raise the query, although Hollywood visits here from time to time, I've always found shooting a query on the Vaicom website gets a faster response than posting up here.

  • Like 1
Link to comment
Share on other sites

Yes, I do have a command created, but unfortunately it only works about half the time. I can’t seem to narrow down why.

Not at home now so I can’t give you more information than that. I CAN tell you that I have left/right cycle tabs and a command for the REF tab working. The left/right cycle skips past the ATC tab most of the time also.


Sent from my iPhone using Tapatalk Pro

DEFENSOR FORTIS

Spoiler

Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE

Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL

Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)

 

Link to comment
Share on other sites

22 hours ago, RogueSqdn said:

Yes, I do have a command created, but unfortunately it only works about half the time. I can’t seem to narrow down why.

Not at home now so I can’t give you more information than that. I CAN tell you that I have left/right cycle tabs and a command for the REF tab working. The left/right cycle skips past the ATC tab most of the time also.


Sent from my iPhone using Tapatalk Pro

Exactly the same happening here. Vocally or with keyboard shortcuts set in the Vaicom profile, the ATC tab doesn't really work. And I've also tried unselecting the Auto Browse option in the Config app. It doesn't make any difference. Funny because all other kneeboard tabs work perfectly. And I've also set  "next page" and "previous page" commands in the profile, through the External Plugin Function but it never shows the ATC tab.

 

Judy


Edited by Judy1301
Typo's
Link to comment
Share on other sites

In Carrier the ATC does not write the spoken instructions in the kneeboard?

Can confirm. Same problem here.


Sent from my iPhone using Tapatalk

__________________

overalien

Hog Driver starting to really like the Tomcat

 

System specs:

Intel i7-8700k - OC to 5.0 GHz

| 32 GB RAM 3600 MHz | Nvidia 1080ti SLi | Mixed Storage - Win 10 and DCS on Samsung SSD 970 Pro

Flightgear:

7 Displays (3 x 1440p, 1 X 1080p, 3 X Lilliput Touch) | 3 x Cougar MFDs

| Warthog HOTAS | Thrustmaster TPR Pedals | iBEAM Shaker + Simshaker for Aviators w. Sound Module | Helios | VAICOM Pro + AIRIO | TrackIR 5

Link to comment
Share on other sites

1 hour ago, overalien said:


Can confirm. Same problem here.


Sent from my iPhone using Tapatalk

 Yeah me too. Along with tab issues as others have said. Shame as I thought this was an amazing addition to DCS, almost essential really as its plugs a real gap and would make mission planning and execution so much more easily. Takes so long to collect all co-ords, and radio frequencies and get them into a kneeboard. I really think ED need to incorporate this sort of thing into core DCS. Even without the voice command bit.

Link to comment
Share on other sites

In my case, it’s the manual tab commands that won’t work to bring up the ATC page. Haven’t tried it by voice.


Sent from my iPhone using Tapatalk Pro

DEFENSOR FORTIS

Spoiler

Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE

Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL

Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)

 

Link to comment
Share on other sites

1 hour ago, Hollywood_315 said:

Update with FINISH and use the corect syntax e.g. ' JTAC,... Page'.  See manual.

Carrier CASE I works, CASE III doesn't: known issue.

 

 I'll re-read the manual. I may have not done everything correctly. Thanks. If the profile in VA has the words listed then they will be saved correctly?, is that right?

Link to comment
Share on other sites

Manual tab commands??
 


You can manually program commands into Voiceattack to switch to individual tabs, or to cycle left/right between them. It’s covered in the VAICOM manual.


Sent from my iPhone using Tapatalk Pro
  • Like 1

DEFENSOR FORTIS

Spoiler

Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE

Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL

Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)

 

Link to comment
Share on other sites

21 hours ago, RogueSqdn said:

 


You can manually program commands into Voiceattack to switch to individual tabs, or to cycle left/right between them. It’s covered in the VAICOM manual.


Sent from my iPhone using Tapatalk Pro

 

That works for me, I can bind it to my button box. Great! Prefer that to voice command. Thanks!

Link to comment
Share on other sites

Just purchased the Kneeboard extension.

It said to activate in the Vaicom config menu, but I do not see anything in there related to activating the Kneeboard extension?
Is this done automatically?

Don B

 

My VKB Gunfighter MK III Pro L Review

EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler |VKB GF MK III Pro L Ultimate Grip| Virpil CM3 Throttle |Reverb G2 | Valve Index| Vive Pro 2 |

Link to comment
Share on other sites

Just stick the Key No into the (enter license key here) box followed by your email address in the (enter email address here) box in the  About Tab of the Vaicom pop up and after it registers with the server, which might take a few tries and it should be good to go.

 

Remember when putting in the Serial No & mail address to delete the (enter license key here) & (enter email address here) bfore putting in the details

Link to comment
Share on other sites

43 minutes ago, Weegie said:

Just stick the Key No into the (enter license key here) box followed by your email address in the (enter email address here) box in the  About Tab of the Vaicom pop up and after it registers with the server, which might take a few tries and it should be good to go.

 

Remember when putting in the Serial No & mail address to delete the (enter license key here) & (enter email address here) bfore putting in the details

 

👍

 

Thank you!

Don B

 

My VKB Gunfighter MK III Pro L Review

EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler |VKB GF MK III Pro L Ultimate Grip| Virpil CM3 Throttle |Reverb G2 | Valve Index| Vive Pro 2 |

Link to comment
Share on other sites

  • 2 weeks later...

@Hollywood_315 and the entire VAICOM team (I assume there's a team?):

Thank you for this great tool!

 

As a Voice Attack and VAICOM Pro newcomer, the new interactive kneeboard is very helpful. Obviously stuff like being able to readback JTAC coordinates is extremely useful in VR. But also, for someone new like me, it really helps to see all the different possible radio callout lines (in the right side of the kneeboard).

 

Also, as a non native English speaker, I'm amazed by how good my voice commamds are recognized (I only did the Windows voice recognition test once).

 

VAICOM Pro and this kneeboard really enhanced my DCS experience!!

System specs:

 

i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme

HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM

 

~ No war today... the enemy just called in sick ~ GUMMBAH

Link to comment
Share on other sites

On 11/29/2020 at 9:25 PM, Biga42 said:

I realized that when you switch to ATC page is showing radios frequencies as 3.125, 4.123...etc, is possible to show the frequencies as 127,500...etc? Is it a configuration issue?

thanks!

@Hollywood_315 Do you know if there is a solution to this?

  • Like 1

i9-9900KS CPU @ 5.1GHz, Win10 Pro 64bit, Gigabyte Z390 Master Mobo, Corsair Vengance 64GB 3000Mhz Ram, 1 x ADATA SX8200 Pro 1Tb Drive (OS), 1 x ADATA SX8200 Pro 512Gb Drive (DCS), 1 x RTX 2080Ti AORUS Waterforce 11Gb, 3 x 27" ACER Predator 2560x1440px, 27" LG 2560x1440px HP Reverb G2, TrackIR5, HOTAS Warthog Throttle and Stick, 3 x HOTAS Cougar MFCDs, Elgato Streamdeck & Streamdeck XL

Link to comment
Share on other sites

Any news / release of the update to fix the known issue of  Case II /III ATC notes not being made? 

 

Also is the player dictation function working? Mine doesnt do anything!?

 

 


Edited by funkster
Link to comment
Share on other sites

6 hours ago, funkster said:

Any news / release of the update to fix the known issue of  Case II /III ATC notes not being made? 

https://forums.eagle.ru/topic/257727-happy-new-year/

I'm Softball on Multiplayer. Dell XPS-8500 24GB, i7-3770@3.40GHz, Win 10Pro, Nvidia GeForce GTX 1060 6GB, TiR, VKB Gunfighter III with MCG Ultimate grip, CH throttle and pedals, all maps, most modules

Link to comment
Share on other sites

I have noticed that I can't get much of my misson briefing to appear on the first page, seems to just get the first word or two and then that's it. This would be really handy so I can finally add co-ordinates to brief in ME and then see them on kneeboard. I know this can be done view the ESC key but I can't directly copy co-ords from hat into aircraft as I have to keep stopping and starting.

Link to comment
Share on other sites

I´m having a problem with the dictation mode. Everything  works as it should, exept the dictation mode. I can start it, the red "dict on" is turned on, but it doesn´t write anything down. No matter if I keep the PTT pressed or not. Any ideas? thx

 

btw: Great addition to vaicom, thx for that Hollywood! Keep up the great work! Really appreciate it!

 

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...