SailorDoc4781 Posted August 1, 2020 Share Posted August 1, 2020 Can anyone suggest mounts for 2 Thrustmaster MFDs? I hope to purchase CubeSim's display units that will go inside the TM MFD shells. They will be used for the Left and Right DDI on the F18. Thank you. Link to comment Share on other sites More sharing options...
VpR81 Posted August 1, 2020 Share Posted August 1, 2020 (edited) I'm using the Monstertech MFD mounts and i'm very satisfied with them. The have a type for left/right MFDs and a different one for center MFDs. The only issue is the price, i payed roughly 125€ for 3 MFD mounts including shipping. But i'm living in Germany where Monstertech is located, so shipping was peanunts. https://www.monstertech.de/en/product/mfd-tablet-mount/ The only thing you will need is either a Monstertech rig/desk mount, or a DIY solution using the same aluminium rails Monstertech uses. The stuff is easy to get and not too expensive, i payed like 30€ for a 600mm bar in black, wich is slightly more expensive than silver. They don't come with a thread like on the picture, i tapped them by myself. But i've seen online shops for these profiles offering threading as an extra service at checkout. Edited August 1, 2020 by VpR81 Phanteks EvolvX / Win 11 / i9 12900K / MSI Z690 Carbon / MSI Suprim RTX 3090 / 64GB G.Skill Trident Z DDR5-6000 / 1TB PCIe 4.0 NVMe SSD / 2TB PCIe 3.0 NVMe SSD / 2TB SATA SSD / 1TB SATA SSD / Alphacool Eisbaer Aurora Pro 360 / beQuiet StraightPower 1200W RSEAT S1 / VPC T50 CM2 + 300mm extension + Realsimulator F18 CGRH / VPC WarBRD + TM Warthog grip / WinWing F/A-18 Super Taurus / 4x TM Cougar MFD / TM TPR / HP Reverb G2 Link to comment Share on other sites More sharing options...
SailorDoc4781 Posted August 3, 2020 Author Share Posted August 3, 2020 Thank you VpR81 for your reply, very nice setup BTW....thanks again. I have FOXX mount for my TM Warthog HOTAS, so I dont know if he makes a similar product like Monstertech Link to comment Share on other sites More sharing options...
Supmua Posted August 3, 2020 Share Posted August 3, 2020 Thank you VpR81 for your reply, very nice setup BTW....thanks again. I have FOXX mount for my TM Warthog HOTAS, so I dont know if he makes a similar product like Monstertech Foxx can probably make something similar. If not the Monstertech panel mount will work, you will need smaller nut/screw though (6mm instead of 8 mm), since Foxx aluminum profile is smaller. PC: 5800X3D/4090, 11700K/3090, 9900K/2080Ti. Joystick bases: TMW, VPC WarBRD, MT50CM2, VKB GFII, FSSB R3L Joystick grips: TM (Warthog, F/A-18C), Realsimulator (F-16SGRH, F-18CGRH), VKB (Kosmosima LH, MCG, MCG Pro), VPC MongoosT50-CM2 Throttles: TMW, Winwing Super Taurus, Logitech Throttle Quadrant, Realsimulator Throttle (soon) VR: HTC Vive/Pro, Oculus Rift/Quest 2, Valve Index, Varjo Aero, https://forum.dcs.world/topic/300065-varjo-aero-general-guide-for-new-owners/ Link to comment Share on other sites More sharing options...
SailorDoc4781 Posted August 3, 2020 Author Share Posted August 3, 2020 Thank you Supmua for your reply... Link to comment Share on other sites More sharing options...
Recommended Posts