Jump to content

Recommended Posts

On the thread posted by Rob10, post #214 there is a tutorial document about creating new binds. Here is a bunch of binds I created for the F/A-18C, for myself and other players.:

{down = SMS_commands.MasterArmSw, up = SMS_commands.MasterArmSw, cockpit_device_id = devices.SMS, value_down =  1.0, value_up = 0.0, name = _('Master Arm Switch 2-Pos ARM/SAFE'), category = {_('Instrument Panel'), _('Master Arm Panel')}},
{down = hotas_commands.THROTTLE_EXTERIOR_LIGTHS, up = hotas_commands.THROTTLE_EXTERIOR_LIGTHS,    cockpit_device_id = devices.HOTAS,    value_down =  1.0, value_up = 0.0,    name = _('Exterior Lights 2-Pos ONOFF'), category = {_('Throttle Grip'), _('HOTAS')}},
{down = iCommandPlaneGearUp, up = iCommandPlaneGearDown, name = _('Landing Gear Control Handle 2-Pos UP/DOWN'),    category = {_('Left Vertical Panel')}},
{down = gear_commands.HookHandle, up = gear_commands.HookHandle, cockpit_device_id = devices.GEAR_INTERFACE, value_down =  1.0, value_up =  0.0, name = _('Arresting Hook Handle 2-Pos UP/DOWN'), category = {_('Right Vertical Panel')}},
{down = HUD_commands.HUD_AltitudeSw, up = HUD_commands.HUD_AltitudeSw, cockpit_device_id = devices.HUD,    value_down =  1.0, value_up =  0.0, name = _('Altitude Switch 2-Pos BARO/RADAR'), category = {_('Instrument Panel'), _('HUD Control Panel')}},
{down = cpt_commands.CanopySwitchClose, up = cpt_commands.CanopySwitchOpen, cockpit_device_id = devices.CPT_MECHANICS, value_down =  -1.0, value_up = 1.0, name = _('Canopy Control Switch 2-Pos OPEN/CLOSE'), category = {_('Right Wall'), _('Systems')}},
{down = oxygen_commands.OBOGS_ControlSw, up = oxygen_commands.OBOGS_ControlSw, cockpit_device_id = devices.OXYGEN_INTERFACE, value_down =  1.0,    value_up = 0.0,    name = _('OBOGS Control Switch 2-Pos ON/OFF'), category = {_('Left Console')}},
{down = cptlights_commands.HookBypass, up = cptlights_commands.HookBypass,    cockpit_device_id = devices.CPT_LIGTHS,    value_down =  -1.0,    value_up = 1.0,    name = _('Hook Bypass 2-Pos Switch FIELD/CARRIER'), category = {_('Left Vertical Panel')}},
{down = gear_commands.LaunchBarSw, up = gear_commands.LaunchBarSw, cockpit_device_id = devices.GEAR_INTERFACE, value_down =  -1.0, value_up = 1.0,    name = _('Launch Bar Control 2-Pos Switch RETRACT/EXTEND'), category = {_('Left Vertical Panel')}},
{down = extlights_commands.LdgTaxi,    up = extlights_commands.LdgTaxi, cockpit_device_id = devices.EXT_LIGHTS, value_down =  1.0,    value_up =  0.0, name = _('LDG/TAXI LIGHT Switch 2-Pos ON/OFF'), category = {_('Left Vertical Panel')}},
{down = ctrl_commands.WingFoldPull, pressed  = ctrl_commands.WingFoldSelect, cockpit_device_id = devices.CONTROL_INTERFACE, value_down = 1.0, value_pressed = -1.0, name = _('Wing Fold Control PULL-FOLD'), category = {_('Right Vertical Panel')}},
{down = ctrl_commands.WingFoldSelect, up  = ctrl_commands.WingFoldPull, cockpit_device_id = devices.CONTROL_INTERFACE, value_down = 1.0, value_up = 0.0, name = _('Wing Fold Control SPREAD-STOW'), category = {_('Right Vertical Panel')}},
{down = fuel_commands.DumpSw, up = fuel_commands.DumpSw, cockpit_device_id = devices.FUEL_INTERFACE, value_down =  1.0, value_up = -1.0, name = _('Fuel Dump Switch 2-Pos ON/OFF'), category = {_('Left Console'), _('Fuel Control Panel')}},
{down = fuel_commands.DumpSw, cockpit_device_id = devices.FUEL_INTERFACE, value_down =  1.0, name = _('Fuel Dump Switch ON'), category = {_('Left Console'), _('Fuel Control Panel')}},
{down = fuel_commands.DumpSw, cockpit_device_id = devices.FUEL_INTERFACE, value_down =  -1.0, name = _('Fuel Dump Switch OFF'), category = {_('Left Console'), _('Fuel Control Panel')}},
{down = 3256, up = 3256, cockpit_device_id = 0,    value_down =  -1.0,    value_up =  0.0, name = _('Flashlight 2-Pos ON/OFF'), category = {_('View Cockpit'), _('Right Console')}},
{down = iCommandPlaneShowKneeboard,    up = iCommandPlaneShowKneeboard, value_down = 1.0, value_up = -1.0,    name = _('Kneeboard 2-Pos SHOW/HIDE'), category = _('Kneeboard')},
{down=gear_commands.EmergParkHandleSelectPark, up=gear_commands.EmergParkHandleOnOff,cockpit_device_id=devices.GEAR_INTERFACE,value_down=1.0,value_up=-1.0,name=_('Emergency/Parking Brake Handle - CCW+Pull'),category=_('[13] Front Left - Vertical Panel')},
{down = hotas_commands.THROTTLE_SPEED_BRAKE, up = hotas_commands.THROTTLE_SPEED_BRAKE, cockpit_device_id = devices.HOTAS, value_down = -1.0, value_up = 1.0, name = _('Speed Brake Switch 2-Pos EXTEND/RETRACT'), category = {_('Throttle Grip'), _('HOTAS')}},
{down = elec_commands.PitotHeater, up = elec_commands.PitotHeater, cockpit_device_id = devices.ELEC_INTERFACE, value_down =  1.0, value_up = 1.0, name = _('Pitot Heater Switch - 2-Pos ON/AUTO'), category = {_('Right Console'), _('ECS Panel')}}, -- switch must be in the OFF position at mission start

LeCuvier

Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5

Link to post
Share on other sites
Is there a way to let dcs (f18c) read the throttle base switches positions as 2 positions (Like the a10c)instead of ON/OFF only ?
Here is another well working solution: https://forums.eagle.ru/showthread.php?t=210857

[Modules] A-10C, A-10C II, F-14A/B, F-16C, F/A-18C, FC3, Ka-50, UH-1H, CA, SC

[Maps] PG, NTTR, Normandy, Syria

[PC] Z270F, i7-7700K, 64 GB DDR4-2666, RTX 2080 SUPER 8 GB GDDR6, SSD 970 EVO Plus 1 TB (M.2), 2 x SSD 850 EVO 500 GB (SATA3), 2 TB HDD, TM HOTAS Warthog (Grip@WarBRD Base), MS SW FFB2, Thrustmaster TFRP, TrackIR 5 & TrackClip Pro

[Checklists] A-10C, F-16C, F/A-18C, Ka-50, UH-1H

Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...