Jizzbomb Posted April 7, 2020 Share Posted April 7, 2020 Hi, I'm struggling to get the tanker to respond when declaring intent to refuel. Have tried both manual and simple comms, using both radios set to the specified frequency in the briefing. I've tried on a few different missions including the standard Air to Air refueling mission that comes with the F18. Any ideas on where I'm going wrong or how to fix? Thanks Link to comment Share on other sites More sharing options...
Revelation Posted April 7, 2020 Share Posted April 7, 2020 If you upload a .trk file and the .miz file we can be of more assistance. Just from reading your post, it might be an error in the mission. Win 10 Pro 64Bit | 49" UWHD AOC 5120x1440p | AMD 5900x | 64Gb DDR4 | RX 6900XT Link to comment Share on other sites More sharing options...
VDV Posted April 7, 2020 Share Posted April 7, 2020 Tanker is responding, you are just a poor pilot. Link to comment Share on other sites More sharing options...
Jizzbomb Posted April 7, 2020 Author Share Posted April 7, 2020 Tanker is responding, you are just a poor pilot. That may well be true, but your answer isnt particularly helpful or constructive. 1 Link to comment Share on other sites More sharing options...
Jizzbomb Posted April 7, 2020 Author Share Posted April 7, 2020 Here's what I've been doing....! Link to comment Share on other sites More sharing options...
=Panther= Posted April 7, 2020 Share Posted April 7, 2020 Are you entering the correct frequency for the tanker? Second, I don't know why but for some reason when entering a manual frequency, the frequency modulation the AM / FM tends to change at random. Twitch Channel [sIGPIC][/sIGPIC] Virtual Thunderbirds, LLC | Sponsored by Thrustmaster Z390 Aorus Xtreme, i9 9900k, G.SKILL TridentZ Series 32GB, 1080ti 11GB, Obutto R3Volution, Thrustmaster HOTAS Warthog, TPR, Cougar MFDs, FSSB R3L, JetSeat, Oculus Rift S, Buddy-Fox A-10C UFC, F/A-18C UFC, Tek Creations F-16 ICP Link to comment Share on other sites More sharing options...
RaisedByWolves Posted April 7, 2020 Share Posted April 7, 2020 How did they let your screename pass? DOn't get me wrong, I LOL'd Link to comment Share on other sites More sharing options...
oldcrusty Posted April 7, 2020 Share Posted April 7, 2020 How did they let your screename pass? DOn't get me wrong, I LOL'd :lol: This might explain VDV's response. Link to comment Share on other sites More sharing options...
Jizzbomb Posted April 7, 2020 Author Share Posted April 7, 2020 Radios set to the frequency in the briefing, tried COMM1 and COMM2... Link to comment Share on other sites More sharing options...
Greyman Posted April 7, 2020 Share Posted April 7, 2020 don't you need to press the ENT key, after selecting a frequency, to make it active? Link to comment Share on other sites More sharing options...
GPatricks Posted April 7, 2020 Share Posted April 7, 2020 Yeah, I can't even respond to him, what are you 12? Asus Z790-PLUS D4, Corsair 1000X PS / Intel i9-13900KF @5.8Gz - Corsair H150i Liquid CPU cooler, 64GB Corsair Vengeance DDR4 @3192mhz / 2TB M.2 NvMe Boot Drive (DCS World Beta installed here), 1TB M.2 Data drive, 1TB WD SATA drive, Zotac Gaming GeForce RTX 4090 Trinity 24GB - Nvidia 552.12 driver / 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz / Win11 Pro Ver. 23H2 - Build 22631.3447 TIR 5, TM Warthog HOTAS\VirPil stick base, MFG V3 Crosswind Pedals, TM MFDs on 2 8" Lilliputs/ Simgears ICP / Varjo Aero VR Link to comment Share on other sites More sharing options...
Greyman Posted April 7, 2020 Share Posted April 7, 2020 Yeah, I can't even respond to him, what are you 12? An interesting reply, although I'm not certain what prompted it? Have you had a bad day? Link to comment Share on other sites More sharing options...
BoneDust Posted April 7, 2020 Share Posted April 7, 2020 Are you entering the correct frequency for the tanker? Second, I don't know why but for some reason when entering a manual frequency, the frequency modulation the AM / FM tends to change at random. That could be because easy radio is turn on in your mission. Alienware New Aurora R15 | Windows® 11 Home Premium | 64bit, 13thGen Intel(R) Core(TM) i9 13900KF(24-Core, 68MB| NVIDIA(R) GeForce RTX(TM) 4090, 24GB GDDR6X | 1 X 2TB SSD, 1X 1TB SSD | 64GB, 2x32GB, DDR5, 4800MHz | 1350W PSU, Alienware Cryo-tech (TM) Edition CPU Liquid Cooling power supply | G2 Rverb VR Link to comment Share on other sites More sharing options...
vstolmech513 Posted April 7, 2020 Share Posted April 7, 2020 Is this a mission you created or someone else? Single player or multi player on a server? The briefing could be wrong compared to what is in the mission editor. If you have the ability to open the mission in the editor, click on the tanker and look to see what channel is selected for the tanker and also look in the advanced options for the waypoints and see if a different 'Set Frequency' task is set to a different freq. If it is a multi player server then the briefing is probably accurate and maybe you have a binding set wrong in your controls? Maybe delete the bind to the radios and reset them? Link to comment Share on other sites More sharing options...
Jizzbomb Posted April 7, 2020 Author Share Posted April 7, 2020 Its the ED Air to Air refueling mission that came with the jet. I've tried with both simple comms and without, neither seem to work! I've also just tried on another mission with a S3 present, it didnt work there either. Link to comment Share on other sites More sharing options...
randomTOTEN Posted April 7, 2020 Share Posted April 7, 2020 (edited) Here's what I've been doing....! I think you interrupt the dialogue by repeating the request too quickly. Wait 30 seconds before trying it again. ...I originally thought the error was using COMM2 instead of COMM1, so I loaded up the same mission. In the briefing, sure enough, it says to use COMM1 preset 1 (251mhz)to call for refueling. ...but to ED's credit, somebody actually play tested this!:joystick: Both radios are already set to 251.00mhz LOL :megalol: EDIT: You did try COMM1 at the end... strange. Try a repair? Edited April 7, 2020 by randomTOTEN Link to comment Share on other sites More sharing options...
=Panther= Posted April 7, 2020 Share Posted April 7, 2020 That could be because easy radio is turn on in your mission. Get the issue constantly on a dedicated realism server (no cheats on). Twitch Channel [sIGPIC][/sIGPIC] Virtual Thunderbirds, LLC | Sponsored by Thrustmaster Z390 Aorus Xtreme, i9 9900k, G.SKILL TridentZ Series 32GB, 1080ti 11GB, Obutto R3Volution, Thrustmaster HOTAS Warthog, TPR, Cougar MFDs, FSSB R3L, JetSeat, Oculus Rift S, Buddy-Fox A-10C UFC, F/A-18C UFC, Tek Creations F-16 ICP Link to comment Share on other sites More sharing options...
vstolmech513 Posted April 8, 2020 Share Posted April 8, 2020 Its the ED Air to Air refueling mission that came with the jet. I've tried with both simple comms and without, neither seem to work! I've also just tried on another mission with a S3 present, it didnt work there either. Not sure what the problem is, I just hopped on and requested rejoin on 251.000 and it worked just fine. Maybe run a repair? Link to comment Share on other sites More sharing options...
Larkis Posted April 8, 2020 Share Posted April 8, 2020 Did you use some mods or Scripts which may crash the tanker? Yesterday i do a refuel exercise on our private server. Dont run in problems there. Link to comment Share on other sites More sharing options...
BoneDust Posted April 8, 2020 Share Posted April 8, 2020 Get the issue constantly on a dedicated realism server (no cheats on). We get it occasionally. I don't really have an explanation why. We chock it down to poor net code. Sometimes radar will not detect targets; restarting and reconnecting fixes this. We also get issues where 3 people can call the tanker, while 4 people cannot. Its random and doesn't happen all the time. Hoping ED puts more effort towards the core sim including netcode. Alienware New Aurora R15 | Windows® 11 Home Premium | 64bit, 13thGen Intel(R) Core(TM) i9 13900KF(24-Core, 68MB| NVIDIA(R) GeForce RTX(TM) 4090, 24GB GDDR6X | 1 X 2TB SSD, 1X 1TB SSD | 64GB, 2x32GB, DDR5, 4800MHz | 1350W PSU, Alienware Cryo-tech (TM) Edition CPU Liquid Cooling power supply | G2 Rverb VR Link to comment Share on other sites More sharing options...
=Panther= Posted April 8, 2020 Share Posted April 8, 2020 Hoping ED puts more effort towards the core sim including netcode. Agreed 100%. Expanding is great but the base game is starting to struggle. Twitch Channel [sIGPIC][/sIGPIC] Virtual Thunderbirds, LLC | Sponsored by Thrustmaster Z390 Aorus Xtreme, i9 9900k, G.SKILL TridentZ Series 32GB, 1080ti 11GB, Obutto R3Volution, Thrustmaster HOTAS Warthog, TPR, Cougar MFDs, FSSB R3L, JetSeat, Oculus Rift S, Buddy-Fox A-10C UFC, F/A-18C UFC, Tek Creations F-16 ICP Link to comment Share on other sites More sharing options...
Notso Posted April 8, 2020 Share Posted April 8, 2020 Radios set to the frequency in the briefing, tried COMM1 and COMM2... What missions are you running? Perhaps the briefing freqs are not correct. I've seen that a few times. The best way is to go into ME and click on the tanker itself and then see what Freq it's set to over in the dialogue box on the right side. Whatever that freq is, that's what you want to set regardless of what the briefing says. Or change the tanker freq there to match the briefing if there is a mismatch. System HW: i9-9900K @5ghz, MSI 11GB RTX-2080-Ti Trio, G-Skill 32GB RAM, Reverb HMD, Steam VR, TM Warthog Hotas Stick & Throttle, TM F/A-18 Stick grip add-on, TM TFRP pedals. SW: 2.5.6 OB Link to comment Share on other sites More sharing options...
Jizzbomb Posted April 8, 2020 Author Share Posted April 8, 2020 Well folks, I really appreciate those that have tried to help & provide comment. I did a full uninstall and a reinstall (took 12 hours to download...!), tried exactly the same things in exactly the same way, and it worked first time. Go figure. No idea what it was, but again, thanks for trying to help! Link to comment Share on other sites More sharing options...
randomTOTEN Posted April 8, 2020 Share Posted April 8, 2020 Did you at least try running a repair first? Link to comment Share on other sites More sharing options...
Teamasian Posted July 27, 2020 Share Posted July 27, 2020 Tanker is responding, you are just a poor pilot. You are completely wrong. There are sometimes mistakes in the mission editor that makes the tanker frequency different from the frequency stated in a briefing or on a custom kneeboard. Please use that empty head of yours before you criticize people in that manner. 1 Link to comment Share on other sites More sharing options...
Recommended Posts