Eroxz564 Posted October 5, 2019 Share Posted October 5, 2019 Anyone else got the problem, aircraft wants to turn a litle left all the time ? [sIGPIC][/sIGPIC] :pilotfly: Link to comment Share on other sites More sharing options...
RAF_JAGUAR Posted October 5, 2019 Share Posted October 5, 2019 Same here, even clean wing. Anyone any idea why? I will say i am a little disappointed with the state of the early access F-16, the F-18 was a lot more finished on initial release. I like ED and their products but the F-16 has been released IMHO a little to early. How much longer, Ops? The engine’s overheating and so am I. We either stand down or blow up. Which do you want? :pilotfly::pilotfly::pilotfly: Link to comment Share on other sites More sharing options...
GPatricks Posted October 5, 2019 Share Posted October 5, 2019 The F-16 should pretty much be "in trim" all the time, for now (until X-EA goes to EA)I would use the manual trim to get her to fly straight, though I don't have this issue.. Asus Z790-PLUS D4, Corsair 1000X PS / Intel i9-13900KF @5.8Gz - Corsair H150i Liquid CPU cooler, 64GB Corsair Vengeance DDR4 @3192mhz / 2TB M.2 NvMe Boot Drive (DCS World Beta installed here), 1TB M.2 Data drive, 1TB WD SATA drive, Zotac Gaming GeForce RTX 4090 Trinity 24GB - Nvidia 552.12 driver / 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz / Win11 Pro Ver. 23H2 - Build 22631.3447 TIR 5, TM Warthog HOTAS\VirPil stick base, MFG V3 Crosswind Pedals, TM MFDs on 2 8" Lilliputs/ Simgears ICP / Varjo Aero VR Link to comment Share on other sites More sharing options...
Gdtrfb Posted October 5, 2019 Share Posted October 5, 2019 Having problem with nose wheel steering, rudder works but nose wheel doesn’t steer on ground, in real jet u arm that but don’t see that simulated. Anybody else? Link to comment Share on other sites More sharing options...
Kirkey_badgers Posted October 5, 2019 Share Posted October 5, 2019 Having problem with nose wheel steering, rudder works but nose wheel doesn’t steer on ground, in real jet u arm that but don’t see that simulated. Anybody else? Make sure you have the NWS MSL step button bound. It then illuminates to the right side of the HUD Link to comment Share on other sites More sharing options...
lucky-hendrix Posted October 5, 2019 Share Posted October 5, 2019 Did you press the NWS button ?? And btw this is completely unrelated to this thread Sent from my VTR-L09 using Tapatalk Link to comment Share on other sites More sharing options...
Grundar Posted October 5, 2019 Share Posted October 5, 2019 You need to press S to unlock the nose wheel and then you can steer via rudder inputs. I have to trim fairly frequently atm in flight, it's not to bad though Link to comment Share on other sites More sharing options...
Gdtrfb Posted October 5, 2019 Share Posted October 5, 2019 Thanks appreciate the replies Link to comment Share on other sites More sharing options...
dotChuckles Posted October 5, 2019 Share Posted October 5, 2019 Yup, having the exact same issue. Having to trim all the time. Thought the aircraft was supposed to be always "in trim". And usually it's always a left roll too. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
danny875 Posted October 5, 2019 Share Posted October 5, 2019 Me too, definitely rolls over time and the trim is too much to counter the roll. Link to comment Share on other sites More sharing options...
junneh Posted October 5, 2019 Share Posted October 5, 2019 I also have this mini roll issue, it is super hard to get the plane trimmed straight with ordnance. Always drifting a little bit. Link to comment Share on other sites More sharing options...
Eroxz564 Posted October 6, 2019 Author Share Posted October 6, 2019 Even clean config and still rolls left :P [sIGPIC][/sIGPIC] :pilotfly: Link to comment Share on other sites More sharing options...
Ziramond Posted October 6, 2019 Share Posted October 6, 2019 I have this same problem except it's a slight roll to the right. I am left handed though (fly normally though, stick in right hand, so not sure if this makes a difference). I have the warthog flight stick but I'm going to try adding a small deadzone to clear this up when I'm able to get on later. If anyone could test this in the meantime I would really appreciate it. Link to comment Share on other sites More sharing options...
Deano87 Posted October 6, 2019 Share Posted October 6, 2019 Completely clean jet with full fuel correct? Mine doesn't roll at all. Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again. Link to comment Share on other sites More sharing options...
Falconeer Posted October 6, 2019 Share Posted October 6, 2019 Anyone else got the problem, aircraft wants to turn a litle left all the time ? Yep me too, i havent done much testing with a clean jet, but its there when im loaded with 4 aim120s, 2 sidewinders and 2 fuel bags. Always rolling to the left and trim is too sensitive to counter the roll. I know its not my stick, since i dont have issues with other modules Planes: Choppers: Maps: Flaming Cliffs 3 Black Shark 2 Syria A-10C Tank killer 2 Black Shark 3 Persian Gulf F/A18C Hornet AH-64 Apache Mariana's F-16C Viper F-15E Strike Eagle Mirage 2000C AJS-37 Viggen JF-17 Thunder F-14 Tomcat Link to comment Share on other sites More sharing options...
Schmidtfire Posted October 6, 2019 Share Posted October 6, 2019 +1 rolls to the left Link to comment Share on other sites More sharing options...
wolle Posted October 6, 2019 Share Posted October 6, 2019 Yep me too, i havent done much testing with a clean jet, but its there when im loaded with 4 aim120s, 2 sidewinders and 2 fuel bags. Always rolling to the left and trim is too sensitive to counter the roll. I know its not my stick, since i dont have issues with other modules I have the same problem! [sIGPIC][/sIGPIC] Intel Core I7 4820K @4.3 GHz, Asus P9X79 motherboard, 16 GB RAM @ 933 MHz, NVidia GTX 1070 with 8 GB VRAM, Windows 10 Pro Link to comment Share on other sites More sharing options...
Deano87 Posted October 6, 2019 Share Posted October 6, 2019 Any chance this could be a weird crosswind bug like we had with the Hornet a while back? Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again. Link to comment Share on other sites More sharing options...
brp51d Posted October 6, 2019 Share Posted October 6, 2019 Same problem 1st rest rudder in axis comands Solved by pushing right rudder panel which reset rudder to center Link to comment Share on other sites More sharing options...
Frugo Posted October 6, 2019 Share Posted October 6, 2019 same problem here Link to comment Share on other sites More sharing options...
Deano87 Posted October 6, 2019 Share Posted October 6, 2019 Does it still happen if you have a small deadzone on the rudder? Proud owner of: PointCTRL VR : Finger Trackers for VR -- Real Simulator : FSSB R3L Force Sensing Stick. -- Deltasim : Force Sensor WH Slew Upgrade -- Mach3Ti Ring : Real Flown Mach 3 SR-71 Titanium, made into an amazing ring. My Fathers Aviation Memoirs: 50 Years of Flying Fun - From Hunter to Spitfire and back again. Link to comment Share on other sites More sharing options...
ED Team Wags Posted October 6, 2019 ED Team Share Posted October 6, 2019 (edited) Hey everyone, Please test with a clean aircraft or at least 100% symetrical payload (no TCTS pod o one wingtip and a CATM-9 on the other). With a clean aircraft, we cannot reproduce this. So, it may be a particuar store drag issue. Thanks Edited October 6, 2019 by Wags Youtube: https://www.youtube.com/user/wagmatt Twitch: wagmatt System: https://forums.eagle.ru/showthread.php?p=3729544#post3729544 Link to comment Share on other sites More sharing options...
Ziramond Posted October 6, 2019 Share Posted October 6, 2019 I have a deadzone set on my rudder and I get it, bit not pitch or roll which is my next test. Probably gonna check the trim as well Link to comment Share on other sites More sharing options...
SmoglessPanic Posted October 6, 2019 Share Posted October 6, 2019 Same here, even clean wing. Anyone any idea why? I will say i am a little disappointed with the state of the early access F-16, the F-18 was a lot more finished on initial release. I like ED and their products but the F-16 has been released IMHO a little to early. I noticed this happened to me when I changed the x/y axis for my rudder. It might have something to do with curves/axis. Just a guess though. Link to comment Share on other sites More sharing options...
Arbil Posted October 6, 2019 Share Posted October 6, 2019 Hey everyone, Please test with a clean aircraft or at least 100% symetrical payload (no TCTS pod o one wingtip and a CATM-9 on the other). With a clean aircraft, we cannot reproduce this. So, it may be a particuar store drag issue. Thanks Just did a quick test on the cauc map with hot start from parked jets. Had one f16 totally clean with 100% fuel and all the pylons that could be removed taken off. Took off and had no unwanted roll, all was good. Next jet I had loaded with stores but symmetrically(no TGP), 100% fuel. It did have a bit of unwanted left roll after take off, very subtle but it was there. It was 120c's on the tips, 9x's inboard, ter rack with 2 mk82's, and fuel bags. I had another jet loaded with GBUs and the tgp, so assymetrical(I was gonna try to get it trimmed but I guess that's another issue), but I didn't even test that one after the symmetrically loaded jet exhibited the left roll. Let me know if there's anything else I can do to help. Link to comment Share on other sites More sharing options...
Recommended Posts