Direwolf Posted April 25, 2021 Share Posted April 25, 2021 First of all, congratulations! We´re having a streak of very well conceived and built mods lately. Your plane is gorgeous! One single question: the plane is constantly moving in idle condition, and I need to keep brakes applied all the time (until is time to move, of course). Is this behavior normal? 2 Link to comment Share on other sites More sharing options...
Doc3908 Posted April 25, 2021 Share Posted April 25, 2021 4 minutes ago, Direwolf said: First of all, congratulations! We´re having a streak of very well conceived and built mods lately. Your plane is gorgeous! One single question: the plane is constantly moving in idle condition, and I need to keep brakes applied all the time (until is time to move, of course). Is this behavior normal? I noticed that, too. I use the emergency break to avoid having to press the toe brakes all the time. But I'm curious if this is a normal aircraft behavior in RL. Somehow I doubt that little engine will be able to move the airframe at idle. Link to comment Share on other sites More sharing options...
FZG_Immel Posted April 25, 2021 Share Posted April 25, 2021 13 hours ago, sobe said: I am trying to run the plane with two screens with the second screen displaying the 2 MFDs and I have two questions. The right MFDR displays on my second screen but the left MFDL will not do so. I use the following command in the MFDL init.lua file dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("VANO_45T_LEFT_MFCD") Is this my error? Second, while I programmed the MFD buttons in the game controls to match the buttons on my TM Cougar MFDs, my TM Cougar MFD buttons do not change the in game display. However, both the in game display and the display on my second screen do change if I click on a button on the game MFD. Is that the current status? where do you find the MFDL init.lua file ? [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
HC_Official Posted April 25, 2021 Share Posted April 25, 2021 Am I missing something? I do not see a link to download this on the first post ? No more pre-orders Click here for tutorials for using Virpil Hardware and Software Click here for Virpil Flight equipment dimensions and pictures. . Link to comment Share on other sites More sharing options...
=4c=Nikola Posted April 25, 2021 Share Posted April 25, 2021 What does "Civil plane" checkbox located in payload menu do? Do not expect fairness. The times of chivalry and fair competition are long gone. Link to comment Share on other sites More sharing options...
FZG_Immel Posted April 25, 2021 Share Posted April 25, 2021 (edited) made a new loading image image for the T-45 theme goes into \Saved Games\DCS.openbeta\Mods\Aircraft\VNAO_T45\Theme\ME name loading-window.png Edited April 25, 2021 by FZG_Immel 6 [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
jjl9999 Posted April 25, 2021 Share Posted April 25, 2021 39 minutes ago, FZG_Immel said: where do you find the MFDL init.lua file ? Works for me. As I believe that you already have your 2nd screen setup for LEFT_MFCD and RIGHT_MFCD like me, I just reused these definitions by adding: - into: Cockpit\Scripts\Displays\MFDL\Indicator\initi.lua I added: dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("LEFT_MFCD") - into: Cockpit\Scripts\Displays\MFDR\Indicator\initi.lua I added: dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("RIGHT_MFCD") Link to comment Share on other sites More sharing options...
FZG_Immel Posted April 25, 2021 Share Posted April 25, 2021 (edited) 2 hours ago, jjl9999 said: Works for me. As I believe that you already have your 2nd screen setup for LEFT_MFCD and RIGHT_MFCD like me, I just reused these definitions by adding: - into: Cockpit\Scripts\Displays\MFDL\Indicator\initi.lua I added: dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("LEFT_MFCD") - into: Cockpit\Scripts\Displays\MFDR\Indicator\initi.lua I added: dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("RIGHT_MFCD") doest work for me. Can you show me WHERE you put it in the init.lua ? EDIT: got it working by adding it at the end !!! THANKS !!! Edited April 25, 2021 by FZG_Immel 1 [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
VR Flight Guy in PJ Pants Posted April 25, 2021 Share Posted April 25, 2021 1 hour ago, MAXsenna said: Did you make sure engine switch goes back to ON from START, and then use the fingerlifts? Also make sure your throttle is set as a slider. Hope this helps! Cheers! Let me try again. Thanks. 1 VR Flight Guy in PJ Pants -- this is how I fly. We do not fly at treetop height, we fly between trees(TM) YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA My simple missions: https://forum.dcs.world/topic/284071-vr-flight-guy-in-pj-pants-simple-missions/ NSRI - National Strategy Research Institution, a fictional organisation based on wordplay of Strategic Naval Research Institution (SNRI), a fictional institution appears in Mobile Suit Gundam UC timeline. Link to comment Share on other sites More sharing options...
Flipper Posted April 25, 2021 Share Posted April 25, 2021 Quote 31 minutes ago, FZG_Immel said: doest work for me. Can you show me WHERE you put it in the init.lua ? EDIT: got it working by adding it at the end !!! THANKS !!! I´m working on my .lua for two extern screens - but I can´t get it to work! Can you explain in a detail way how you do it? “The uninitiated non-believers think an airplane is a collection of moving parts and miles of wiring. We know better.” Marshall “War Dog” Lefavor [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Bishop_DE Posted April 25, 2021 Share Posted April 25, 2021 (edited) The fonts on the MFDs is somehow broken. Perhaps this is already known. I wanted to share this with you. Edited April 25, 2021 by Bishop_DE Rechner: AMD 2700X, 32GB RAM, 2x SSD (500Gb u. 128Gb), Warthog Joystick, Rift S, GTX 1080, Monstertech Flightstand Link to comment Share on other sites More sharing options...
FZG_Immel Posted April 25, 2021 Share Posted April 25, 2021 2 hours ago, Flipper said: I´m working on my .lua for two extern screens - but I can´t get it to work! Can you explain in a detail way how you do it? first question is.. Do you already have external MFD's working on another airplane ? Like the F/A-18C or the F-16C ? because the explanations are going to be much longer if you dont. If you already have some working, and that your MonitorSetup file already includes that, its going to be easier 2 hours ago, Bishop_DE said: The fonts on the MFDs is somehow broken. Perhaps this is already known. I wanted to share this with you. I agree, the fonts are a bit strange, and also the right column of the MFD's is a bit off screen [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
Flipper Posted April 25, 2021 Share Posted April 25, 2021 (edited) Quote 8 minutes ago, FZG_Immel said: first question is.. Do you already have external MFD's working on another airplane ? Like the F/A-18C or the F-16C ? because the explanations are going to be much longer if you dont. If you already have some working, and that your MonitorSetup file already includes that, its going to be easier Yes, I have - this is my very well working .lua for the hornet: Thanks for reply! Edited April 25, 2021 by Flipper “The uninitiated non-believers think an airplane is a collection of moving parts and miles of wiring. We know better.” Marshall “War Dog” Lefavor [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
razo+r Posted April 25, 2021 Share Posted April 25, 2021 2 hours ago, PhilTheBeat said: Hello everyone and first of all thank you for this FREE module . I have a question. I think i´ve set everything in the right way. I want it to try it using the mission editor i set the plane as "client", i can choose in the slot windows but once on the tarmac the AI control it. Am i missing something? Thanks. You selected the wrong plane... 1 Link to comment Share on other sites More sharing options...
sobe Posted April 25, 2021 Share Posted April 25, 2021 FZG_Immel I assume that you got both MFDs to display on your second screen. I will try again later. Perhaps I have just made a typo somewhere. Do you have Cougar MFDs and if so did you try to program the buttons to work in game? Again I could not get that to work. Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 . Link to comment Share on other sites More sharing options...
Mizzy Posted April 25, 2021 Share Posted April 25, 2021 This is absolutely brilliant, unfortunately the aircraft crashes when taking off from Nellis as soon as the gear goes up. This should be an official module. Mizzy Link to comment Share on other sites More sharing options...
FZG_Immel Posted April 25, 2021 Share Posted April 25, 2021 2 hours ago, sobe said: FZG_Immel I assume that you got both MFDs to display on your second screen. I will try again later. Perhaps I have just made a typo somewhere. Do you have Cougar MFDs and if so did you try to program the buttons to work in game? Again I could not get that to work. yes to both [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
FZG_Immel Posted April 25, 2021 Share Posted April 25, 2021 (edited) Ok, so this is what I did : first I created two new entries in my MonitorSetup file ((modify the file you currently use in DCS; but make a back up copy of said file first) that you can find here : \Eagle Dynamics\DCS World OpenBeta\Config\MonitorSetup here are the entries for the monitorsetup file that must be added. Quote MFDL = { x = 3963.0; y = 258.0; width = 383; height = 390; } MFDR = { x = 5232.0; y = 258.0; width = 383; height = 390; } for coordinates and sizes, you can initially copy those that you already use for the other exports you have there, but you will need then need to finetune them, because for this airplane these exports need to be a little smaller, to fit the Cougar MFD's... for reference, here are the lines I use for the hornet, for example. You can see the difference (up there the sizes are smaller compared to the one I created for the Goshawk) Quote LEFT_MFCD = { x = 3953.0; y = 248.0; width = 406; height = 406; } RIGHT_MFCD = { x = 5222.0; y = 248.0; width = 406; height = 406; } CENTER_MFCD = { x = 4585.0; y = 438.0; width = 406; height = 406; } then, you need to add the following lines to your MFDR init.lua file that you can find here (add it at the VERY END of the file): \Saved Games\DCS.openbeta\Mods\Aircraft\VNAO_T45\Cockpit\Scripts\Displays\MFDR\Indicator Quote ------------------------ added by Capt Zeen dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("MFDR") ------------------------------------- end of added by Capt Zeen then, you need to add the following lines to your MFDL init.lua file that you can find here (add it at the VERY END of the file) : \Saved Games\DCS.openbeta\Mods\Aircraft\VNAO_T45\Cockpit\Scripts\Displays\MFDL\Indicator Quote ------------------------ added by Capt Zeen dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("MFDL") ------------------------------------- end of added by Capt Zeen for reference, here is how the complete init.lua file looks like (with the addition put in bold). Quote dofile(LockOn_Options.common_script_path.."devices_defs.lua") indicator_type = indicator_types.COMMON init_pageID = 1 purposes = {render_purpose.GENERAL,render_purpose.HUD_ONLY_VIEW} --subset ids BASE = 1 MENU = 2 STORES = 3 HSI = 4 ADI = 5 ENGINE = 6 DATA = 7 HUD = 8 ACFT = 9 GPS = 10 BIT = 11 page_subsets = { [BASE] = LockOn_Options.script_path.."Displays/MFDL/Indicator/base_page.lua", [MENU] = LockOn_Options.script_path.."Displays/MFDL/Indicator/menu_page.lua", [STORES] = LockOn_Options.script_path.."Displays/MFDL/Indicator/stores_page.lua", [HSI] = LockOn_Options.script_path.."Displays/MFDL/Indicator/hsi_page.lua", [ADI] = LockOn_Options.script_path.."Displays/MFDL/Indicator/adi_page.lua", [ENGINE] = LockOn_Options.script_path.."Displays/MFDL/Indicator/eng_page.lua", [DATA] = LockOn_Options.script_path.."Displays/MFDL/Indicator/data_page.lua", [ACFT] = LockOn_Options.script_path.."Displays/MFDL/Indicator/acft_page.lua", [GPS] = LockOn_Options.script_path.."Displays/MFDL/Indicator/gps_page.lua", [HUD] = LockOn_Options.script_path.."Displays/MFDL/Indicator/hud_page.lua", } pages ={{BASE,MENU,STORES,HSI,ADI,ENGINE,DATA,ACFT,GPS,HUD},} ------------------------ added by Capt Zeen dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("MFDL") ------------------------------------- end of added by Capt Zeen there you go. this should work. works for me perfectly Edited April 25, 2021 by FZG_Immel 1 [sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC] Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - EVGA 3090 - Cougar FSSB + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedal + WinWing MIP + Orion + TO and CO pannels - Track IR5 Link to comment Share on other sites More sharing options...
Nodak Posted April 25, 2021 Share Posted April 25, 2021 Thanks to the guys earlier in the thread, updated SRS and now working great. Outstanding job on the jet, feels great in the pattern. Link to comment Share on other sites More sharing options...
sobe Posted April 25, 2021 Share Posted April 25, 2021 FZG_Immel I gave up trying to find my typos so I just copied your viewport and init.lua changes and it works. As for the MFD buttons, I had assigned the right mfd to my 3rd Cougar MFD. Perhaps that was the error so I changed it to Cougar MFD #2 and now everything works. That is the joy of DCS. Trying to unravel mysteries. Just when you think you know everything, something crazy happens. 1 Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 . Link to comment Share on other sites More sharing options...
sobe Posted April 25, 2021 Share Posted April 25, 2021 FZG_Immel Now if I can only figure out how to get the UFC to work in Helios. Right now I don't believe that is possible as there are no key commands and using the generic interface is to complicated. 1 Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 . Link to comment Share on other sites More sharing options...
Pappy2 Posted April 25, 2021 Share Posted April 25, 2021 Once again great plane, thanks to the developers 4 Link to comment Share on other sites More sharing options...
PhilTheBeat Posted April 25, 2021 Share Posted April 25, 2021 4 hours ago, PhilTheBeat said: Hello everyone and first of all thank you for this FREE module . I have a question. I think i´ve set everything in the right way. I want it to try it using the mission editor i set the plane as "client", i can choose in the slot windows but once on the tarmac the AI control it. Am i missing something? Thanks. I saw that i don´t have the possibility in the list menu to choose "player" and the Hawk is greyed , not yellow. Any help will be welcome. I7 4770K / 1080 TI / 16GB RAM / VR Q2 / 3X IIYAMA 27 / T.16000M FCS TWCS / TRACK IR PRO A-10C II / F/A18 C / F-14 / F16-C / M-2000C / F-86F Sabre / C-101 / SPITFIRE LF / P-51D / FW 190 D-9 / FW 190 A-B / Bf 109 K-4 CHRISTEN EAGLE II / YAK-52 / UH-1H Huey / SA 342 CHANNEL MAP / NEVADA / NORMANDY / PERSIAN / SYRIA / SUPERCARRIER / TAKE OFF FRANCE.FR Link to comment Share on other sites More sharing options...
razo+r Posted April 25, 2021 Share Posted April 25, 2021 (edited) 2 minutes ago, PhilTheBeat said: I saw that i don´t have the possibility in the list menu to choose "player" and the Hawk is greyed , not yellow. Any help will be welcome. As I said, you are searching for the wrong aircraft. If you want to fly the Hawk, you have to look here: https://www.digitalcombatsimulator.com/en/shop/modules/hawk_dcs_world/ Search for T-45 instead. Edited April 25, 2021 by razo+r 2 Link to comment Share on other sites More sharing options...
PhilTheBeat Posted April 25, 2021 Share Posted April 25, 2021 6 minutes ago, razo+r said: As I said, you are searching for the wrong aircraft. If you want to fly the Hawk, you have to look here: https://www.digitalcombatsimulator.com/en/shop/modules/hawk_dcs_world/ Search for T-45 instead. Thanks.....Correct my bad.... I7 4770K / 1080 TI / 16GB RAM / VR Q2 / 3X IIYAMA 27 / T.16000M FCS TWCS / TRACK IR PRO A-10C II / F/A18 C / F-14 / F16-C / M-2000C / F-86F Sabre / C-101 / SPITFIRE LF / P-51D / FW 190 D-9 / FW 190 A-B / Bf 109 K-4 CHRISTEN EAGLE II / YAK-52 / UH-1H Huey / SA 342 CHANNEL MAP / NEVADA / NORMANDY / PERSIAN / SYRIA / SUPERCARRIER / TAKE OFF FRANCE.FR Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now