TM Cougar & CH magnetoresistive/ hall sensor kits

[sirrah]

6 hours ago, rel4y said:

The delivery of new 3D printed casings should arrive end of this week. While so far I have always ordered from Shapeways, I have lately been dissatisfied with them and now pulled the trigger over at i.materialise. I really, really hope the SLS prints are good quality and up to spec. If all goes well I can offer these for the Cougar soon:

 

 

 

Excuse my ignorance, but what Cougar part am I looking at here? (Range Knob?)

[washiestsnake]

Hi I was wondering do you still sell your 24bit boards? Do you have any tutorials on wiring them up? I am currently making a joystick thats all custom using a rotory switch like a F-14 and am wondering how I can make this board work with the planned components.

 

I also saw you needed the measurements for the Warthog Base. I found on Thingiverse a CAD file of the base, Ill post it here, and hopefully from that you can design the spring and the rest! Thing files for V2.0 Thrustmaster Warthog replacement gimbal by Psyrg - Thingiverse

Edited January 21 by washiestsnake

[rel4y]

On 1/19/2021 at 7:39 AM, sirrah said:

Excuse my ignorance, but what Cougar part am I looking at here? (Range Knob?)

 

This is the Cougar ANT ELEV sensor. It should also fit the F-16 TQS.

 

23 hours ago, washiestsnake said:

Hi I was wondering do you still sell your 24bit boards? Do you have any tutorials on wiring them up? I am currently making a joystick thats all custom using a rotory switch like a F-14 and am wondering how I can make this board work with the planned components.

 

I also saw you needed the measurements for the Warthog Base. I found on Thingiverse a CAD file of the base, Ill post it here, and hopefully from that you can design the spring and the rest! Thing files for V2.0 Thrustmaster Warthog replacement gimbal by Psyrg - Thingiverse

 

 

Yes, I am still selling them. You can find my email in the first post. I have a few pictures detailing which pin does what, but no conclusive tutorial so far.

 

Just finished modeling the Warthog hatswitches with a few internal improvements. Now I plan to combine the best of the CH hats with the best of the Warthog ones and integrate them into the OTTO footprints.

 

 

Btw, does anybody know how to safely disassemble the Warthog OTTO P1 style push buttons?

 

Edited January 22 by rel4y

[rel4y]

The new i.materialise prints have arrived and I am veeery pleased with the quality! Here is a nice SLS print of the F-16 TM 13 deg tailpiece, FCC thread piece and F-16 locking collar and they fit together like a charm! They are ready for full metal production now. Next, I will install the 13 deg tailpiece and F-16 locking collar on my Warthog or Cougar grip to see if it looks cool.

 

 

 

Over the weekend I was busy making new CH sensors and CH mainbaords and finally I am done.. Geez, I can barely see through the solder fumes in my room and my back needs to be bent straight again. Anyways, I am taking new orders for the CH stuff now. The Cougar USB standalone adapters + GMR sensors and the Cougar Mnistick are also back in stock.

 

 

stock items:

1x Cougar Stick sensors (42€)

5x Cougar USB Throttle adapter + 14 GMR sensor (30€ + 20€)

0x Cougar Throttle hall sensor (22€)

10x Cougar Ministick (22€)

20x CH sensor (22€)

5x 12 Bit CH upgrade mainboard (30€)

10x 4021 shift registers (10€)

Edited January 25 by rel4y

[Sokol1_br]

On 1/21/2021 at 9:49 PM, rel4y said:

Btw, does anybody know how to safely disassemble the Warthog OTTO P1 style push buttons?

 

This pictures suggest that need press the side tabs, for release the bottom with the membrane switch. Tm button at left (OTTO P-1xxx at right).

 

 

[Dispatch]

On 1/18/2021 at 7:36 PM, rel4y said:

The delivery of new 3D printed casings should arrive end of this week. While so far I have always ordered from Shapeways, I have lately been dissatisfied with them and now pulled the trigger over at i.materialise. I really, really hope the SLS prints are good quality and up to spec. If all goes well I can offer these for the Cougar soon:

 

 

 

Hello this looks great..., does it have the center stop?

 

[Dispatch]

On 1/28/2021 at 2:30 PM, Dispatch said:

Hello this Cougar ANT ELEV sensor , looks great..., does it have the center detent?

 

 

Edited February 13 by Dispatch

[Lace]

Hi @rel4y,

 

I emailed you last week about the Cougar USB mod - just wondering if you are still selling these?

[unhappytroll]

question - does your CH sensor compatible with old TM F-16 FLCS gimbal?

[rel4y]

On 1/28/2021 at 8:30 PM, Dispatch said:

Hello this looks great..., does it have the center stop?

 

 

Yes, but its not very pronounced. I have the cases laying around (still missing their bearings and threads), but the PCBs got hung up somewhere in the mail..

 

 

On 2/17/2021 at 10:03 AM, Lace said:

Hi @rel4y,

 

I emailed you last week about the Cougar USB mod - just wondering if you are still selling these?

 

Answered!

 

On 2/22/2021 at 7:24 PM, unhappytroll said:

question - does your CH sensor compatible with old TM F-16 FLCS gimbal?

 

Well, it does fit in the TM F-22 Pro and F-16 TQS. Have a look here: https://forums.eagle.ru/topic/188571-tm-cougar-ch-magnetoresistive-hall-sensor-kits/?do=findComment&comment=4415482

 

 

 

I also have made a small new batch of mods.

 

stock items:

1x Cougar Stick sensors (42€)

5x Cougar USB Throttle adapter + 14 GMR sensor (30€ + 20€)

2x Cougar Throttle hall sensor (22€)

5x Cougar Ministick (22€)

8x CH sensor (22€)

3x 12 Bit CH upgrade mainboard (30€)

10x 4021 shift registers (10€)

 

Edited Saturday at 02:52 AM by rel4y

[Mudspike]

Hi

Planning on using Cougar standalone throttle with Warthog stick for BMS.

Can you advise how I should set up throttle in Windows 10 in order to use microstick?

Can I set up standalone throttle using Hotas Cougar Control Panel without Cougar stick base?

Just wondered how it works.

Thanks

[Dudikoff]

20 hours ago, Mudspike said:

Planning on using Cougar standalone throttle with Warthog stick for BMS.

Can you advise how I should set up throttle in Windows 10 in order to use microstick?

Can I set up standalone throttle using Hotas Cougar Control Panel without Cougar stick base?

Just wondered how it works.

 

The controller board is in the stick base so it has to be connected to it to work (unless you buy the TUSBA adapter which IMHO would be a waste of money since you can just put the connected stick base somewhere out of the way).

 

There are updated Cougar drivers and they work on Windows 10, including the CCP.

 

Thus, the microstick works as well though you might need to disable the rudder axis in CCP (enabled by default IIRC for some reason) and enable the microstick ones. I remember I also remapped the microstick axis to some Direct X ones within Target scripts for it to work, but don't recall exactly why as I mostly use the Warthog throttle with the Cougar base these days.

Edited 14 hours ago by Dudikoff

[Cyberadje]

Hi Mudspike,

 

I am using the same combo as you are planning to use. I can tell you it works like a charm. The throttle is setup through Mjoy software and is programmable through DCS or BMS. The hardware install is pretty straight forward and is not that hard. i'm no tech wonder myself.

 

Good luck

 

[Mudspike]

Hi Cyberdje

 

Thank you for your advice.

So, Does Rel4y's standalone kit ship with set up software "Mjoy" ? or is this any sort of 3rd party software that I have to download?

 

Thanks

[Mudspike]

24 minutes ago, Cyberadje said:

Hi Mudspike,

 

I am using the same combo as you are planning to use. I can tell you it works like a charm. The throttle is setup through Mjoy software and is programmable through DCS or BMS. The hardware install is pretty straight forward and is not that hard. i'm no tech wonder myself.

 

Good luck

 

 

2 hours ago, Dudikoff said:

 

The controller board is in the stick base so it has to be connected to it to work (unless you buy the TUSBA adapter which IMHO would be a waste of money since you can just put the connected stick base somewhere out of the way).

 

There are updated Cougar drivers and they work on Windows 10, including the CCP.

 

Thus, the microstick works as well though you might need to disable the rudder axis in CCP (enabled by default IIRC for some reason) and enable the microstick ones. I remember I also remapped the microstick axis to some Direct X ones within Target scripts for it to work, but don't recall exactly why as I mostly use the Warthog throttle with the Cougar base these days.

 

sorry, I was not clear.

I am going to get rel4y's  standalone throttle adaptor and my question was based upon it.

I knew I cannot use cougar software with this standalone adapter thus wondered how I should set things up which were partially answer by Cyberdje

[Mudspike]

1 hour ago, Mudspike said:

Hi Cyberdje

 

Thank you for your advice.

So, Does Rel4y's standalone kit ship with set up software "Mjoy" ? or is this any sort of 3rd party software that I have to download?

 

Thanks

Just got set up files and instruction directly from rel4y.

Can't wait to give this a try when it gets here ..

[Cyberadje]

5 hours ago, Mudspike said:

Just got set up files and instruction directly from rel4y.

Can't wait to give this a try when it gets here ..

Great, good luck and happy flying.

[Tazman]

5 hours ago, Mudspike said:

Just got set up files and instruction directly from rel4y.

Can't wait to give this a try when it gets here ..

Let us know how it goes!