HipoxiK Posted January 9 Share Posted January 9 I have pre-orded and can't wait to get a set of these. I'm sick of having to pick up a VR controller to click around the cockpit then put it back down. Would it be posible to add/sync the DCS VR hand models to these devices? I can imagine the immersion being better again if your hand is moving around the cockpit as it does when using VR controllers in DCS. Cheers and thanks for this amazing piece of tech. Link to post Share on other sites
Wakkaman Posted January 20 Share Posted January 20 (edited) Anybody tried this with MSFS 2020? I am curious how the pointing device interacts? Edited January 20 by Wakkaman Link to post Share on other sites
Lt_Jaeger Posted January 20 Share Posted January 20 Doesn't work just yet, if I read it right in the discord, but if I understood it right, @MilesDwants to do some research on that matter. I might be off, though. Link to post Share on other sites
DutchCoolHand Posted January 20 Share Posted January 20 Can confirm it does not work yet. not Miles fault. the mouse works weird in MSFS2020 AMD RYZEN 7 2700 / 32GB / RTX2070 / 500GB M.2 with Windows and DCS / 2 - 500GB SSD / Rift S/ TM Warthog with F18 stick and Virpil WarBRD / Foxx Mounts/ MFG Crosswind rudders + 3 MFD's | Now enjoying VR with PointCTRL controllers + Gamematrix JetSeat Link to post Share on other sites
Wakkaman Posted January 21 Share Posted January 21 Thnks for the reply. Let's hope in the future. Link to post Share on other sites
Ala12Rv-Tundra Posted January 21 Share Posted January 21 On 1/9/2021 at 10:51 AM, HipoxiK said: I have pre-orded and can't wait to get a set of these. I'm sick of having to pick up a VR controller to click around the cockpit then put it back down. Would it be posible to add/sync the DCS VR hand models to these devices? I can imagine the immersion being better again if your hand is moving around the cockpit as it does when using VR controllers in DCS. Cheers and thanks for this amazing piece of tech. That would be nice. Can't wait either i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | Virpil desk mount | VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 3 TM MFDs | Realteus ForceFeel | 2x bass shakers FC3 - Warthog - F-5E - Harrier - Hornet - Tomcat - Huey - Viper - C-101 - NTTR - PG - Mi8 - SuperCarrier - Syria - Warthog II Link to post Share on other sites
DutchCoolHand Posted January 21 Share Posted January 21 16 minutes ago, Ala12Rv-Tundra said: That would be nice. Can't wait either there are user of this that put up a board to have the tactile feedback. I dont need it, to me this feels real. will it get better in the future? I am certain and so says Miles AMD RYZEN 7 2700 / 32GB / RTX2070 / 500GB M.2 with Windows and DCS / 2 - 500GB SSD / Rift S/ TM Warthog with F18 stick and Virpil WarBRD / Foxx Mounts/ MFG Crosswind rudders + 3 MFD's | Now enjoying VR with PointCTRL controllers + Gamematrix JetSeat Link to post Share on other sites
RogueSqdn Posted January 22 Share Posted January 22 I tried that about a year ago and found it to be more trouble than it’s worth. YMMVSent from my iPhone using Tapatalk Pro DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to post Share on other sites
RumSponge Posted January 27 Share Posted January 27 And to think I nearly pulled the trigger on a pair of Capto gloves before I saw this. I really don't mind a bit of wait if it means I will finally be able to tune the radios in the A10. Link to post Share on other sites
Ratcatcher Posted January 27 Share Posted January 27 4 hours ago, RumSponge said: And to think I nearly pulled the trigger on a pair of Capto gloves before I saw this. I really don't mind a bit of wait if it means I will finally be able to tune the radios in the A10. You won't be disappointed! I recently had my PC out of action for a good couple of months (before Miles came to the rescue!). Getting them back on makes it feel so natural to point at and manipulate controls in the cockpit again. I really couldn't imagine flying without them and am really looking forward to the V2 FPU's. While they are not perfect (what is?), Miles always stated that they would be an interim solution to the problem of interaction in VR, well it's been a good few years now and I have yet to see anything equal, let alone surpass the functionality these bring to the party! Techlabs Chameleon Watercooled Gaming PC - Intel Core i7 6700K @ 4.7GHz : Samsung 950 Pro 256GB SSD, Samsung 500 gig SSD, Seagate 1TB 7200RPM Drive : MSI GeForce GTX 1080 "Founders Edition" 8192MB : 800W '80 Plus Gold' Modular Power Supply : 32GB (2x16GB) DDR4 PC4-25600C16 3200MHz : Occulus Rift S : TM Warthog : MFG Crosswind V2 : Win 10 64. PointCTRL. Link to post Share on other sites
Avalon66 Posted February 1 Share Posted February 1 Hi Miles I’d be interested to mount the system into psvr helmet. Which kind of mounting option should I choose? thanks Link to post Share on other sites
MilesD Posted February 1 Author Share Posted February 1 4 hours ago, Avalon66 said: Hi Miles I’d be interested to mount the system into psvr helmet. Which kind of mounting option should I choose? thanks Hmm... That's a first request, I will have a look at it. Now Shipping 1 thru 425 for current production version 1 PointCTRL General Information Post https://forums.eagle.ru/showpost.php...54&postcount=1 PreOrder Wait List Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/ Link to post Share on other sites
MilesD Posted February 1 Author Share Posted February 1 (edited) PointCTRL v2 to being shipping this week. We will start slow with production prototypes, if feedback is positive and nothing pops up from the users, we will increase production every week The HMS is the same form factor as v1, but has an added stress relief in the micro USB connector. We were not getting 100% reliability out of the new micro-controllers. There is no performance or feature gain with the new cortex processor. They were just going to be easier for us to manufacture. The original form factor actually works better for all VR headsets except the Index. If you have an Index, you can wait until we offer both form factors if you like. Pics of the index can be seen in the HMS pics channel on the Discord. Thanks again for all of your support patience, we truly appreciate it. Miles Edited February 1 by MilesD 1 Now Shipping 1 thru 425 for current production version 1 PointCTRL General Information Post https://forums.eagle.ru/showpost.php...54&postcount=1 PreOrder Wait List Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/ Link to post Share on other sites
speed-of-heat Posted February 1 Share Posted February 1 This is going to sound like a daft question, but how much does rely on line of sight to the hand controllers from the headset unit, I ask, because my setup forces my hands below my desk (space constraints) where my controllers are mounted? SYSTEM SPECS: Hardware Intel Corei7-9700K @ 5.1 GHz, 32Gb RAM, EVGA 3090 XC3, Dell S2716DG, Thrustmaster Warthog + MFG Crosswinds V2, HP Reverb G2 @ 2836 x 2768 SOFTWARE: Microsoft Windows 10 Pro x64, VoiceAttack & VIACOM PRO, TacView VR Stuff: My Settings for 3090 and G2 My Settings for 1080ti Shaders MOD for VR My variant of Kegetys mod with clear water and also IC PASS for current beta & stable, Patch Status Link to post Share on other sites
RogueSqdn Posted February 1 Share Posted February 1 Looking forward to it, Miles!PMed you on Discord. Sent from my iPhone using Tapatalk Pro DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to post Share on other sites
EvoMayhem Posted February 1 Share Posted February 1 Well, I've finally pulled the trigger and ordered a set. Looking forward to receiving it. I'll join the Discord also. Link to post Share on other sites
Sr. Posted February 1 Share Posted February 1 How do we tell where we are in the pre-order line? AMD Ryzen R9 3900X | 64GB DDR4 3600| NVidia 1080 Ti | Samsung 970 Evo 1TB NVME | Vive Cosmos Elite | Logitech X-56 throttle/VKB NXT stick Link to post Share on other sites
dburne Posted February 1 Share Posted February 1 OK so now that I know I will be continuing to use DCS after getting through much of my learning curve with the Hornet, and obviously these finger trackers have been doing quite well, I have finally placed my pre-order. Looking forward to this! Don B My VKB Gunfighter MK III Pro L Review EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler | Samsung 970 Pro, 970 Evo 1TB m.2 Nvme |VKB GF MK III Pro L Ultimate Grip| Virpil CM3 Throttle |Reverb G2 | Link to post Share on other sites
Drac Posted February 1 Share Posted February 1 27 minutes ago, dburne said: OK so now that I know I will be continuing to use DCS after getting through much of my learning curve with the Hornet, and obviously these finger trackers have been doing quite well, I have finally placed my pre-order. Looking forward to this! You will definitely enjoy using them. I have V1 and may pre-order V2 as they are a little smaller. Link to post Share on other sites
dburne Posted February 1 Share Posted February 1 58 minutes ago, Drac said: You will definitely enjoy using them. I have V1 and may pre-order V2 as they are a little smaller. So I just pre-ordered today, I assume I will be getting V2? Don B My VKB Gunfighter MK III Pro L Review EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler | Samsung 970 Pro, 970 Evo 1TB m.2 Nvme |VKB GF MK III Pro L Ultimate Grip| Virpil CM3 Throttle |Reverb G2 | Link to post Share on other sites
Drac Posted February 1 Share Posted February 1 42 minutes ago, dburne said: So I just pre-ordered today, I assume I will be getting V2? Yes...you will be getting the V2 unless you specifically ask for the V1. Link to post Share on other sites
dburne Posted February 1 Share Posted February 1 21 minutes ago, Drac said: Yes...you will be getting the V2 unless you specifically ask for the V1. Sounds good thanks. Don B My VKB Gunfighter MK III Pro L Review EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 | Corsair H150i Pro Cooler | Samsung 970 Pro, 970 Evo 1TB m.2 Nvme |VKB GF MK III Pro L Ultimate Grip| Virpil CM3 Throttle |Reverb G2 | Link to post Share on other sites
nessuno0505 Posted February 1 Share Posted February 1 (edited) Preordered from the site back in december, can't wait. P.S. why does it not work with fs2020? Isn't it just a mouse? If you can use a regular mouse, you should be able to use this... why not? Edited February 1 by nessuno0505 Link to post Share on other sites
Drac Posted February 1 Share Posted February 1 28 minutes ago, nessuno0505 said: Preordered from the site back in december, can't wait. P.S. why does it not work with fs2020? Isn't it just a mouse? If you can use a regular mouse, you should be able to use this... why not? Miles discussed here. Link to post Share on other sites
nessuno0505 Posted February 2 Share Posted February 2 Miles deals with x-plane, and to be honest the VR mouse in x-plane sucks even if you use It with a traditional mouse. Nevertheless, since dcs is my main simulator (with a bit of il-2 sometimes, that has a mouse very close to the one in dcs), that's fine to me. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now