DutchCoolHand Posted October 29, 2019 Share Posted October 29, 2019 Update: I finally received the correct parts and production has started again. I expect to send out invoices on Monday for the current group. Did you sent the invoices Miles? I double checked my spam folder but have not seen anything? Just checking, I missed the response window in your last batch. Peter AMD RYZEN 7 2700 / 32GB / RTX2070 / 500GB M.2 with Windows and DCS / 2 - 500GB SSD / Rift S/ TM Warthog with F18 stick and Virpil WarBRD / Foxx Mounts/ MFG Crosswind rudders + 3 MFD's | Now enjoying VR with PointCTRL controllers + Gamematrix JetSeat Link to comment Share on other sites More sharing options...
MilesD Posted October 31, 2019 Author Share Posted October 31, 2019 Did you sent the invoices Miles? I double checked my spam folder but have not seen anything? Just checking, I missed the response window in your last batch. Peter Hey Peter, I have not sent any invoices yet. I got caught up trying to finish the GUI and a firmware cursor refinement achieved through code and sensor setting changes. Its always a balance for me between making updates/improvements to PointCTRL, and production for sales. I know there are still a lot of back-orders, but I discovered an opportunity to improve things for the early adopters, as well make PointCTRL better for new users. Apologies for those waiting, and for me not treating this like a business and just filling the orders as is. In the end, I think everyone will be more satisfied with PointCTRL. I have added several automation steps to production, so once it gets going full speed again, we should move through the list quickly. Thanks for your patience, Miles Now shipping up to website Pre-Order Form date 2022/06/01 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/ Link to comment Share on other sites More sharing options...
DutchCoolHand Posted October 31, 2019 Share Posted October 31, 2019 Hey Peter, I have not sent any invoices yet. I got caught up trying to finish the GUI and a firmware cursor refinement achieved through code and sensor setting changes. Thanks for your patience, Miles Please Miles don’t apologize!!! I just missed the last batch because I was at a trade show for work. I just don’t want to be late again :) AMD RYZEN 7 2700 / 32GB / RTX2070 / 500GB M.2 with Windows and DCS / 2 - 500GB SSD / Rift S/ TM Warthog with F18 stick and Virpil WarBRD / Foxx Mounts/ MFG Crosswind rudders + 3 MFD's | Now enjoying VR with PointCTRL controllers + Gamematrix JetSeat Link to comment Share on other sites More sharing options...
AKA_Clutter Posted October 31, 2019 Share Posted October 31, 2019 Miles believe me, we all appreciate your passion and great work!!! ---------------- AKA_Clutter Win 10 Pro, Intel i7 8700k @4.6 GHz, EVGA RTX 3080 FTW, Ultra 64 GB G.Skill DDR4 3600 RAM, Acer 27" flat screen, Oculus Rift S, HP Reverb G2, CH Fighterstick, Pro Throttle and Pro Rudder Pedals HOTAS, TM Warthog HOTAS, MFG Rudder Pedals, TrackIR 5 Pro w/Vector Expansion, PointCTRL. Link to comment Share on other sites More sharing options...
MacEwan Posted October 31, 2019 Share Posted October 31, 2019 Been watching this closely and extremely excited about this. Haven't been able to place an order yet due to financial reasons but will definitely be jumping on board soon (I hope). Keep up the great work Miles! Link to comment Share on other sites More sharing options...
sirrah Posted November 3, 2019 Share Posted November 3, 2019 Update The chip manufacturer finally fixed the mislabeling issue. Production will be starting again tomorrow. Here is a video preview of the new PointCTRL GUI. The sound is low so you may have to turn it up. Miles Hi Miles, How's that fine looking GUI coming along? (No pressure of course, just curious :)). Let us know if you need testers System specs: i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM ~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH Link to comment Share on other sites More sharing options...
Los Posted November 3, 2019 Share Posted November 3, 2019 I have had several sessions in front of the new GUI. It is intuitive and should meet almost all of your calibration and set up needs without having to do them within VR. It is as you see in the vid. Los Link to comment Share on other sites More sharing options...
crazysundog Posted November 3, 2019 Share Posted November 3, 2019 Wow, that GUI looks great! You are doing great work, sir! Love my pointCTRL Link to comment Share on other sites More sharing options...
MilesD Posted November 3, 2019 Author Share Posted November 3, 2019 (edited) Firmware Update: HeloGuy, Deano, and a few other have been testing a new firmware that increases cursor resolution, and makes button presses more consistent. I was going to wait to put it out, but I added it as a beta option on the firmware page. https://pointctrl.com/firmware/ The password is on your invoice, If you cant find it just ask me on discord. I will be removing the password requiment as soon as I refine some of the firmware security. This update wont change your current calibration and settings, and you can switch back to the original at any time. Please let me know what you think, its easy to tweak now that the heavy lifting is done. Thanks, Miles Hi Miles, How's that fine looking GUI coming along? (No pressure of course, just curious :)). Let us know if you need testers I am coding the serial coms for transferring the settings variables Sirrah. I am going to put out a small program for those that would like to help. You just to run a small app and it will help me determine the visible limits inside the different VR headset models. Thanks for asking and offering Sirrah, I have had several sessions in front of the new GUI. It is intuitive and should meet almost all of your calibration and set up needs without having to do them within VR. It is as you see in the vid. Los Los!!!, Time for a night out with the Wives again. Wow, that GUI looks great! You are doing great work, sir! Love my pointCTRL Hey SunDog, Glad to hear you are enjoying PointCTRL Edited November 3, 2019 by MilesD Now shipping up to website Pre-Order Form date 2022/06/01 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/ Link to comment Share on other sites More sharing options...
MilesD Posted November 4, 2019 Author Share Posted November 4, 2019 Important Update: I uploaded the wrong version of the Firmware to the website, it has lag and other issues. Deano found some issues with the correct beta version. I am fixing them now and should have a good update live within the hour. Thanks Deano, Miles Now shipping up to website Pre-Order Form date 2022/06/01 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/ Link to comment Share on other sites More sharing options...
MilesD Posted November 4, 2019 Author Share Posted November 4, 2019 (edited) Update: The correct new firmware is up with the hotfix from Deano's testing. https://pointctrl.com/sdm_downloads/pointctrl-update-110419-beta/ Thanks, Miles Edited November 4, 2019 by MilesD Now shipping up to website Pre-Order Form date 2022/06/01 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/ Link to comment Share on other sites More sharing options...
RogueSqdn Posted November 4, 2019 Share Posted November 4, 2019 I’ve been out of the loop for the past few weeks... does this include the GUI? Thanks Sent from my iPhone using Tapatalk DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to comment Share on other sites More sharing options...
Bearfoot Posted November 4, 2019 Share Posted November 4, 2019 Hi Miles, If this has been covered in a tutorial video, please point me in the right direction. From the documentation, it appears we will have: left click, right click, and scroll wheel. Does the last include a (middle) click? I find double middle-click useful for turning the mouse cursor on/off. It is by default bound to a hot key (L-ALT C), but of course, it would be really convenient to activate/deactivate this using Point Ctrl. Link to comment Share on other sites More sharing options...
MilesD Posted November 4, 2019 Author Share Posted November 4, 2019 I’ve been out of the loop for the past few weeks... does this include the GUI? Thanks Sent from my iPhone using Tapatalk No, this update improves FCU tracking, cursor resolution, and helps smooth out the finger shakes, making button presses more consistent. Hi Miles, If this has been covered in a tutorial video, please point me in the right direction. From the documentation, it appears we will have: left click, right click, and scroll wheel. Does the last include a (middle) click? I find double middle-click useful for turning the mouse cursor on/off. It is by default bound to a hot key (L-ALT C), but of course, it would be really convenient to activate/deactivate this using Point Ctrl. There is not currently a center mouse button. Is their additional functionality achieved when the mouse cursor is off? PointCTRL automatically hides the cursor when the FCUs are out of view or timed out. Thanks for the questions guys, Miles Now shipping up to website Pre-Order Form date 2022/06/01 Pre-Order Form Submission https://pointctrl.com/preorder-form/ PointCTRL Support Discord https://discord.gg/jH5FktJ PintCTRL Website https://pointctrl.com/ Link to comment Share on other sites More sharing options...
Bearfoot Posted November 4, 2019 Share Posted November 4, 2019 There is not currently a center mouse button. Is their additional functionality achieved when the mouse cursor is off? PointCTRL automatically hides the cursor when the FCUs are out of view or timed out. Miles Thanks for the quick response, Miles. No additional functionality. It's just that with the regular mouse the time out takes so long and the blue cross is distracting especially in critical moments that I often just switch it off instead of waiting it out. Now this relates just to the regular mouse --- not sure how things will work with PointCTRL as I am not yet one of the lucky ones to have received mine! I guess if returning my hands to their resting positions on the HOTAS will take the FCU's out of view than it will work perfectly. I suspect though that I may still need to LALT-C or double click the mouse middle button to effect this. Or just get used to waiting out the time out! Link to comment Share on other sites More sharing options...
Chic Posted November 5, 2019 Share Posted November 5, 2019 Bearfoot, VoiceAttack could help ya there. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS Link to comment Share on other sites More sharing options...
Wakkaman Posted November 6, 2019 Share Posted November 6, 2019 I am really interested in the VR pointing device, really immersive, but i also fly a lot of x plane 11. Are you considering support for x plane 11? Link to comment Share on other sites More sharing options...
mars Posted November 6, 2019 Share Posted November 6, 2019 I just want to drop in here to say that I installed the new beta firmware and the finger tracking is fantastic. 100% matches my standard mouse tracking with no "shaking" or "jumping". Thanks Miles! Mars Link to comment Share on other sites More sharing options...
sirrah Posted November 7, 2019 Share Posted November 7, 2019 I am really interested in the VR pointing device, really immersive, but i also fly a lot of x plane 11. Are you considering support for x plane 11? I'm pretty sure you can use it for whatever VR software you like, as long as it has mouse support. System specs: i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM ~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH Link to comment Share on other sites More sharing options...
FoxDelta Posted November 7, 2019 Share Posted November 7, 2019 i doubt that, as other sims provide their mouse interaction in a diffrent manner, someone owning PCtrl and having xplane may check, but i woulnd t make a bet my projects: https://www.sim-addons.com/ https://www.shapeways.com/shops/sim-addons-1 AV8B nozzle lever https://forums.eagle.ru/showthread.php?t=233670 F18C fingerlifts https://forums.eagle.ru/showthread.php?t=234747 F18C radar elevation https://forums.eagle.ru/showthread.php?t=248080 Link to comment Share on other sites More sharing options...
Wakkaman Posted November 7, 2019 Share Posted November 7, 2019 I'm pretty sure you can use it for whatever VR software you like, as long as it has mouse support. So you can also use it as a mouse in any program? If so it should definitely work in x plane 11..:pilotfly: Link to comment Share on other sites More sharing options...
Wakkaman Posted November 7, 2019 Share Posted November 7, 2019 i doubt that, as other sims provide their mouse interaction in a diffrent manner, someone owning PCtrl and having xplane may check, but i woulnd t make a bet yeah maybe, but x plane 11 basically only use left and right click...I can bind any keys to the knobs of Vr pointing device? Link to comment Share on other sites More sharing options...
FireCat Posted November 7, 2019 Share Posted November 7, 2019 (edited) I am really interested in the VR pointing device, really immersive, but i also fly a lot of x plane 11. Are you considering support for x plane 11? Hi Wakkaman, this question was asked many posts ago this was the answer then (link below) I don't know if anything has changed since then but if you haven't already tried the PointCTRL Discord channel I know MilesD answers all questions but at the moment he is trying to catch up on production and finishing the GUI/firmware side so it may take him a little longer to respond. Hope this helps. https://forums.eagle.ru/showpost.php?p=3906171&postcount=929 also a few answers here. https://forums.eagle.ru/showpost.php?p=3937033&postcount=1149 If you are interested and intend to purchase let me know and I will add you to the list. Regards FireCat. Edited November 7, 2019 by FireCat Link to comment Share on other sites More sharing options...
Andrew u.k. Posted November 7, 2019 Share Posted November 7, 2019 Hi, Please would you add me to the list. Cheers Andrew Sent from my SM-N960F using Tapatalk Link to comment Share on other sites More sharing options...
FireCat Posted November 7, 2019 Share Posted November 7, 2019 Hi, Please would you add me to the list. Cheers Andrew Sent from my SM-N960F using Tapatalk Hi Andrew u.k., You have been added to the list link below. https://forums.eagle.ru/showpost.php?p=3862014&postcount=690 Also, check out MilesD post for the PointCTRL Discord link. https://forums.eagle.ru/showpost.php?p=3607054&postcount=1 Regards FireCat. Link to comment Share on other sites More sharing options...
Recommended Posts