Jump to content

Through The Inferno (Normandy 1984 - Modern) - Highly dynamic and endless mission


Recommended Posts

UPDATE 08/17/19 - 1: v1.54a

 

 

-Fixed a major issue with map-marker zeus spawns not working correctly after the latest OB update from 8/14/19 https://forums.eagle.ru/showpost.php?p=4008751&postcount=66

This latest version of TTI is REQUIRED if you wish to get map=marker zeus spawns to work properly again.

 

- Changed logic for JTAC units to optimize performance. JTAC units are now generated dynamically with mission zones and will be removed once the mission is complete.

 

Additionally, this means you can move mission zones around in the mission if you'd like, but the mission intel will be incorrect. You can use the JTAC Status as a work-around to get the coordinates of the designated targets if you aren't relying on the F10 Map.

 

- Added a new JTAC zeus spawn that you can create anywhere on the map to spawn a JTAC recon drone to auto-lase/designate and smoke targets. The code for these JTAC drones created by zeus map marker spawning is always 1685 for now. I do have future plans to edit this on the fly. You can make as many of these as you'd like.

 

zeus-jtac-drone-tutorial.gif

 

NOTE: For TTI Normandy WW2 , you must use "recon" instead of "jtac" to spawn the auto-lase/designating sentry unit.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 3 weeks later...

UPDATE 09/03/19 -1: v1.55a

 

 

- Added new JTAC Auto Lase Logic to now include ELEVATION IN FT of the marked target:

 

unknown.png

 

Big thanks to SanekFl for helping me find the scripting logic to implement this.

 

I looked into script and added target elevation info. Please review pull request

https://github.com/ciribob/DCS-JTACAutoLaze/pull/3

 

 

- Added a new map marker command "-delete jtac" that will remove the last zeus-spawned jtac. A new message appears when creating a zeus jtac to remind you of this new command and feature.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 5 weeks later...

UPDATE 10/03/19 - 1: v1.56a

 

- Added F-16C Viper Slots x2

- Added a fix for enemy aircraft causing a ground mission to appear active when it flies through the zone. Mission zones will now ignore flying units.

- Changed dynamic JTAC spawning logic so that the dynamically crated JTAC names will now state which mission type they are marking for, making better use of the "JTAC Status" feature in the F10 - Other Menu

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 3 weeks later...

UPDATE 10/22/19 - 1: v1.57a

- Updated Moose Frameworkto latest version

 

- Added AIRBOSS Script:

https://flightcontrol-master.github.io/MOOSE_DOCS_DEVELOP/Documentation/Ops.Airboss.html

 

 

- Included config options for Airboss

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 10/26/19 - 1: v1.58a

- Added Airboss Voice Audio Clips

- Removed WPTS from F-14B as they cannot be utilized and cause errors in the ME.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 1 month later...
  • 5 weeks later...

UPDATE 01/02/20 - 1: v1.59a

- Added A2A Helo Mission via menu and configurable auto-spawns

- Red and Blue Helo Zeus spawns added to zeus spawn list (check included spawnable units list or briefing for more details)

- Fixed tanker track from running into terrain.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 2 months later...

UPDATE 03/09/20 - 1: v1.60a - Major update for 2.5.6 Compatibility

- Updated compatible DCS 2.5.6 OpenBeta MOOSE (experimental dev) framework

- Random Air Traffic DISABLED by default due to instability in 2.5.6 Open Beta (feel free to re-enable at your own risk and discretion.)

- Airboss Script DISABLED by default due to instability in 2.5.6 Open Beta (feel free to re-enable at your own risk and discretion.)

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 1 month later...

UPDATE 04/16/20 - 1: v1.61a

- Fixed an issue where EWRS was not working properly

- Removed Reset AWACS from debug

- LHA-1 Tarawa matches patch of CVN-74 (on carrier maps only)

- JTAC Target Reports now show DM.M, DMS.S and MGRS

- KC-135 speed adjusted for F-16C usage ~Mach 0.6

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 3 weeks later...

UPDATE 05/04/2019 - 1: v1.63a

- Fixed a2g helo/infantry assault missions, they now are recognized as different missions

 

- Fixed a major issue for A2A helo missions that didnt allow them to spawn correctly

 

- Fixed an issue where some JTACs would not be high enough for missions in mountainous areas.

 

- Enabled airboss by default

 

- Enabled random air traffic by default

 

- Added slower KC-135 for a10

 

- Fixed kneeboard text to provide more tanker information such as flight level and speed.

 

- Aaded TONS options for random air traffic, including fighter jet/carrier ops random air traffic: (expand spoiler text to see all new options)

random_civ_air_traffic = SET TRUE OR FALSE if you want random civilian air traffic doing their own thing at random airfields.

random_fighter_air_traffic = SET TRUE OR FALSE if you want random fighter jet air traffic doing their own thing at random airfields.

 

-- # of civ aircraft spawns PER TYPE,

civ_rat_spawns = the amount of civilian ai air traffic spawns per type

 

-- set # of fighter aircraft spawns, for each type individually

fighter_rat_a10_spawns = 1

fighter_rat_f18_grnd_spawns = 1

fighter_rat_f18_cv_spawns = 1

fighter_rat_f16_spawns = 1

fighter_rat_f15_spawns = 1

fighter_rat_f14_grnd_spawns = 1

fighter_rat_f14_cv_spawns = 1

 

-- misc flight settings

air_traffic_flight_level = the flight level of ai air traffic (100 = 10,000 ft)

max_distance_destination = the max distance to a random airfield the ai air traffic will travel to in KM

 

civ_allow_immortal = true or false to allow civ aircraft to be immortal

civ_allow_invisible = true or false to allow civ aircraft to be invisible

 

fighter_jet_combat_mode = set free/hold/return combat mode for fighter jets

-- free is weapons free, ai will go on offensive

-- hold is weapons hold, they will not fire

-- return is return fire, they will only fire when fired upon.

 

fighter_jet_immortal = true or false to allow fighter jets to be immortal

fighter_jet_invisible = true or false to allow fighter jets to be invisbile to AI

 

-- enable or disable ai aircraft types that will spawn in (use true or false)

 

-- civilian

enable_yak = true or false

enable_c130 = true or false

enable_c17 = true or false

enable_an26 = true or false

-- fighter jet

enable_f14_cv_to_ground = spawns an f14 on the carrier, which will then land on a ground airfield

enable_f14_ground_to_cv = spawns an f14 on a ground airfield, which will then land on the carrier

enable_f18_cv_to_ground = spawns an f18 on the carrier, which will then land on a ground airfield

enable_f18_ground_to_cv = spawns an f18 on a ground airfield, which will then land on the carrier

enable_f14 = true or false (nttr only)

enable_f15 = true or false

enable_f16 = true or false

enable_f18 = true or false (nttr only)

enable_a10 = true or false

 

 

- Added option for JTACs to spawn at the random SAM spawn sites

sam_site_jtacs_enable = SET TRUE OR FALSE IF YOU WANT JTACS THAT LASE/SMOKE AT THE RANDOM SAM SITES

 

- Added option for enemy ships to attack/defend or do nothing

enemy_ship_ai = SET TRUE OR FALSE if you want enemy AI ships to attack/defend or do nothing.

 

- Made Random Mission Name visible when mission starts

 

- Removed JF-17 Refueling Probe by default

 

- Mounted DDM Sensors for M-2000C by default

 

- Changed some radio menu text to make "Ground Mission Location Intel" more obvious and visible.

 

- Updated backend scripting engine (latest MOOSE version as of May 2020)

 

- Optimized Mission Detection logic to be significantly less taxing on CPU, will now only be searching within ACTIVE ZONES rather than ALL ZONES.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 05/08/2019 - 1: v1.63f

Improved A2A Intercept Bomber Mission logic:

- Bomber escort fighters will now properly spawn near bomber and follow them

- An air raid siren sound and notification will let the player know when the bombers begin their attack.

 

Added new settings:

enable_airbase_bombers = set true or false if you want bombers that attack your main airbase

enable_carrier_bombers = set true or false if you want bombers that attack ships (only where anti-ship missions are available)

enable_bomber_escorts = set true or false if you want bombers with escort fighters

ground_bomber_amount = how many bombers at each spawn

ship_bomber_amount = how many bombers at each spawn

 

Other small changes:

- Moved "Ground Intel" menu option to the front end of the F10 - Other menu.

- Added UI SFX for the ground location intel report

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 2 weeks later...

UPDATE 05/20/2020 - 1: v1.66a -

OLD MISSIONS WILL NOT WORK WITH THE SUPER CARRIER UPDATE UNLESS YOU USE THIS NEW MISSION FILE.

All TTI SP Maps:

- Optimized Intel reports to be more 'modular' to make updating the mission easier.

- Added ROE Weapons Free to enemy fighter escorts that escort bombers.

 

TTI SP Maps with Carrier Ops:

- Added second MIZ file to support Super Carrier optionally to avoid having players going into the mission editor to change the carrier.

- Super Carrier CVN-7X added to second miz

- Super Carrier Kuznetsov added to second miz

- Fixed a major bug where enabling ship AI causes a script error loop

- Updated Moose Script Framework to support the Airboss Mod update to work with the Stennis and new Super Carriers.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 05/21/2020 - 1: v1.66b - IMPORTANT HOTFIX

Caucasus:

- Fixed a major issue where a WWII Asset Pack unit was accidentally placed on the map, making the map un-playable and un-editable for those who do not own the WWII Asset Pack DLC.

NTTR:

- Fixed an issue where the default AI Air Traffic spawns were set to hilariously high spawn rate.

All Maps:

- Fixed a major issue where setting A2A Carrier Bombers to "true" caused a script error loop.

- Added a new method to detect map/terrain type to make better use of shared scripts. This is more of a back-end scripting improvement and won't affect gameplay.

 

- Added reference point ships by the carrier for CASE I recovery procedures.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 05/24/2020 - 1: v1.66c

Caucasus:

- Fixed an issue where SA-11 template units were not set to late activation

All Maps:

- Fixed an issue where WPT/Mission Map Markers were not deleting when a mission was complete.

- Added an option to enable/disable JTAC Drones at all A2G Missions

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 05/26/2020 - 1: v1.66d

- Added Super Carrier Deck Layout Menu to TTI Maps with the Super Carrier

 

tti-supercarrier-deck-menu-demo.gif

 

 

Big thanks to Redkite for allowing me to add these amazing static deck layouts for the Super Carrier.

 

Layout Scripts Created by Redkite

https://www.digitalcombatsimulator.c...files/3309905/

https://youtu.be/XONOFbhwbsU

https://www.youtube.com/user/RedKiteRender/

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 06/02/2020 - 1: v1.66e

- Fixed typo in Tanker Tacan channels in briefing and kneeboard

- Tanker Tacans now properly broadcast callsign, distance, and bearing in the Y/TR/AA mode as intended.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

Just a small issue on the Through The Inferno website, the link to the download of this 1984 Normandy map points to the 1944 WWII one.

Helicopters and Viggen

DCS 1.5.7 and OpenBeta

Win7 Pro 64bit

i7-3820 3.60GHz

P9X79 Pro

32GB

GTX 670 2GB

VG278H + a Dell

PFT Lynx

TrackIR 5

Link to comment
Share on other sites

  • 1 month later...

UPDATE 07/15/2020 - 1: v1.67a

!! - THIS UPDATE IS REQUIRED IF YOU WANT TO PLAY TTI SP on DCS Open Beta Version 2.5.6.52196 - !! - USE VERSION 1.66e if you are on a previous version of DCS Open Beta.

 

- Fixed a major issue where the some Chinese ships were removed/deleted from previous TTI SP mission v1.66 after updating to DCS Open Beta

2.5.6.52196

- Added option to change Carrier AI traffic spawn settings to be hot/cold/runway

- Added option to change default JTAC drone laser code

- Added option to change CTLD Helo Troop Pickup Zone smoke color

- Added option to disable or enable CTLD Helo Troop Pickup Zone smoke

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 4 weeks later...

UPDATE 08/08/2020 - 1: v1.68a

- Updated ALL ground mission zones to use "zone polygons" which are essentially HAND-DRAWN boundaries within towns, cities, landmarks that still spawn units in a random position within the zone, but in a more realistic position to add a bit more immersion.

 

If you still like the "blob" of units in a circle formation in an open feel, there is a quick guide on how to get that spawning method back.

 

 

This WILL make missions a bit more challenging due to the fact that units easily blend in with buildings, trees and other structures a bit more. Feel free to re-draw the zones or move them as you'd like.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 3 weeks later...

UPDATE 08/27/2020 - 1: v1.68d

- Fixed an issue where spawning "hmv" via Zeus map marker command wasn't working

 

- New logic in A2G Mission spawning will now prevent the same mission from re-spawning after being completed. A different mission will be randomly selected.

 

- Ground mission vehicles will now spawn with a random heading/azimuth.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 1 month later...

UPDATE 09/30/2020 - 1: v1.71a

- Added A-10C II module

- Added C-101CC module

- Added MiG-29G module

- Added AI Helo Transport Script

helo_troop_transport_auto.gif

 

 

helo_troop_transport_zeus.gif

- Add new debug feature and option to remove enemy ground units that are dynamically spawned above ground on top of buildings, folliage etc...

- Fixed incorrect tanker information in briefing and kneeboard

- Joint Task force coalition add to use for ease of adding/changing units

- Change Kuznetsov country to Joint Task Force Coalition Blue

- Change Su-33 country to Joint Task Force Coalition Blue

- Removed intrusive config folder that blocked some custom client settings from being applied

- Removed redundant mission detection checks to improve performance

- Improvements and optimizations to JTAC Auto Lase script to improve performance

- Disabled a few mission types by default to improve performance

- Disabled Airboss Rescue Helo by default to improve performance

- Disabled F/A-18C and F-14B Ground Random Air Traffic spawns by default to improve performance

- Removed non-Super Carrier extra miz file and included tutorial in included README.txt on how to change the Super Carrier units to the free carrier units.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • 4 weeks later...

UPDATE 10/28/2020 - 1: v1.72b

- Added dynamic convoy missions;

*Convoys can be configured to auto-start or spawned via the mission spawner menu

*They will be randomly generated, the unit composition of the convoy will be varied

*Their starting positions and routes will be randomly selected

*They can be repeated like normal A2G Missions

*Using the F10 - Other Intel report will provide a L/L of the convoy's position at the time of the intel being requested.

*Configurable option to allow for adding map markers on the F10 Map to show the convoy's position (The convoy map marker will update when intel is requested)

 

[ATTACH=JSON]{"data-align":"none","data-size":"custom","data-tempid":"temp_260113_1603922364647_804","height":"341","title":"convoy mission intel SP.PNG","width":"473"}[/ATTACH]wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==

 

- Fixed an issue for carrier maps where using CVN-75 caused datalink issues. All carrier maps will now use CVN-72 instead.​

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 12/05/2020 - 1: v1.72d

- Added F-14A Module
- Updated MOOSE for F-14A Airboss Compatibility

- Changed WPT name labels to match the zones they belong for easier customization/editing.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 02/07/21 - 1: v1.80a
- Overhaul on all ground and air spawnable units at A2A and A2G Missions as well as "Zeus" spawnable units:
    - ALL DCS Aircraft and Ground Units are available to add/remove at all mission types.
    - ALL DCS Aircraft and Ground Units are available to spawn via "Zeus" spawning in real-time using map markers.
    - Free WW2 assets were also added to now allow for players to adjust the spawning pools to be more geared towards WW2 engagements.
  
A2A Missions are now more based on aircraft types rather than their group size/skill level. The default setup would be that easy aircraft will be less formidable types; L-39, C-101, etc, where hard aircraft will consist of Su-30, F-15C, etc. These templates can be adjusted to what the player is more comfortable with.

Expanding the unit pools and database within the mission to ALL DCS units will give players the ability to make any combination of enemy forces; Change the spawning pools to only spawn "Eastern" faction units or "Western" faction units for realistic engagements. The current setup is a mix between both "RED" and "BLUE" faction enemy units.


- Added an aircraft skill setting for both RED and BLUE AI aircraft.
 

- Allowed for changing out enemy unit spawning pools for all A2G mission types; A2G Easy, Hard, Helo, Infantry Assault, Anti-ship.


- Moved all "template" units to scripting for much more modularity and ease of mission maintenance/updates when new maps, modules units are released.


- Fixed an issue where editing the playable client slots would sometimes cause a crash/black screen on mission start.


- Fixed and polished countries and coalitions so that client aircraft and friendly coalition units have more customization potential.


- All client aircraft are set to their country of origin (ex. the Su-27 is set to Russia and the J-11A is set to China, etc...).


- Client aircraft slots further polished fixing many typos and naming formats.


- Added CSAR (search and rescue) script for all helicopters. A new CSAR menu was added, which also includes an option to FORCE a rescue mission on command. Simply fly to the downed pilot (Friendly infantry unit named "Wounded Pilot" on map) and hover over to pick them up. Bring them back to an airfield, FARP or ship to complete the rescue.
Additionally; Friendly player and AI that eject will spawn a new rescuable pilot where the ejection took place.


- Added an option that will limit the amount of aircraft spawned in via the F-10 - Other A2A spawning menu to prevent unlimited spamming of A2A missions. By default this option is set to allow for unlimited A2A mission stacking.


- Added an option for enabling/disabling the friendly carrier groups from attacking enemy aircraft.


- Renamed the Random Air Traffic (RAT) units in the editor to more generic names like "Large 1" or "Fighter 1" so that players can change out the type of aircraft the random air traffic will be in the editor. You can also edit their loadouts if applicable.


- Various base code improvements that allow for better performance overall.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

UPDATE 02/21/21 - 1: v1.80b
- Changed how A2A enemy spawning works. Instead of using a random position within a single large zone which sometimes results in bandits spawning on top of you, there are now 10 random A2A enemy spawn starting position zones which you can move around to change generally where bandits may come from. It chooses one of these A2A enemy spawn zones at random each time an A2A enemy group is initiated.
 

- Added missing SA-15 Tor unit to spawning pool, database and zeus script. Unit list was also updated.

 

- Moved SFX files to their own directory instead of using the trigger list implementation, which saves nearly 1MB of filesize.

"Through The Inferno"

Endless, Dynamic, Open-World Experience for DCS World
Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...