Jump to content

[NO BUG] No TM Warthog Throttle


Recommended Posts

Throttles don't move. In Axis Tune they move.

 

Thrust L = Joy RZ

Thrust R = Joy Z

 

First Training module flying thru the boxes they work but Cold and Dark they don't???

 

I usually have problems getting the rudders to work but it's the throttles now.

 

I made sure nothing else was mapped to the throttle.

 

Could use your help on this one....

 

Thanks

Link to post
Share on other sites

No TM Warthog Throttle

 

Same here. Not sure what to do. I’ve tried looking over the assignments for OFF and IDLE. I’ve made the throttle detents OFF because when off the stops it’s actually pressing a button. I haven’t tested yet to see if that works. Too busy playing with other stuff.

 

 

Sent from my iPhone using Tapatalk Pro

Win 10, AMD FX9590/water cooled, 32GB RAM, 250GB SSD system, 1TB SSD (DCS installed), 2TB HD, Warthog HOTAS, MFG rudders, Track IR 5, LG Ultrawide, Logitech Speakers w/sub, Fans, Case, cell phone, wallet, keys.....printer

Link to post
Share on other sites

The work. Just assign each quadrant to their appropriate key bind, off/idle, respectively. The issue is that the key bind does not resister on the up pull of the stick, but rather on the back pull, so it's sort of reversed. just do your startup with the quadrants out of the idle position, and when you want to move from off to idle in the cockpit, just physically put the quadrants back to idle at 25 or > rpm and you should be fine. Its a little weird, but it's what ive been doing.

Ryzen9 3900X, Gigabyte Aorus X570 Elite, 32Gb Gskill Trident DDR4 3600 CL16, Gigabyte Aorus 1Tb Nvme Gen4, Evo860 1Tb 2.5 SSD, EVGA FTW RTX2080 Super, Corsair h115i Platinum AIO, NZXT H710i case, Seasonic Focus 850W psu, Gigabyte Aorus AD27QHD Gsync 1ms IPS 2k monitor 144Mhz, Track ir4, TMW Hotas, Saitek combat pedals, RiftS

Link to post
Share on other sites

I'll try that tooooooo...

I had a problem on the A-10 but if I moved them all the way up then back they worked fine but not on the F/A-18.

 

Thanks

 

 

UPDATE: The R ALT and R Shift worked. Off idle didn't.

 

Thank's so much for the help......


Edited by Flapjack09
Link to post
Share on other sites

OFF/IDLE works on TM Warthog throttle but indeed it's kinda backwards. Need to push the throttle over the idle detent first and then again to "flip the switch"

YOUTUBE: https://www.youtube.com/c/antimonni

PC SPECS: Win10 Home 64Bit, i5-2500K @4GHz, 32Gb DDR3, 6Gb Nvidia GeForce GTX980Ti, 2 SSDs+HDD

CONTROLS: TM Warthog HOTAS / Saitek Combat Rudder Pedals / TM MFD Cougar x4 / TIR 5

MODULES: Almost everything!

Link to post
Share on other sites

Sorry, I ment to say starting the game with the throttles in idle and moving them to off. That seemed to work for the A-10.

 

I did the R Alt and R Shift then assigned the off/idle detent and everything was working great.

 

I have to say it handles really good. I'm a pretty bad NOOB and did a quick taxi then kinda ended up near the R/W. I said to my self... what could go wrong??? To my surprise nothing did. Flew out then landed it down the middle of the R/W. Course I had more BIT failure notices going off than a rabbit has babies! Also took off and landed with the parking brake on. Guess I have a lot to learn:)

Amazing flight model and graphics!!!

 

Thanks everyone for your help....

Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...