ESA_MistrL Posted September 4, 2007 Share Posted September 4, 2007 Thx a lot Ratcatcher.:smilewink: :smilewink: SO as far as I understood, you did get the same error message and what you did was to put the original export.lua file back within Ubisoft/Lock On/Config/Export. So you will have in that subfolder, let´s say, the original export.lua file but the VP config.lua file, is that right??? So you run VP, you move VP window to the second screen and you run LOMAC in main screen. Right? Ok, fortunately I made a copy of the originals config and export lua files. I will try that as soon as I get home today. Thx a lot for your help Ratcatcher. I apreciate a lot. If anyone else has anything to say for helping, please, DO NOT HESITATE :thumbup::thumbup: Cruz de San Andres First learn to fly. Then learn to fight. [sIGPIC]www.cruzdesanandres.com[/sIGPIC] Link to comment Share on other sites More sharing options...
Ratcatcher Posted September 4, 2007 Share Posted September 4, 2007 Hi Mistral, no probs for helping. I was in the same boat as you, and I know how frustrating it is. On what you've done, not sure if your doing the config bit right. In your lockon/config/export dir you should have two files the export.lua and the config.lua. Both these should have been copied across from the VP download, overwriting your existing ones. ( Backup your originals ). The only extra file I have in there now is the touch buddy one ( touchbuddy-exort.lua ). Good luck. 1 Techlabs Chameleon Watercooled Gaming PC - Intel Core i7 6700K @ 4.7GHz : Samsung 950 Pro 256GB SSD, Samsung 500 gig SSD, Seagate 1TB 7200RPM Drive : MSI GeForce GTX 1080 "Founders Edition" 8192MB : 800W '80 Plus Gold' Modular Power Supply : 32GB (2x16GB) DDR4 PC4-25600C16 3200MHz : Occulus Rift S : TM Warthog : MFG Crosswind V2 : Win 10 64. PointCTRL. Link to comment Share on other sites More sharing options...
ESA_MistrL Posted September 4, 2007 Share Posted September 4, 2007 Hi Mistral, no probs for helping. I was in the same boat as you, and I know how frustrating it is. On what you've done, not sure if your doing the config bit right. In your lockon/config/export dir you should have two files the export.lua and the config.lua. Both these should have been copied across from the VP download, overwriting your existing ones. ( Backup your originals ). The only extra file I have in there now is the touch buddy one ( touchbuddy-exort.lua ). Good luck. Ok lets see. Yeap, initially, I copied across the two files from the VP download compressed file, overwriting the existing ones and backuping them before. Now what you told me is to put the export.lua file back (the original one, not the downloaded one) within the subfolder Ubisoft/Lock On/Config/Export, run VP, move it to the secondary screen and then run lomac. Right? Just to be sure about your instructions. Thx a lot. Cruz de San Andres First learn to fly. Then learn to fight. [sIGPIC]www.cruzdesanandres.com[/sIGPIC] Link to comment Share on other sites More sharing options...
ESA_MistrL Posted September 4, 2007 Share Posted September 4, 2007 OK. Problem fixed. I was my foult. I discovered what I was doing wrong. This tool is wonderful, amazing. Thx a lot. Cruz de San Andres First learn to fly. Then learn to fight. [sIGPIC]www.cruzdesanandres.com[/sIGPIC] Link to comment Share on other sites More sharing options...
Ratcatcher Posted September 4, 2007 Share Posted September 4, 2007 Good to hear. Quick question for Mnemonic.... are you still working on the photo realistic instruments ? the one you posted looked stunning! cheers Techlabs Chameleon Watercooled Gaming PC - Intel Core i7 6700K @ 4.7GHz : Samsung 950 Pro 256GB SSD, Samsung 500 gig SSD, Seagate 1TB 7200RPM Drive : MSI GeForce GTX 1080 "Founders Edition" 8192MB : 800W '80 Plus Gold' Modular Power Supply : 32GB (2x16GB) DDR4 PC4-25600C16 3200MHz : Occulus Rift S : TM Warthog : MFG Crosswind V2 : Win 10 64. PointCTRL. Link to comment Share on other sites More sharing options...
Mnemonic Posted September 4, 2007 Author Share Posted September 4, 2007 Many thanks to all! :) I'm very glad that you find my util useful! Thanks all of you guys for technical support, I'm very busy last time so, sorry, can't answer quickly... About textures, I give my work with textures and also many photo materials to one experiensed guy, so I hope they will be soon. About any other upgrades, sorry I have many "surprises" this summer, among them - I changed my job. I think that I return to work with LOVP when my second breathe would be opened, you know what I mean ) P.S. Guys, I with you, I still with community. But busy all the time. As soon as I can, I will make further upgrades. Thank you. Link to comment Share on other sites More sharing options...
SilverOne Posted September 8, 2007 Share Posted September 8, 2007 is there anyway to get this running on 1 pc with 2 screens ? [-]SilverOne[-] [- Best Regards [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Mnemonic Posted September 9, 2007 Author Share Posted September 9, 2007 Man, please read thread from begining )... This stuff developed for running in 1 PC with 2 screens, without loosing FPS in LockOn. (As feature, you also can run this on 2 PC's) Link to comment Share on other sites More sharing options...
SilverOne Posted September 9, 2007 Share Posted September 9, 2007 Man, please read thread from begining )... This stuff developed for running in 1 PC with 2 screens, without loosing FPS in LockOn. (As feature, you also can run this on 2 PC's) thanks for the help. honestly lol. [-]SilverOne[-] [- Best Regards [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
G3 Posted September 12, 2007 Share Posted September 12, 2007 hey Mnemonic, its been awhile since we spoke last, life gets crazy sometimes and we can all appreciate that. i am just about to setup my flight sim again, currently going thru configuring things such as this lovp, TB etc, one thing at a time. look forward to your next release, US gauges is what i need :D good luck sorting out your hectic life:thumbup: Link to comment Share on other sites More sharing options...
Mnemonic Posted September 12, 2007 Author Share Posted September 12, 2007 Thanks buddy ;) Link to comment Share on other sites More sharing options...
kram56 Posted January 17, 2008 Share Posted January 17, 2008 Hi, I'm just fixing this up for my Dad, how difficult would it be to add the Landing Systems Signal Panel and even the RHAW :music_whistling: Great work :thumbup: Link to comment Share on other sites More sharing options...
ReadMe Posted January 21, 2008 Share Posted January 21, 2008 Good morning. I am using TouchBuddy in Client/Server Mode utilising RuggButts F15C profile with an additional transparent window so that LOVP can be displayed. My Client PC is "trusted" by my Firewall. In my Eagle Dynamics/Lock On/Config/export directory I have 3 files : config.lua (set to true) export.lua (from the LOVP download - "localhost" substituted for the IP address of my client PC on my LAN. At the bottom of this file I have added - dofile("./Config/export/tbvp-export.lua") tbvp-export.lua (not modified in anyway) I have also amended my touchbuddy.cfg file to point to where the touchbuddy-export.dat file is in the Lock On directory. I launch TouchBuddy (Server Mode), then Lock On from my gaming PC. On my Client PC I launch TouchBuddy (Client Mode), and then LOVP. When I fly the F15 mission from the load up screen, the TEWS screen starts to update straight away. The weapons loadout also displays. Througout all this. LOVP remains "Disconnected", no movement in the gauges. I have tried other combinations of aircraft with the same results - LOVP displays "Disconnected" My Temp/Error file shows the following: LuaExport::LuaExportStart: connection refused LuaExport::LuaExportAfterNextFrame: ./Config/export/tbvp-export.lua:130: attempt to index global `c' (a nil value) LuaExport::LuaExportAfterNextFrame: ./Config/export/tbvp-export.lua:130: attempt to index global `c' (a nil value) LuaExport::LuaExportAfterNextFrame: ./Config/export/tbvp-export.lua:130: attempt to index global `c' (a nil value) This repeats ad-infinum until LuaExport::LuaExportStop: ./Config/export/tbvp-export.lua:135: attempt to index global `c' (a nil value) Does anyone know what the problem is please? Obviously LuaExportStart refuses the connection but how come TouchBuddy is getting the data (via the tbvp-export.lua) but LOVP doesn't? Thanks very much. S! Link to comment Share on other sites More sharing options...
ReadMe Posted January 24, 2008 Share Posted January 24, 2008 I was able to get LOVP running (using TB in client/server) utilising the tbvp-export.lua by putting a partial LAN IP address in the export.lua as follows: dofile "lua.lua" socket = require("socket") host = host or "192.168.1." port = port or 8080 Have posted this just in case anyone else has a similar problem. Have a good one. Link to comment Share on other sites More sharing options...
Lib Posted February 6, 2008 Share Posted February 6, 2008 Hi, first sorry for bad english, i'm french. i have a little problem with LOVP. It works very well but too "slowly". The ADI is moving by "jerk" seems like little lags. Is it possible to make it move in "reel time" or have I a config problem ? What can i do ? my config : - Asus striker extrem, intel core2duo E6850, ram 3Go, hdd 2 sata II raid0, 8800GTX. Thanks in advance Lib Link to comment Share on other sites More sharing options...
Gromich Posted February 10, 2008 Share Posted February 10, 2008 LOVP is great !!! Anyway i have some troubles. Building my Su25 simpit i use IOcards and LoIOCP interface protocol. This one use in export.lua port adress 10312 and LOVP use the 8080 one. The socket seems to be different too. Have you any issue which could make work both programs ? LoIOCP export file : function LuaExportStart() dofile "lua.lua" socket = require("socket") host = "127.0.0.1" port = 10312 csock = socket.try(socket.connect(host, port)) -- connect to the listener socket csock:setoption("tcp-nodelay",true) -- set immediate transmission mode local file = io.open("c:/pit_info.log", "w") -- Si fichier creer if file then -- Rediriger les entree/sortie sur le fichier io.output(file) end Link to comment Share on other sites More sharing options...
FullerGer Posted September 6, 2008 Share Posted September 6, 2008 Hi, i saw this picture in the thread, but I dodn't know where to download it. I just found some Sovjet Style one on lockonfiles.com [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
FullerGer Posted September 7, 2008 Share Posted September 7, 2008 does anyone know this ? [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
walternowi Posted September 7, 2008 Share Posted September 7, 2008 does anyone know this ? This looks like a TouchBuddy profile with a transparent panel that works with Virtual Panel. You need a secondary touchscreen monitor for TouchBuddy. You can find more info about TouchBuddy here: http://www.touch-buddy.com/forums/ Intel Xeon E5-1650 v2 ASUS Sabertooth X79 4 x 4GB Crucial Ballistix VLP PC3-12800 ASUS Cerberus GTX 1070 Ti 8 Gb Seasonic Platinum 860W Thrustmaster Cougar Uber II Nxt CH Products PT/TQ/MFP Slaw Pedals TrackIR 5 Link to comment Share on other sites More sharing options...
FullerGer Posted September 7, 2008 Share Posted September 7, 2008 I have downloaded the Touchbuddy. But it always looks like that : But I want this [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
walternowi Posted September 8, 2008 Share Posted September 8, 2008 You need to load the TouchBuddy profile written by "DickDastardly" and use it with Lock On Virtual Panel. That profile and more details can be found in post#106 on p.11. http://forums.eagle.ru/showpost.php?p=318289&postcount=106 Intel Xeon E5-1650 v2 ASUS Sabertooth X79 4 x 4GB Crucial Ballistix VLP PC3-12800 ASUS Cerberus GTX 1070 Ti 8 Gb Seasonic Platinum 860W Thrustmaster Cougar Uber II Nxt CH Products PT/TQ/MFP Slaw Pedals TrackIR 5 Link to comment Share on other sites More sharing options...
edrom Posted February 23, 2009 Share Posted February 23, 2009 Hello Mnemonic, Great Job!:worthy: I use your work since time. It is posible to change parameter port to combinate LOVP with other software ( like LOIOPC or LOSIOC)? perhaps in a new release? thanks Link to comment Share on other sites More sharing options...
hannibal Posted March 27, 2009 Share Posted March 27, 2009 hello I Need Help. i was able to run LOVP ok, when running a local session mission... but it doesnt seem to work when i join a networked session via hyperlobby.... i tried out the 51st server... WHAT AM I DOING WRONG??? find me on steam! username: Hannibal_A101A http://steamcommunity.com/profiles/76561197969447179 Link to comment Share on other sites More sharing options...
Aeroscout Posted March 27, 2009 Share Posted March 27, 2009 To prevent cheating, servers turn off .lua export. This panel needs lua export to work and thus won't work online. Sorry to burst your bubble. DCS Wishlist: 1) FIX THE DAMN RIVERS!!! 2) Spherical or cylindrical panorama view projection. 3) Enhanced input options (action upon button release, etc). 4) Aircraft flight parameter dump upon exit (stick posn, attitude, rates, accel, control volume, control-surface positions, SAS bias, etc). 5) ADS-33 maneuver courses as static objects. 6) Exposed API or exports of trim position and stick force for custom controllers. 7) Select auto multiple audio devices Link to comment Share on other sites More sharing options...
GGTharos Posted March 27, 2009 Share Posted March 27, 2009 Not to mention using the US RWR with the red birds is just ... gauche. [sIGPIC][/sIGPIC] Reminder: SAM = Speed Bump :D I used to play flight sims like you, but then I took a slammer to the knee - Yoda Link to comment Share on other sites More sharing options...
Recommended Posts