gregzagk Posted February 1, 2018 Share Posted February 1, 2018 Hello all, As DCS 2.5 version is out, I would like to inform you about the campaign status. With the new Caucasus terrain and the updates to the Huey engine performance, the campaign needed many changes to make it playable again. This is totally worthy though as I am sure you will all love all these new features that ED released (not only the graphics). The campaign was massively tested before its initial release back on April and by that way we fortunately avoided bugs in triggers etc. Unfortunately the available free time decreased a lot since then and I am expecting to face some issues at start that may missed out. Howerer I will try to provide fixes asap and get it back soon to its prior status. As a temporary solution in case you face any issues, I added a "Skip mission" option that you can select through the F10 radio menu at mission start. Thanks and have fun! Greg "ARGO" DCS UH-1H DLC SP Campaign 373vFS DCS World squadron (Greece) - www.buddyspike.net "ARGO 2.0 Project Phoenix" UH-1H DLC Campaign - WIP Link to comment Share on other sites More sharing options...
Sydy Posted February 3, 2018 Share Posted February 3, 2018 Tks a lot for the update! Link to comment Share on other sites More sharing options...
QuiGon Posted February 3, 2018 Share Posted February 3, 2018 Thanks a lot for the all the efforts greg! I can imagine how annoying it must be for campaign creators to keep updating campaigns because of changes in the game! Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit DCS Panavia Tornado (IDS) really needs to be a thing! Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 3, 2018 Share Posted February 3, 2018 As long as we need to update because the game is getting improved, it is not that bad. But knowing how much more demanding are new maps for helo campaigns (unit / bases placement is crucial and affected by map changes much more) I don’t envy Greg.. but I am sure once all is up to speed with new Caucasus it will feel like a completely new campaign! Link to comment Share on other sites More sharing options...
Ala13_Kokakolo Posted February 4, 2018 Share Posted February 4, 2018 (edited) Mission 1, No problems. Mission 2, No problems but Kobuleti NDB does not work (tested in another map. It woks in 2.5, but not on this mission strangely) Mission 3, it does not allow the mission to load, it says "f4E module missing" or smth like it. (I will keep trying all missions through the single mission) Edited February 4, 2018 by Ala13_Kokakolo Link to comment Share on other sites More sharing options...
bacongrabber Posted February 4, 2018 Share Posted February 4, 2018 Same Here... Mission 1, No problems. Mission 2, No problems but Kobuleti NDB does not work (tested in another map. It woks in 2.5, but not on this mission strangely) Mission 3, it does not allow the mission to load, it says "f4E module missing" or smth like it. (I will keep trying all missions through the single mission) I have the same results as you, though 2.5 fixed a crash in the first mission in 1.5. Looking forward to the updated campaign. Link to comment Share on other sites More sharing options...
Ganesh Posted February 6, 2018 Share Posted February 6, 2018 Had waitet until 2.5 to fly your campaign Greg. Now im getting in... Any chance to replace the old oilrigs with the new detailed ones which already exist in the sim? Please :) regards Ganesh She: "Your orders from ED have reached a total amount of $871,88 and your hardware expenses are countless..." Me: "I can´t invest my money much better until i wait for Germanys Next Top Model": The Bo-105 PAH1A1 + Vulkan & continuous work on multithread & VR optimization! Asus Z490E - 10900k@5,3GHz - 64GB 3600 DDR4 - 4090FE - Reverb G2 - MFG Crosswinds +DamperMod - Selfmade TableMounts - Centered VirPil T-50 Base with 20cm Extension - TM Warthog & Hornet Grip - TM Throttle +SlewMod - Pimped MSFFB2 for Huey - JetSeat SE on a sawn out office Chair - PointCTRL Link to comment Share on other sites More sharing options...
SnowTiger Posted February 6, 2018 Share Posted February 6, 2018 Had waitet until 2.5 to fly your campaign Greg. Now im getting in... Any chance to replace the old oilrigs with the new detailed ones which already exist in the sim? Please :) Unfortunately, the New Oil Rig are not models that can be placed in ME. We still have the old offshore rigs to place in ME. I don't know if this is something ED intends to create as a static object that we can use or not. I guess time will tell. SnowTiger:joystick: Link to comment Share on other sites More sharing options...
Ganesh Posted February 10, 2018 Share Posted February 10, 2018 (edited) Ok, didn´t know. But i really hope Greg solves also the "problem" with the updated EGT limitation which makes it actual almost unplayable. https://forums.eagle.ru/showthread.php?t=199388 Apart from these real problems, it would be a great campaign which i bought especially to celebrate 2.5 Edited February 11, 2018 by Ganesh regards Ganesh She: "Your orders from ED have reached a total amount of $871,88 and your hardware expenses are countless..." Me: "I can´t invest my money much better until i wait for Germanys Next Top Model": The Bo-105 PAH1A1 + Vulkan & continuous work on multithread & VR optimization! Asus Z490E - 10900k@5,3GHz - 64GB 3600 DDR4 - 4090FE - Reverb G2 - MFG Crosswinds +DamperMod - Selfmade TableMounts - Centered VirPil T-50 Base with 20cm Extension - TM Warthog & Hornet Grip - TM Throttle +SlewMod - Pimped MSFFB2 for Huey - JetSeat SE on a sawn out office Chair - PointCTRL Link to comment Share on other sites More sharing options...
StefVR Posted February 14, 2018 Share Posted February 14, 2018 Cant start mission3: Need module for mission F-4E by Belsimtek. Great 2 first missions tho. Super immersive in VR in DCS 2.5. Link to comment Share on other sites More sharing options...
SnowTiger Posted February 14, 2018 Share Posted February 14, 2018 There is no current F-4E Mod that I'm aware of ... by Belsimtek or anyone else. Maybe they are producing one but none that are currently available. That said, if an F-4E is in the mission, it is an AI only. SnowTiger:joystick: Link to comment Share on other sites More sharing options...
gregzagk Posted February 14, 2018 Author Share Posted February 14, 2018 It should work after today's update. Please let me know if not but it's ok on my side so far. Greg "ARGO" DCS UH-1H DLC SP Campaign 373vFS DCS World squadron (Greece) - www.buddyspike.net "ARGO 2.0 Project Phoenix" UH-1H DLC Campaign - WIP Link to comment Share on other sites More sharing options...
bacongrabber Posted February 15, 2018 Share Posted February 15, 2018 Well the mission loads OK but due to all the weight of the fuel, ammo and cargo, I quickly get an engine fire. If I try to get translational lift the cargo jumps around as if it is attached by an elastic band. I think these are DCS update issues, which is a shame because the campaign is great. Maybe the mission could be split up into smaller missions? (probably a huge task). Anyone else had more success than me? John. Link to comment Share on other sites More sharing options...
rge75 Posted February 16, 2018 Share Posted February 16, 2018 (edited) The fire was no problem to me even though I had to exceed the EGT up to 700° to lift it. Once gaining speed, I also have the "jumping cargo" problem though...looks like a general sling load glitch to me? I think I flew straight with no input to the cyclic/collective, but the cargo starts to swing more and more until it unhooks (see video) Maybe it should be reported in the bug section? Anybody managed to successfully sling load cargo so far? Edited February 16, 2018 by rge75 My DCS videos https://www.youtube.com/channel/UCJX2av4UE4xqWto3y8EZWMw [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Ganesh Posted February 16, 2018 Share Posted February 16, 2018 I think I flew straight with no input to the cyclic/collective, but the cargo starts to swing more and more until it unhooks (see video) Maybe it should be reported in the bug section? Anybody managed to successfully sling load cargo so far? Holy perpetuum mobile :shocking: BST should fix this! regards Ganesh She: "Your orders from ED have reached a total amount of $871,88 and your hardware expenses are countless..." Me: "I can´t invest my money much better until i wait for Germanys Next Top Model": The Bo-105 PAH1A1 + Vulkan & continuous work on multithread & VR optimization! Asus Z490E - 10900k@5,3GHz - 64GB 3600 DDR4 - 4090FE - Reverb G2 - MFG Crosswinds +DamperMod - Selfmade TableMounts - Centered VirPil T-50 Base with 20cm Extension - TM Warthog & Hornet Grip - TM Throttle +SlewMod - Pimped MSFFB2 for Huey - JetSeat SE on a sawn out office Chair - PointCTRL Link to comment Share on other sites More sharing options...
rge75 Posted February 16, 2018 Share Posted February 16, 2018 (edited) Yeah, I decided to report it in the general DCS 2.5 Open Beta bug section. It reminds me of the Tacoma bridge which was swinging more and more until it collapsed... Edited February 17, 2018 by rge75 typo mistake My DCS videos https://www.youtube.com/channel/UCJX2av4UE4xqWto3y8EZWMw [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Ala13_Kokakolo Posted February 16, 2018 Share Posted February 16, 2018 Kobuleti NDBs do not work, neither of them. They work in 2.5, I checked on an empty map and both work, they just do not work on this campaign Mission 3: Cargo swings unincontrollaby however smooth you fly. Link to comment Share on other sites More sharing options...
Airweenieunit1 Posted February 17, 2018 Share Posted February 17, 2018 Mission 2 bug, or poor engine management? Keep having an error at the beginning of Mission 2. I collect all the sailors from the sub then quickly fly towards the hospital. 3 times now I'm halfway there and a get a chirp on my comms and a message saying "you've damaged the aircraft, mission failure" seconds later we are all a ball of debris on the ground. Don't think I ever had this issue when I played the mission in 1.5 Link to comment Share on other sites More sharing options...
Ganesh Posted February 17, 2018 Share Posted February 17, 2018 Keep having an error at the beginning of Mission 2. I collect all the sailors from the sub then quickly fly towards the hospital. 3 times now I'm halfway there and a get a chirp on my comms and a message saying "you've damaged the aircraft, mission failure" seconds later we are all a ball of debris on the ground. Don't think I ever had this issue when I played the mission in 1.5 I think your engine went up in flames and exploded. Keep your EGT within the limits. This wasnt implemented when you flew it last time. regards Ganesh She: "Your orders from ED have reached a total amount of $871,88 and your hardware expenses are countless..." Me: "I can´t invest my money much better until i wait for Germanys Next Top Model": The Bo-105 PAH1A1 + Vulkan & continuous work on multithread & VR optimization! Asus Z490E - 10900k@5,3GHz - 64GB 3600 DDR4 - 4090FE - Reverb G2 - MFG Crosswinds +DamperMod - Selfmade TableMounts - Centered VirPil T-50 Base with 20cm Extension - TM Warthog & Hornet Grip - TM Throttle +SlewMod - Pimped MSFFB2 for Huey - JetSeat SE on a sawn out office Chair - PointCTRL Link to comment Share on other sites More sharing options...
funkyfranky Posted February 17, 2018 Share Posted February 17, 2018 It reminds me of the Tacoma bridge which was swinging more and more until it collapsed... Cool, you found a resonance :) A warrior's mission is to foster the success of others. i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2 RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss Link to comment Share on other sites More sharing options...
Recommended Posts