Jump to content

VAICOM PRO plugin for VoiceAttack


Hollywood_315

Recommended Posts

The plugin default TX radio mapping uses slot assignments based on certain business logic.

Example: FM radio -> slot 3 (TX3), UHF -> slot 2 (TX2), single radio -> slot 2 (TX2), etc.

The plugin also displays the radio device names as used internally in DCS.

See page 12 of the manual.

 

However the above slots assignment is not the same as the one used by SRS.

For some modules e.g. your UHF radio may be on TX2 in VAICOM PRO but in radio 1 slot in SRS.

 

When SRS mapping mode is selected in the plugin, the slot placement and radio names are the same as used by SRS.

This means that TX1 always corresponds to SRS radio1, TX2 = SRS radio 2, TX3 = SRS radio 3.

This is for all modules. So this should make it easier to get a universal PTT setup on your rig.

 

Best tried out in practise. Hope it clarifies somewhat :D

Cheers

There is no spoon.

 

Avatar_old_80x80.gif.0c105925ce4b9f5b87697ea37cbde317.gif

VAICOM PRO plugin for DCS World

www.vaicompro.com

Link to comment
Share on other sites

+5 as well. The app is amazing. Any issues have been answered and dealt with promptly. Money well spent!

 

Anyone use it while online using SRS at the same time? I want to play online more but not sure how they jive together. I suppose if a tanker I want to talk to is on a different frequency than the frequencies used for simple radio it wouldn't be an issue right? I wouldn't want everyone listening to me say "ready pre contact" a million times in the middle of a fight.

 

Cheers keep up the great work!

I've used both together and they coexist just fine. However I'm usually using simple coms, a single PTT button, but use separate PTT setups for each rather than try to use the same keys/buttons. That avoids the problem of having others on SRS hear me talking to the AI, but at the cost of some realism. After all, if others don't want to hear you talking to the tanker then they should get off the tanker frequency, just as in RL.

I'm Softball on Multiplayer. Dell XPS-8500 24GB, i7-3770@3.40GHz, Win 10Pro, Nvidia GeForce GTX 1060 6GB, TiR, VKB Gunfighter III with MCG Ultimate grip, CH throttle and pedals, all maps, most modules

Link to comment
Share on other sites

Wow that's awesome guys, thanks for your support. What a great community this is :)

 

@emc A lot of prep work has already gone into the RIO extension.

I cannot confirm a release date yet but will share more info as it becomes available.

Exciting times..

 

@Darcwaynard Latest version 2.5.8 has a new SRS mapping feature for PTT, make sure to check that out.

I'm eager to hear back on how VAICOM and SRS are used together in MP practise,

suggestions in that area are always welcome.

 

@ibanexgreg Well all looks normal here with latest OpenBeta, it could be you have

some install snag. Have you tried using the Custom Folder option (with ob flag)?

Have a look and PM me if you get stuck.

@ibanexgreg Well all looks normal here with latest OpenBeta, it could be you have

some install snag. Have you tried using the Custom Folder option (with ob flag)?

Have a look and PM me if you get stuck.

 

 

PM Sent

Link to comment
Share on other sites

I have a problem when using the HUEY. With all other modules it's ok.

 

I have set TX1, 2, 3, 4 and I use the Single, on TX4 and right switch is on OPER. I also use SRS and Teamspeak

 

When I fly the Huey, after setting the radion for example on 134.000 after a minute or 2, the Mic will open on it's own on that frequency and stay open Mic.

 

The buttons used for TX 1, 2 and 3 are the same as the ones I use in SRS and as I'm set to single, I don't really use them in Vaicomm, only TX4 to interact with Vaicomm.

 

I have set a additional PTT on a separate button for the Huey and if I presss it it will close the open MIC or open it as it should do. Again, after a few seconds/minutes of inactivity with the Comms, it will go open MIC again on its own.

 

Any idea how to stop the MIC to open on its own ?

Win 10 | i7 8700 Coffee Lake OC @ 4.9Ghz | 32Go Ram | 1080Ti | DCS on SSD | Thrustmaster HOTAS Warthog | Saitek Rudder | TrackIr 5 Pro

Link to comment
Share on other sites

On page 22 of the latest manual, it states that SRS PTT mapping: maps the PTT TX slots according to the radio layout used by the SRS software. Could someone explain this a little clearer for my thick skull. For the F18 module, I have TX1 button 4 set to Comm 2 and TX 3 button 6 set to Comm 1. On my joystick, I have 2 buttons set for SRS 1 and 2.


Edited by sobe

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

I am sorry but I get my DCS comm menu flashing-blinking. a real pain.

 

I have tried

but it didn't solve my issue,

 

any idea ?

[sIGPIC]https://forums.eagle.ru/signaturepics/sigpic70550_3.gif[/sIGPIC]

Asus Z390-H - SSD M.2 EVO 970 - Intel I9 @5.0ghz - 32gb DDR4 4000 - ZOTAC 2080ti AMP Extreme Core - Cougar FSSB + Cougar NN_Dan + HOTAS Warthog + Virpil WRBRD + Hornet Stick - Thrustmaster TPR Pedals - Track IR5

Link to comment
Share on other sites

Hollywood,

 

I am enjoying Vaicom but I think I did something wrong. As I am not a native English speaker (living in the US for 20 years) I decided to teach the speech recognition engine my voice and dialect.

So I went through all 470 words. Some of them I don't know how to pronounce like the Georgian names. But when I was doing it if the Windows did not understand me it would pop up this window as if it was trying to interpret this word outside the DCS realm. For example, D-link Targets by type it would want to start typing. There were several more.

 

When I looked at the profile tonight I saw that I have 978 commands and every command has a multipart, for every command, there is a short cut. I have attached a screenshot for you.

 

The reason I went back in tonight was that it would not recognize the word two as my wingman in game. When going through the speech training tool it recognized it with 95% accuracy. And One last point whenever I use TX1 it shows Joystick : "AAA" see screenshot.

 

I just realized I have to tell you one thing, I installed Voiceattack and Vaicom under DCS Stable. Then I installed Beta, can that be the reason why I have double the commands?

 

Thank you!!!

 

Peter

417060686_voiceattackscreen.jpg.67ee8f2000a39756ae9f120bd500e582.jpg

1682974336_vaicomprofile.thumb.jpg.ed62e4c2cfc40cbd94c13be3192dc683.jpg


Edited by DutchCoolHand

AMD RYZEN 7 2700 / 32GB / RTX2070 / 500GB M.2 with Windows and DCS / 2 - 500GB SSD / Rift S/ TM Warthog with F18 stick and Virpil WarBRD / Foxx Mounts/ MFG Crosswind rudders + 3 MFD's | Now enjoying VR with PointCTRL controllers + Gamematrix JetSeat

Link to comment
Share on other sites

Hi Hollywood,

 

I have the following problem in DCS.

 

If I give the command 'Place the Wheelchocks' nothing happens in DCS.

 

Even resetting the Key Comands doesn't work.

 

Brgrds

Warblade

 

Gesendet von meinem SM-G935F mit Tapatalk

 

+1 I'm having the same problem, tried just about eveything.


Edited by Outlaw24
double posting

 

 

Spoiler:

MSI 390 Carbon Pro, i7 9700K @ 4.9, Noctua NH-U14S, 32GB DDR4, MSI RTX 2080ti, Thrustmaster Warthog Throttle, VKB Gunfighter Mklll Pro, MCG Pro, MFG Crosswind Pedals, UTC MK II Pro, Dell AW3418DW Gsync monitor, 970 Pro M2 1TB (for DCS), Playseat Air Force Seat, KW-980 Jetseat, Vaicom Pro, 3X TM Cougar with Lilliput 8" screens.Tek Creations panels and controllers.

 

Link to comment
Share on other sites

I am getting an error listed below, anyone knows how to fix it?

 

UNABLE TO INVOKE PLUGIN, 'VAICOM PRO 2.5. DUE TO EXCEPTION: Could not load file or assembly 'RIO, Version=2.5.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.

 

 

-oz

Link to comment
Share on other sites

I am sorry but I get my DCS comm menu flashing-blinking. a real pain.

 

I have tried

but it didn't solve my issue,

 

any idea ?

 

 

Aparently this happens after a DCS update like we just had yesterday.

You can solve it by going to your VAICOM configuration (Ctrl, Alt, C), then to the Reset TAB, and reset only the LUA Code. It should fix it.


Edited by lxsapper
Spelling and format.
Link to comment
Share on other sites

Aparently this happens after a DCS

update like we just had yesterday.

You can solve it by doing to your VAICOM configuration (Ctrl, Alt, C), then to the Reset TAB, and reset only the LUA Code. It should fix it.

 

Thanks! This really helped me out...

i9 10900KF,RTX 2080 Ti,32GB RAM.2TB SSD M.2 ,Windows 10.Thrustmaste Warthog,Track5 with default settings

Link to comment
Share on other sites

@Hollywood

minor issue at reset tab tooltip for theme checkbox is wrong - reset lua code ;)

Take a look my mods :joystick:

dcs_icons_32.png

CPU: i7 7700 | GPU: GeForce GTX 1080 8GB DDR5 | Motherboard: ASUSTeK PRIME B250M-A | RAM: 2x16GB DDR4-2400 | Output: Kingston HyperX Cloud II | Edifier C2XD 2.1 |

Controlls: Saitek X-56 Rhino | Saitek Flight Rudder Pedals | Saitek Multi/Radio/Switch Panels | Thrustmaster MFD Cougar | Logitech G13 | OpenTrack with LaserClip | VoiceAttack with VAICOM Pro plugin

Link to comment
Share on other sites

@Dutch There's something wrong with your profile: try re-importing from the Profiles subfolder.

@Oz PM sent.

@warblade @leysard @emc Thanks for flagging: fixed in next update.

@all Update 2.5.8.1 -in a day or two- will also include a new feature: chatter sound control (volume and panning).

:joystick:

There is no spoon.

 

Avatar_old_80x80.gif.0c105925ce4b9f5b87697ea37cbde317.gif

VAICOM PRO plugin for DCS World

www.vaicompro.com

Link to comment
Share on other sites

@Dutch There's something wrong with your profile: try re-importing from the Profiles subfolder.

 

@Oz PM sent.

 

@warblade @leysard @emc Thanks for flagging: fixed in next update.

 

@all Update 2.5.8.1 -in a day or two- will also include a new feature: chatter sound control (volume and panning).

 

:joystick:

Hi Hollywood,

 

Many Thanks for your Support and Update.

 

Best wishes for your comming Weekend.

 

Brgrd

Warblade

 

Gesendet von meinem SM-G935F mit Tapatalk

Link to comment
Share on other sites

Having started VAICOM after about a month away from DCS, I'm no longer getting any kind of response from my voice commands.

When I press the PTT button is says "listening", but VAICOM or Voice Attack doesn't seem to hear me at all.

I've checked that my microphone is working and that the correct device is selected.

 

What could be the problem here?

PC Specs / Hardware: MSI z370 Gaming Plus Mainboard, Intel 8700k @ 5GHz, MSI Sea Hawk 2080 Ti @ 2100MHz, 32GB 3200 MHz DDR4 RAM

Displays: Philips BDM4065UC 60Hz 4K UHD Screen, Pimax 8KX

Controllers / Peripherals: VPC MongoosT-50, Thrustmaster Warthog HOTAS, modded MS FFB2/CH Combatstick, MFG Crosswind Pedals, Gametrix JetSeat

OS: Windows 10 Home Creator's Update

Link to comment
Share on other sites

@Boris. I had same problem at first and I solved it by putting confidence level from 85 as recommended to around 20... but I am not native english speaker. Also check if the microphone is not set in windows setting to ignore your voice in privacy tab.

 

@Hollywood_315

 

I have a small issue with some instructions... after some update I got a message to update the commands by simply pressing FINISH somewhere... I pressed but it wasn't really finished and it said this (see attachment) and I really don't understand what is suppose to mean.

Clipboard01.thumb.jpg.161eabe3f7d95e7ba2ea4ca0403a4647.jpg

[sIGPIC][/sIGPIC]

I5 4670k, 32GB, GTX 1070, Thrustmaster TFRP, G940 Throttle extremely modded with Bodnar 0836X and Bu0836A,

Warthog Joystick with F-18 grip, Oculus Rift S - Almost all is made from gifts from friends, the most expensive parts at least

Link to comment
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...