Tominez Posted April 10, 2017 Share Posted April 10, 2017 Sorry guys, anyone know the reason why, both with DCS 2.0 and 1.5.6, no radio menu is displayed after the command "leftShift + Num+", which is the command specified in the list of controls for M2000 C ?? Link to comment Share on other sites More sharing options...
The_Tau Posted April 10, 2017 Share Posted April 10, 2017 (edited) I already told you, did u tried "" key? Did u turned radios on? (Do you have selected frequencies displayed in little screen on right side of Autopilot or do you got dashes) Edited April 10, 2017 by The_Tau Tau's Youtube channel Twitch channel https://www.twitch.tv/the0tau Link to comment Share on other sites More sharing options...
Tominez Posted April 11, 2017 Author Share Posted April 11, 2017 Thanks. Yes, I did. UHF an VHF radio are on and frequencies correctly set. However, thr communicaton menu does not appear. This happen only with the M2000C. With the A10C everything is working well. I've really no idea on what to do. ...... Link to comment Share on other sites More sharing options...
baltic_dragon Posted April 11, 2017 Share Posted April 11, 2017 I think you have to use the commands in the HOTAS section and either select UHF or V/UHF one. Don't have the DCS here, but there are two different key bindings for two different radios. Link to comment Share on other sites More sharing options...
Tominez Posted April 11, 2017 Author Share Posted April 11, 2017 Will try and revert. Thanks a lot for the moment Link to comment Share on other sites More sharing options...
AG-51_Razor Posted April 11, 2017 Share Posted April 11, 2017 I use the "" key for the primary radio and LALT + KP - for the secondary radio - that would be the upper and lower freqs on the panel. I get a radio menu for each one. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Tominez Posted April 12, 2017 Author Share Posted April 12, 2017 Thanks RAZOR. I will try also to change my set command on the keyboard, but I do not think it depends from that. If I use the same command (LeftShift + Num+) with DCS 1.5 Beta, it works, the VHF Radio menu appears, while with DCS 2, with Vegas terrain, it does not work. There should be something wrong in some.lua file maybe. Link to comment Share on other sites More sharing options...
Aerovenator Posted April 21, 2017 Share Posted April 21, 2017 I have a different problem wit my radios in DCS 1.5.6 release. At the beginning both are accessible with their specific keybind set. But after I use the UHF radio (red), it seems that I cannot use the V/UHF Radio anymore. Everytime I press the button it also states "UHF radio" in the comms menu and although I set the right channel on green, the ATC is not responding anymore. Any ideas? I7-9700K -- 32GB RAM -- RTX 4070 -- Virpil T-50CM3 Throttle + WarBRD Base -- Thrustmaster TPR -- Quest 3 Link to comment Share on other sites More sharing options...
Recommended Posts