Badhorsie53 Posted April 2, 2017 Share Posted April 2, 2017 Yes, I get same result with AP. Also for some Reason in DCS 2.0.5.3521 verus DCS 1.5.1938 the A-10 seems tail heavy all the time and flies strange versus 1.5 where it flies just fine. Has something maybe change in the model or flight dynamics for 2.0? Spoiler System Specs: MB - MSI ACEX570S, AMD 5950X, 64GB 3600 NEO RAM, 3090 TI 24GB __ A-10C2 Wisconsin 176th (TFS) 128th (TFW) - Repaint Link to comment Share on other sites More sharing options...
Tinkickef Posted April 2, 2017 Share Posted April 2, 2017 Same here in 2.05. Engage ALT HLD even when straight and level induces ever more violent oscillations. Both other functions are fine. System spec: i9 9900K, Gigabyte Aorus Z390 Ultra motherboard, 32Gb Corsair Vengeance DDR4 3200 RAM, Corsair M.2 NVMe 1Tb Boot SSD. Seagate 1Tb Hybrid mass storage SSD. ASUS RTX2080TI Dual OC, Thermaltake Flo Riing 360mm water pumper, EVGA 850G3 PSU. HP Reverb, TM Warthog, Crosswind pedals, Buttkicker Gamer 2. Link to comment Share on other sites More sharing options...
Wilbur1340 Posted April 3, 2017 Share Posted April 3, 2017 Same here. I had no idea what was going on. Latest 1.5. Link to comment Share on other sites More sharing options...
Keen Posted April 3, 2017 Share Posted April 3, 2017 I have experienced this yesterday too. Link to comment Share on other sites More sharing options...
Scotch75 Posted April 3, 2017 Author Share Posted April 3, 2017 Well, the last time I checked dcs world 1.5 before this latest update the ALT HOLD worked fine. I think this latest 1.5 update has copied the bug in from dcs world 2.0. I haven't had a chance to update to the latest 1.5 and confirm. Sent from my SM-G900I using Tapatalk W10 Home 64Bit, Intel Skylake I5 6600K 3.50GHz, ASUS ROG Stryx Z270F MoBo, 32GB G.Skill RipJaws V DDR4 3200 RAM, Samsung 960 Pro 512GB M.2 SSD (OS), Samsung 850 Pro 512GB SSD, 2TB Seagate SDHD, 2TB WD Green HDD, GALAX GTX GeForce 1070 EXOC Sniper White 8GB VRAM Link to comment Share on other sites More sharing options...
Crashmo Posted April 3, 2017 Share Posted April 3, 2017 I just loaded the update: 2.0.5.3521.198 (The latest). Now if I carefully trim up before engaging in ALT mode, AND over 20° bank it holds fine. I tried 10° bank and it was much less pronounced than before, but still there. :glare: Acchhh! This was my way to gather targets in the TGP. Sadly, no more. Link to comment Share on other sites More sharing options...
majapahit Posted April 3, 2017 Share Posted April 3, 2017 [REPORTED]/[MERGED] Roll Oscillation w/ AP Alt Hold - 1.5.6.3690.269 Weird rolling in Alt Hold at a bank since latest 1.5.6.3690.269 I noticed this when trying to 'circle' whilst banking an area of engagement, with wind and weapons A10C cannot even hold autopilot, it gets really weird. Attached a track 0 wind, after a minute you can see the 'wave' rolling like if you're in a sailing vessel at sea. Bug .. ? I see from another thread this bug might have been introduced from DCS 2.xx Please fix, it's horrible (maybe DCS wanted to improve realism, but this would be a tad over the edge?)ossilateAltHold.trk | VR goggles | Autopilot panel | Headtracker | TM HOTAS | G920 HOTAS | MS FFB 2 | Throttle Quadrants | 8600K | GTX 1080 | 64GB RAM| Win 10 x64 | Voicerecognition | 50" UHD TV monitor | 40" 1080p TV monitor | 2x 24" 1080p side monitors | 24" 1080p touchscreen | Link to comment Share on other sites More sharing options...
al531246 Posted April 3, 2017 Share Posted April 3, 2017 Can confirm, having this myself. It was also raised on hoggit, here's a video someone posted; Intel i5-8600k | EVGA RTX 3070 | Windows 10 | 32GB RAM @3600 MHz | 500 GB Samsung 850 SSD Link to comment Share on other sites More sharing options...
noisy_lightning Posted April 4, 2017 Share Posted April 4, 2017 I had this last night as well, thought it was my setup for a short while. Sent from my ONEPLUS A3003 using Tapatalk Link to comment Share on other sites More sharing options...
steve303rd Posted April 4, 2017 Share Posted April 4, 2017 Same for me Saturday night. Link to comment Share on other sites More sharing options...
escaner Posted April 4, 2017 Share Posted April 4, 2017 I can confirm this bug in current 1.5. Last Tuesday was OK, so it was introduced in the latest patch. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
xoxen Posted April 5, 2017 Share Posted April 5, 2017 (edited) Just did a MP flight. The three of us all had the same issue wit the AP. Latest Patch. Edit: No issues in 1.5. Latest patch as well. Edited April 7, 2017 by xoxen AMD Ryzen 7 5800X3D, MSI MPG X570 Gaming Plus, 64GB Crucial Ballistix DDR4-3600 CL16, Asus TUF Gaming RTX 4080 OC, Windows 10 64bit Home Premium, TrackIR 5 with TrackClip: Pro!, Virpil MongoosT-50CM3 Base + TM Warthog Stick + 7cm extension + WINWING Orion 2 with F-15EX grips, Cougar MFDs with 8" displays, Saitek Rudder Pedals, Samsung Odyssey G9 49" 5120x1440 @120 Hz Link to comment Share on other sites More sharing options...
Zilch Posted April 6, 2017 Share Posted April 6, 2017 Another confirmation. The ALT HOLD system causes increasing oscillations until the plane departs from control. Is this a new experiment in negative dynamic stability in the Hog? ;) [sIGPIC][/sIGPIC] Zilch79's YouTube Channel: Link to comment Share on other sites More sharing options...
SuperSix2 Posted April 7, 2017 Share Posted April 7, 2017 (edited) Now it's in stable as of 07/04 with lastest update. Engage ALT Hold in a bank or level flight and immediately begins a dutch roll. Edited April 7, 2017 by SuperSix2 Link to comment Share on other sites More sharing options...
majapahit Posted April 7, 2017 Share Posted April 7, 2017 Now it's in stable as of 07/04 with lastest update. Engage ALT Hold in a bank or level flight and immediately begins a dutch roll. THX | VR goggles | Autopilot panel | Headtracker | TM HOTAS | G920 HOTAS | MS FFB 2 | Throttle Quadrants | 8600K | GTX 1080 | 64GB RAM| Win 10 x64 | Voicerecognition | 50" UHD TV monitor | 40" 1080p TV monitor | 2x 24" 1080p side monitors | 24" 1080p touchscreen | Link to comment Share on other sites More sharing options...
Emmy Posted April 7, 2017 Share Posted April 7, 2017 4/7/17: Latest update appears to have improved this issue greatly. Flight model is much, much less spongy as well. [sIGPIC][/sIGPIC] http://www.476vfightergroup.com/content.php High Quality Aviation Photography For Personal Enjoyment And Editorial Use. www.crosswindimages.com Link to comment Share on other sites More sharing options...
SuperSix2 Posted April 7, 2017 Share Posted April 7, 2017 4/7/17: Latest update appears to have improved this issue greatly. Flight model is much, much less spongy as well. Is this in Alpha? Because in Stable thats not the case. Link to comment Share on other sites More sharing options...
SkateZilla Posted April 7, 2017 Share Posted April 7, 2017 I can confirm, in current 1.5. Its also been reported internally. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
SuperSix2 Posted April 7, 2017 Share Posted April 7, 2017 Just tried Alpha and bug still present of severe dutch rolling with ALT hold on also Link to comment Share on other sites More sharing options...
Emmy Posted April 7, 2017 Share Posted April 7, 2017 Just tried Alpha and bug still present of severe dutch rolling with ALT hold on also Yeah... :( With a clean jet, it's much less pronounced but hang stores on it and it still does it... Flight model is better though. Closer to 1.5 than the spongy mess it had been. [sIGPIC][/sIGPIC] http://www.476vfightergroup.com/content.php High Quality Aviation Photography For Personal Enjoyment And Editorial Use. www.crosswindimages.com Link to comment Share on other sites More sharing options...
gghelli Posted April 8, 2017 Share Posted April 8, 2017 Just played 7 April Update DCS 1.5.6.3930, ALT HLD is unstable, it starts divergent rolls. Please fix the problem, it's really hard to set CDU coordinates from 9-line without its help. Link to comment Share on other sites More sharing options...
plexi Posted April 8, 2017 Share Posted April 8, 2017 Yes have noticed Auto Pilot in Alt Hold the Aircraft starts to oscillate slowly at first then progresses into more violent Yaw left to right. Only since this latest update (Yesterday 8/4/17) Link to comment Share on other sites More sharing options...
majapahit Posted April 8, 2017 Share Posted April 8, 2017 (edited) Yes have noticed Auto Pilot in Alt Hold the Aircraft starts to oscillate slowly at first then progresses into more violent Yaw left to right. Only since this latest update (Yesterday 8/4/17) weird because in my 1.5.6.3930.271 april 7 it was 'fixed', but for, indeed, a slight rolling after a minute or so (which DCS put in because it's 'real'? and too much of it in error?) but nothing compared to the uncontrollable roll of the last update before, and actually now perhaps accurate? ? EDIT: oops / with heavy load it's back again (tested previously with no or small load) ! Edited April 9, 2017 by majapahit | VR goggles | Autopilot panel | Headtracker | TM HOTAS | G920 HOTAS | MS FFB 2 | Throttle Quadrants | 8600K | GTX 1080 | 64GB RAM| Win 10 x64 | Voicerecognition | 50" UHD TV monitor | 40" 1080p TV monitor | 2x 24" 1080p side monitors | 24" 1080p touchscreen | Link to comment Share on other sites More sharing options...
Coxy_99 Posted April 8, 2017 Share Posted April 8, 2017 A10C Autopilot Autopilot Its just not working, Im pretty noob to the A10C, But you go to put it in an orbit and its all over the place, Not sure if its been reported yet, But its useless to me :) This is in OB Link to comment Share on other sites More sharing options...
Coxy_99 Posted April 8, 2017 Share Posted April 8, 2017 Dont matter i found a thread, Mine does it in OB also. Link to comment Share on other sites More sharing options...
Recommended Posts