Panzerfan Posted January 28, 2017 Share Posted January 28, 2017 As said in the title, i can turn on the kneeboard but can't switch between the pages. Not with the keyboard nor with the joystick button i assigned it to. Which is quite annoying because i can't look up target QFEs and airport codes On a related note: if i manually enter waypoints via flight computer, will the QFEs of those waypoints be displayed on the kneeboard as well? Link to comment Share on other sites More sharing options...
NeilWillis Posted January 28, 2017 Share Posted January 28, 2017 No problems with this for me. Link to comment Share on other sites More sharing options...
Fishbreath Posted January 28, 2017 Share Posted January 28, 2017 On a related note: if i manually enter waypoints via flight computer, will the QFEs of those waypoints be displayed on the kneeboard as well? Nope. You'll have to guesstimate for manually-entered things. I've seen a bug where cycling the kneeboard backward yields a transparent texture and doesn't go any further, but haven't seen the kneeboard straight-up stuck. Black Shark, Harrier, and Hornet pilot Many Words - Serial Fiction | Ka-50 Employment Guide | Ka-50 Avionics Cheat Sheet | Multiplayer Shooting Range Mission Link to comment Share on other sites More sharing options...
Panzerfan Posted January 28, 2017 Author Share Posted January 28, 2017 Nope. You'll have to guesstimate for manually-entered things. I've seen a bug where cycling the kneeboard backward yields a transparent texture and doesn't go any further, but haven't seen the kneeboard straight-up stuck. Yes, I'll try it in the sable release. but also in the menu, when I press the corresponding buttons it doesn't switch to the option. And it's not a broken keyboaed or joystick, I tested that and it worked flawlessly Link to comment Share on other sites More sharing options...
grunf Posted January 28, 2017 Share Posted January 28, 2017 As said in the title, i can turn on the kneeboard but can't switch between the pages. Not with the keyboard nor with the joystick button i assigned it to. I can confirm, I've seen it happen once. I couldn't turn the pages until I restarted DCS. Link to comment Share on other sites More sharing options...
Panzerfan Posted January 28, 2017 Author Share Posted January 28, 2017 Ok, I tested it in 1.5.5 and it worked flawless, but in 1.5.6 it doesn't Link to comment Share on other sites More sharing options...
tob.s Posted January 28, 2017 Share Posted January 28, 2017 same here, can open the kneeboard but cant switch pages Link to comment Share on other sites More sharing options...
Tango777 Posted January 29, 2017 Share Posted January 29, 2017 Me too in 1.5.6 Open Alpha. i7-13700F - 32GB DDR5 RAM - NVIDIA GeForce RTX 4060Ti 16GB - 2TB NVMe SSD - Windows 11 Link to comment Share on other sites More sharing options...
Deadshot Posted February 1, 2017 Share Posted February 1, 2017 I've seen a bug where cycling the kneeboard backward yields a transparent texture and doesn't go any further, but haven't seen the kneeboard straight-up stuck. I have this bug :( Any workaround for this? Link to comment Share on other sites More sharing options...
Panzerfan Posted February 6, 2017 Author Share Posted February 6, 2017 A little Update: I managed to make the kneeboard pages turn forward, but backward won't work. Also it seems like the key bindings dissapear after exiting the menu, despite saving. I believe this is a general open beta bug, as it doesn't happen in the stable release in the F-5 Tiger Link to comment Share on other sites More sharing options...
maxxs Posted February 7, 2017 Share Posted February 7, 2017 Me too. Backward dont work. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
-Mop- Posted April 29, 2017 Share Posted April 29, 2017 forward doesn´t work for me Link to comment Share on other sites More sharing options...
lemoen Posted May 2, 2017 Share Posted May 2, 2017 Me too. Transparent and pages won't turn. I think it happens when I've been flying a different plane then switch to viggen. Link to comment Share on other sites More sharing options...
whaaw Posted May 11, 2017 Share Posted May 11, 2017 i dont know if this helps, but i had the same problem and i was able to fix it. the problem was that i binded my hotas keys in the viggen settings --> submenu KNEEBOARD. and those bindings dont work for me except the kneeboard on/off. i had to change the submenu to SEARCH, and search manually for the bindings, i pressed [ and ] on my keyboard to find the right binding, and to my suprise i was able to bind it to my hotas and now its working SFMBE Link to comment Share on other sites More sharing options...
gandhi2 Posted May 16, 2017 Share Posted May 16, 2017 thanks whaaw, this worked for me :) On my german keyboardlayout I had to add "ü" and "+" to my rotaryknop. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
whaaw Posted May 18, 2017 Share Posted May 18, 2017 thanks whaaw, this worked for me :) On my german keyboardlayout I had to add "ü" and "+" to my rotaryknop. np, now at least i know im not crazy SFMBE Link to comment Share on other sites More sharing options...
viethson Posted June 25, 2017 Share Posted June 25, 2017 (edited) I had the same issue. What I found was that with some modules the kneeboard worked fine with some not. Among the working modules was the Mig. So what I did was I copied the kneeboard section in the keyboard config file of the Mig into that of the Viggen which did not seem to have such a section before at all. Now the kneeboard is working fine in the Viggen. This may also work with other modules. Haven't tried yet. Maybe this helps. Edited June 25, 2017 by viethson Link to comment Share on other sites More sharing options...
Recommended Posts