Jump to content

Oculus Rift with DCS World Discussion


NineLine

Recommended Posts

snapviews help alot with guages and mfds.

Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill,

X470 Taichi Ultimate, 2x R7970 Lightnings Crossfired @ 1.1/6.0GHz,

3x ASUS VS248HP + Hanns·G HZ201HPB + Oculus HMD,

Thrustmaster Warthog HOTAS + MFDs, CH Fighterstick+Pro Throttle+Pro Pedals

Link to comment
Share on other sites

Yes. Very much needed. To bad the Rift doesn't have an on/off switch. Maybe two seperate. Exe launchers for DCS vs the GUI check box? Don't know, but something that doesn't force a restart to turn on/off VR would be great.

 

I just added all the view keys to my VoiceAttack profile last night. Works great, and no wasted HOTAS keys that way.

 

Sent from my SCH-I545 using Tapatalk

 

Is there a switch you can use to start it with VR off? If so you could just create an extra shortcut with the no VR switch at the end.

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

Hard to believe you guys don't see a difference. For me the gauges are night and day clearer with PD 1.5 and above. I don't see much past 1.5 myself but the difference from 0 to 1.5 for me is staggering.

 

 

Are they clear

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Are they clear

 

 

Sent from my iPad using Tapatalk

Clear is a strong word... Able to be read without straining? For me yes. 1.6 is what I found works for me. With that the HUD is clear and crisp as are most dials and the ones I could not read before are able to be read without having to focus on them for a long period of time.

VFA-25 Fist of the Fleet

[sIGPIC][/sIGPIC]

Virtual Carrier Strike Group One | Discord

Link to comment
Share on other sites

Clear is a strong word... Able to be read without straining? For me yes. 1.6 is what I found works for me. With that the HUD is clear and crisp as are most dials and the ones I could not read before are able to be read without having to focus on them for a long period of time.

 

 

I wonder what I'm doing wrong then cause mine are still blurry HUD is clear apart from that I have strain hard

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

I wonder what I'm doing wrong then cause mine are still blurry HUD is clear apart from that I have strain hard

 

 

Sent from my iPad using Tapatalk

 

Did you install the Oculus software in the default directory?

[sIGPIC][/sIGPIC]

 

Gigabyte GA97XSLI

Core i7 4790 @ 4.0 Ghz

MSI GTX 1080ti

32 Mb RAM DDR3-2133

512GB SSD for DCS

HP Reverb VR HMD

Thrustmaster Warthog & MFG Crosswind

Link to comment
Share on other sites

For anyone who has The Gazelle,Can you read the small switches toward the bottom of the panel using Pixel Density?

Thank You

Phantom88

 

yes I can read the small switches but have to lean in I have debug setting set to 2

System:Motherboard Asus ROG Strix Z390-E,Asus ROG GeForce RTX 2080Ti OC, GPU, 32GB Corsair Vengeance DDR4 Ram, Intel i9 9900K @ 5 GHz , cooled by NZXT Kraken X52, Acer XB270HU G-Sinc monitor, Windows 10 Pro, Warthog joystick and throttle with wasy extension, VBK Gunfighter Pro and MCG Pro,MFG Rudder, running on a dedicated 1TB Samsung 970 Pro M2 Nvme , Super Wheel Stand Pro, with a HP Reverb G2

Link to comment
Share on other sites

Nice timing... now show something from that seat you've been working on. :smilewink:

 

Mate, it arrived this morning. Running on my old rig with a GTX 1070 and sitting in the ejection seat is just unbelievable. Already messaged a couple of other pilots to get over here and test it out. Flying the Mirage2000 is just great.

 

And I haven't altered any pixel density settings yet either.

InWin S Frame with Asus Z170 | i7-6700K @ 4.5 Water Cooled CPU and Graphics | 16GB DDR4 | GTX1070 | 240GB M.2 SSD | Warthog Hotas | MFG Crosswind | 40" Samsung 4K | CV1 | Replica MB Mk10 Ejection Seat with Gametrix 908

Link to comment
Share on other sites

Hard to believe you guys don't see a difference. For me the gauges are night and day clearer with PD 1.5 and above. I don't see much past 1.5 myself but the difference from 0 to 1.5 for me is staggering.

 

I hope you mean 1.0 and not 0

Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill,

X470 Taichi Ultimate, 2x R7970 Lightnings Crossfired @ 1.1/6.0GHz,

3x ASUS VS248HP + Hanns·G HZ201HPB + Oculus HMD,

Thrustmaster Warthog HOTAS + MFDs, CH Fighterstick+Pro Throttle+Pro Pedals

Link to comment
Share on other sites

Mate, it arrived this morning. Running on my old rig with a GTX 1070 and sitting in the ejection seat is just unbelievable. Already messaged a couple of other pilots to get over here and test it out. Flying the Mirage2000 is just great.

 

And I haven't altered any pixel density settings yet either.

 

Nice. I got email this morning that my OR is now shipped... this weeked I'm putting in new PC parts (mobo/cpu/ram and that beastly M.2 Samsung 950 SSD) :pilotfly:

No longer active in DCS...

Link to comment
Share on other sites

Nice. I got email this morning that my OR is now shipped... this weeked I'm putting in new PC parts (mobo/cpu/ram and that beastly M.2 Samsung 950 SSD) :pilotfly:

 

That is an awesome drive, got that same M.2 Drive as well, installed into this:

 

IMG_1383_zpsemvymxvr.jpg

InWin S Frame with Asus Z170 | i7-6700K @ 4.5 Water Cooled CPU and Graphics | 16GB DDR4 | GTX1070 | 240GB M.2 SSD | Warthog Hotas | MFG Crosswind | 40" Samsung 4K | CV1 | Replica MB Mk10 Ejection Seat with Gametrix 908

Link to comment
Share on other sites

I see we got same speaker set and rudder pedals :) I wonder what's on the platform :)

 

By the way I just got my wife to take photo of me while holding a ruler under my nose, looks like my IPD is 69.8mm (just on the limit of 70 for OR) :music_whistling:

No longer active in DCS...

Link to comment
Share on other sites

So my order says shipped however the UPS number still isn't working!

 

Anybody have this issue?

Windows 10 Pro | ASUS RANGER VIII | i5 6600K @ 4.6GHz| MSI RTX 2060 SUPER | 32GB RAM | Corsair H100i | Corsair Carbide 540 | HP Reverb G2 | MFG crosswind Pedals | Custom Spitfire Cockpit

Project IX Cockpit

Link to comment
Share on other sites

It did this on mine. I had to wait until the item was collected by ups for it to register.

 

Ah okay, that was my concern!

 

Oh well doubt I will get it by tomorrow then :cry: next week it is :pilotfly:

 

Thanks for confirming dude

Windows 10 Pro | ASUS RANGER VIII | i5 6600K @ 4.6GHz| MSI RTX 2060 SUPER | 32GB RAM | Corsair H100i | Corsair Carbide 540 | HP Reverb G2 | MFG crosswind Pedals | Custom Spitfire Cockpit

Project IX Cockpit

Link to comment
Share on other sites

Ah okay, that was my concern!

 

Oh well doubt I will get it by tomorrow then :cry: next week it is :pilotfly:

 

Thanks for confirming dude

Give ups a call they will be able to tell you over the phone if they have it yet;)

 

 

 

Sent from my SM-G935F using Tapatalk



 

Water cooled i9-9900K | Maximus Code XI MB | RTX3090  | 64GB | HP Reverb G2 
Link to comment
Share on other sites

So my order says shipped however the UPS number still isn't working!

 

Anybody have this issue?

 

Mine was the same and it took approx 5 days from the notification it was shipped. Well worth the wait Krupi,

InWin S Frame with Asus Z170 | i7-6700K @ 4.5 Water Cooled CPU and Graphics | 16GB DDR4 | GTX1070 | 240GB M.2 SSD | Warthog Hotas | MFG Crosswind | 40" Samsung 4K | CV1 | Replica MB Mk10 Ejection Seat with Gametrix 908

Link to comment
Share on other sites

I see we got same speaker set and rudder pedals :) I wonder what's on the platform :)

 

By the way I just got my wife to take photo of me while holding a ruler under my nose, looks like my IPD is 69.8mm (just on the limit of 70 for OR) :music_whistling:

 

A little more work yet before I show you the new one, getting there. There is going to be two side by side though :)

 

I am loving Eve Valkerie, it feels like Battlestar Galactica when taking off.... and Katie Sackoff is the voice :)

InWin S Frame with Asus Z170 | i7-6700K @ 4.5 Water Cooled CPU and Graphics | 16GB DDR4 | GTX1070 | 240GB M.2 SSD | Warthog Hotas | MFG Crosswind | 40" Samsung 4K | CV1 | Replica MB Mk10 Ejection Seat with Gametrix 908

Link to comment
Share on other sites

Well the tracking website updated to "Ready for UPS" and the delivery date is 'unknown' however I also got an email from UPS MyChoice stating that I have a parcel delivery expected tomorrow.. :bounce: do I dare believe it to be in my hands tomorrow! :fear:


Edited by Krupi

Windows 10 Pro | ASUS RANGER VIII | i5 6600K @ 4.6GHz| MSI RTX 2060 SUPER | 32GB RAM | Corsair H100i | Corsair Carbide 540 | HP Reverb G2 | MFG crosswind Pedals | Custom Spitfire Cockpit

Project IX Cockpit

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...