Kiakawa Posted December 25, 2015 Share Posted December 25, 2015 I Downloaded the new Mirage 2000 Module today and tried to take it on a training flight. After i entered the cockpit my Framrate droped to 10-20 FPS. Also some of the Controls were strange (i hear a switch going on and off the whole time but could not locate that swich). The Throttle inside the Cockpit is only moving to 25% even if i push my Throttle all the way up. I loaded a mission with the F15c just to make sure and everything went fine with Frames between 60 and 80. I tried to switch off some options like Shadows and other stuff, but nothing changed. I am using an I7 920 @ 2.67Ghz, 12GB Ram, Geforce Nvidia 960, Win 10 64Bit 1 Link to comment Share on other sites More sharing options...
KeyserSoze Posted December 25, 2015 Share Posted December 25, 2015 I'm getting around 80+ fps in the Mirage cockpit.......as for the controls, make sure you clear all the double mapped inputs in your control settings......:-) 1 Usual Suspects:joystick: i7 6700k, 32g, Windows 10, Titan-X 12gb, Asus 27" 1ms 144hz, MFG crosswind pedals, trackir 5, TM Warthog Link to comment Share on other sites More sharing options...
Nooch Posted December 25, 2015 Share Posted December 25, 2015 Try to turn off HDR and set shadows to medium. If you have a gtx 960 this is were it should be set otherwise it will kill your fps 1 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Kiakawa Posted December 25, 2015 Author Share Posted December 25, 2015 Tried that out but i still get only 10-15 FPS. When i jump into a A10c or F15 everything is back to normal, so 80FPS+ Link to comment Share on other sites More sharing options...
Catweasel Posted December 25, 2015 Share Posted December 25, 2015 I have a GTX960 and 1! Frame in 2.0. 50 FPS in 1.5, so where is that little buggy hiding? Link to comment Share on other sites More sharing options...
Kiakawa Posted December 26, 2015 Author Share Posted December 26, 2015 I found the solution to the Problem. I started 1.5 in Vista compatibility (or how that is written in english) to work around some problems i had with the occulus rift. Seems that this caused the Frame Drop. After launching 1.5 without compatibility i have 100FPS Link to comment Share on other sites More sharing options...
LevelPulse Posted December 26, 2015 Share Posted December 26, 2015 As for the clicking noise, that is because easy radio is enabled. Uncheck that under gameplay to get rid of the sound. [sIGPIC][/sIGPIC] Director | Team Coordinator ME-163B Project The DCS Modding Hub Discord PC Specs: Intel I7 8700k 4.7Ghz Gigabyte Aorus Ultra Gaming Z370 Motherboard 16GB Corsair Vengeance DDR4 3000MHz Ram 500GB Samsung Evo 850 SSD Link to comment Share on other sites More sharing options...
Zee Pet Posted December 28, 2015 Share Posted December 28, 2015 I'm also experiencing these framerate drops. On and off. Pretty tough when trying to catch those migs... But yes: 15FPS inside, 60 outside. Hopefully its just something that will get ironed out as beta progresses. ||i5-9600k||MSI GTX1070Ti Duke||16GB DDR4 G.SKILL Ripjaws V||Gigabyte Aorus B360||X56|| Link to comment Share on other sites More sharing options...
VTJS17_Fire Posted December 28, 2015 Share Posted December 28, 2015 In DCS 2.0 I have round about 15 FPS in the M-2000C, in DCS 1.5 all is fine with 60 FPS. he other modules in 2.0 bring me also normal FPS (50 FPS+). Best regards, Fire Hardware: Intel i5 4670K | Zalman NPS9900MAX | GeIL 16GB @1333MHz | Asrock Z97 Pro4 | Sapphire Radeon R9 380X Nitro | Samsung SSDs 840 series 120GB & 250 GB | Samsung HD204UI 2TB | be quiet! Pure Power 530W | Aerocool RS-9 Devil Red | Samsung SyncMaster SA350 24" + ASUS VE198S 19" | Saitek X52 | TrackIR 5 | Thrustmaster MFD Cougar | Speedlink Darksky LED | Razor Diamondback | Razor X-Mat Control | SoundBlaster Tactic 3D Rage ### Software: Windows 10 Pro 64Bit [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Jansgi Posted December 28, 2015 Share Posted December 28, 2015 (edited) In DCS 2.0 I have round about 15 FPS in the M-2000C, in DCS 1.5 all is fine with 60 FPS. he other modules in 2.0 bring me also normal FPS (50 FPS+). Best regards, Fire I had low fps also until I disabled dcs.exe compatibility mode. Try that and see how it affects the performance. Edited December 28, 2015 by Jansgi Asus ROG Strix X570-E Gaming AMD Ryzen™ 5 5600X AMD Radeon™ RX 6800 XT G.Skill 32GB (2 x 16GB) Trident Z Neo DDR4 3600MHz Link to comment Share on other sites More sharing options...
NahkaSukka Posted May 11, 2016 Share Posted May 11, 2016 15-90 fps here in M2K cockpit. Usually stays around 25-30. I dont use any compatibility modes and fps is just fine with other modules. Hopefully this will be fixed in near future. Link to comment Share on other sites More sharing options...
Rudel_chw Posted September 16, 2016 Share Posted September 16, 2016 I had low fps also until I disabled dcs.exe compatibility mode. Try that and see how it affects the performance. Thank you, thank you ... :) ... I've just purchased the Mirage (taking advantage of the 40% discount of this weekend) and was dismayed when it gave me less than 10 fps, whereas my other planes give 40-60 fps. Turns out that I was using compatibility mode (because my PC has Windows Server 2012 R2) ... I changed it to no compatibility and problem solved :D So, thanks a lot for the advice ... even tough its an old bug report, it is still sound advice. For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra For Gaming: 34" Monitor - Ryzen 3600X - 32 GB DDR4 2400 - nVidia GTX1070ti - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar - Oculus Rift CV1 Mobile: iPad Pro 12.9" of 256 GB Link to comment Share on other sites More sharing options...
gavagai Posted September 17, 2016 Share Posted September 17, 2016 Wait, wait, wait! You're solving this bug just by right clicking on dcs.exe and unticking that box? I just checked mine and it has was not in compatibility mode. Or are you looking at something else? P-51D | Fw 190D-9 | Bf 109K-4 | Spitfire Mk IX | P-47D | WW2 assets pack | F-86 | Mig-15 | Mig-21 | Mirage 2000C | A-10C II | F-5E | F-16 | F/A-18 | Ka-50 | Combined Arms | FC3 | Nevada | Normandy | Straight of Hormuz | Syria Link to comment Share on other sites More sharing options...
Rudel_chw Posted September 17, 2016 Share Posted September 17, 2016 Wait, wait, wait! You're solving this bug just by right clicking on dcs.exe and unticking that box? That's correct, and the problem is repeatable ... if I have my DCS in compatibility mode, like this: then on the Mirage 2000 (and only on that module, other planes work fine) I get very low fps, like this: If I clear the compatibility option on the DCS.exe shortcut, then I get normal fps, like so: My PC is a mid-level rig (Intel Core i7-750, 12 GB of ram, SSD and nVidia GTX 750 video card, Thrustmaster Cougar hotas and a TrackIR clone device ... ahh, and I run Windows 2012 for job reasons), my game options are these: I just checked mine and it has was not in compatibility mode. Or are you looking at something else? Maybe your problem has a different cause ... anyway, I was looking on these forums for help with my problem (I just bought the Mirage yesterday) and I'm glad to have found this thread ... would never have suspected that such an innocent option could cause this serious fps drop :) Best regards. For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra For Gaming: 34" Monitor - Ryzen 3600X - 32 GB DDR4 2400 - nVidia GTX1070ti - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar - Oculus Rift CV1 Mobile: iPad Pro 12.9" of 256 GB Link to comment Share on other sites More sharing options...
Recommended Posts