JaBoG32_Prinzartus Posted May 23, 2016 Share Posted May 23, 2016 What is the result? No error message any more! Thank you. Windows 10, I7 8700k@5,15GHz, 32GB Ram, GTX1080, HOTAS Warthog, Oculus Rift CV1, Obutto R3volution, Buttkicker [sIGPIC][/sIGPIC] ЯБоГ32_Принз Link to comment Share on other sites More sharing options...
hijijis Posted May 23, 2016 Share Posted May 23, 2016 Hi. Today i have supported with 23$ your "simshaker 3+1", because i think that is a wonderful software. I hope that you send me my authorization key soon. thank you for your work Link to comment Share on other sites More sharing options...
geert Posted May 23, 2016 Share Posted May 23, 2016 Error messages Hi Andre/Olaf, I´m still having some problems with simshaker, some effects (landing gear for instance in L-39 and some other planes) just don´t work. Once in a while I get a bunch of successive error messages. That also happened just now and I took some screenshots of the messages, see attachements. Happens with both the beta shimshaker and normal simshaker. Maybe I should mention that I have the old stable DCS, beta 1.5 and 2.0 installed. I once moved the 2.0 version by copy-paste to another SSD. Hope you can help me with this one. Thanks. Geert Link to comment Share on other sites More sharing options...
f4l0 Posted May 24, 2016 Share Posted May 24, 2016 Hi Andre/Olaf, I´m still having some problems with simshaker, some effects (landing gear for instance in L-39 and some other planes) just don´t work. Once in a while I get a bunch of successive error messages. That also happened just now and I took some screenshots of the messages, see attachements. ... Happens with both the beta shimshaker and normal simshaker. Maybe I should mention that I have the old stable DCS, beta 1.5 and 2.0 installed. I once moved the 2.0 version by copy-paste to another SSD. Hope you can help me with this one. Thanks. Geert Hi Geert, please check that only one SimShaker instance is running in the taskbar (lower right side). Coping DCS installations will confuse SimShaker. To correct the behavior, same manual steps with the registry editor are necessary. Basically adjusting/correcting the DCS installation paths in the registry... f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
helios123 Posted May 24, 2016 Share Posted May 24, 2016 4 shakers support? hi i just bought your sound module, and sent the email for my key. I have 4 transducers at four corners of my rig. Is there anyway to get all four working? your software only uses the front two. IF not, how can i force it to use the back two transducers instead of the front two? Link to comment Share on other sites More sharing options...
=Andre= Posted May 24, 2016 Author Share Posted May 24, 2016 Hi helios123, to be honest, I don't know the way, since I don't have 4 transducers. I do not plan to support more than 2 channels in sound module. May be you could try to feed up other two channels with the same signals using a mixer? http://vb-audio.pagesperso-orange.fr...ter/banana.htm If you have any success with 4 transducers, please, share with us. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
helios123 Posted May 24, 2016 Share Posted May 24, 2016 Hi helios123, to be honest, I don't know the way, since I don't have 4 transducers. I do not plan to support more than 2 channels in sound module. May be you could try to feed up other two channels with the same signals using a mixer? http://vb-audio.pagesperso-orange.fr...ter/banana.htm If you have any success with 4 transducers, please, share with us. I tried to use the mixer program and put on stereo mix, but it still not work for all four. NOt sure why. Link to comment Share on other sites More sharing options...
shagrat Posted May 24, 2016 Share Posted May 24, 2016 (edited) I tried to use the mixer program and put on stereo mix, but it still not work for all four. NOt sure why. You are aware that you need a separate amplifier for the transducers? In general I would recommend to use a bigger stereo amp with 2 pairs of stereospeaker outs. (Speakers A and speakers B). Now you can connect both front L/R transducers to Speaker output A and the rear L/R pair to speaker output B. Connect the PCs second soundcard stereo signal to the Amp and activate both A and B outputs. Alternative: http://www.amazon.com/Stereo-Speaker-Selector-Switcher-Combiner/dp/B00CZNXKRA CHECK the IMPEDANCE requirements of your AMP when connecting multiple speakers/transducers! Usual impedance is 4Ohm for stereo, using 4 speakers/transducers in parallel often requires 8Ohm speakers/transducers! Edited May 24, 2016 by shagrat Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment Share on other sites More sharing options...
shagrat Posted May 24, 2016 Share Posted May 24, 2016 hi i just bought your sound module, and sent the email for my key. I have 4 transducers at four corners of my rig. Is there anyway to get all four working? your software only uses the front two. IF not, how can i force it to use the back two transducers instead of the front two? Easiest solution to just use the rear pair is to connect them to the cables/outputs currently in use for the front pair? :smartass: Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment Share on other sites More sharing options...
helios123 Posted May 24, 2016 Share Posted May 24, 2016 Easiest solution to just use the rear pair is to connect them to the cables/outputs currently in use for the front pair? :smartass: in regards to your earlier post, i have two 2 channel amps running two transducers each, this is coming from simvibe for racing. your right i could just swap the cables, but was hoping to avoid that. Link to comment Share on other sites More sharing options...
shagrat Posted May 24, 2016 Share Posted May 24, 2016 (edited) in regards to your earlier post, i have two 2 channel amps running two transducers each, this is coming from simvibe for racing. your right i could just swap the cables, but was hoping to avoid that. Two amps? Then it should be possible to use a cinch Y-Cable (very rare unless you solder it yourself) or a Y-splitter box... Hmmm, if you use 3,5mm plugs for the soundcard there should be cheap dual Headphone splitters to put two "headphones" to your smartphone to listen to music... should work for yoir setup. The question is it practical to split before the two amps? http://www.ebay.com/bhp/headphone-splitter Edited May 24, 2016 by shagrat Added link Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment Share on other sites More sharing options...
geert Posted May 24, 2016 Share Posted May 24, 2016 Hi Geert, please check that only one SimShaker instance is running in the taskbar (lower right side). Coping DCS installations will confuse SimShaker. To correct the behavior, same manual steps with the registry editor are necessary. Basically adjusting/correcting the DCS installation paths in the registry... Thanks. I don´t really know what I was doing in the registry, but I found some entries (2 or 3) somewhere which refered to an installation that I had deleted, so I deleted those entries. Those same entries (dcs.exe and updater) for the new path were I had copy-pasted that installation were already there. Should that suffice? Will do some testing later. Link to comment Share on other sites More sharing options...
helios123 Posted May 25, 2016 Share Posted May 25, 2016 Two amps? Then it should be possible to use a cinch Y-Cable (very rare unless you solder it yourself) or a Y-splitter box... Hmmm, if you use 3,5mm plugs for the soundcard there should be cheap dual Headphone splitters to put two "headphones" to your smartphone to listen to music... should work for yoir setup. The question is it practical to split before the two amps? http://www.ebay.com/bhp/headphone-splitter Thanks i'll use the 3.5mm y splitter. should work. we'll see in a days. Link to comment Share on other sites More sharing options...
geert Posted May 25, 2016 Share Posted May 25, 2016 Still not working Tested landing gear with the L-39 (in DCS 2.0) and still doesn't work. Any ideas? Link to comment Share on other sites More sharing options...
jasonstory44 Posted May 25, 2016 Share Posted May 25, 2016 Hi guys...wondering if anyone can help. My simshaker works fine in DCS stable release but just noticed I am getting nothing in the alpha and the beta. I see the entries in the export LUAs for both. And also the core module folder in the saved games....any thoughts? Regards, Jason Win 10 Pro, Intel i9 9900k overclocked to 5.1 (water cooled), 64 gb Corsair Dominator platinum RAM (3444 MHz) Titan RTX overclocked and water cooled 1.1 TB SSD 2 TB M.2 SSD TM Warthog Stick and throttle MFG Crosswinds Reverb VR Buttkicker LFE, SimShaker, Jetseat. All DCS modules Link to comment Share on other sites More sharing options...
Cowboy10uk Posted May 26, 2016 Share Posted May 26, 2016 Hi guys, used this with the Hawk for the first time last night. However I seem to have an issue, that I get no effects while on the ground. No engine or taxing vibration whatsoever. When I'm flying, the I can feel all G effects and wing shudder, Stalls with no issues whatsoever. Just wondering if anyone else has this issue or any idea what setting I need to change to solve this. All other aircraft that I've tried, Huey, Gazelle, Mirage seem to work fine. Cowboy10uk [sIGPIC][/sIGPIC] Fighter pilots make movies, Attack pilots make history, Helicopter pilots make heros. :pilotfly: Corsair 570x Crystal Case, Intel 8700K O/clocked to 4.8ghz, 32GB Vengeance RGB Pro DDR4 3200 MHZ Ram, 2 x 1TB M2 drives, 2 x 4TB Hard Drives, Nvidia EVGA GTX 1080ti FTW, Maximus x Hero MB, H150i Cooler, 6 x Corsair LL120 RGB Fans And a bloody awful Pilot :doh: Link to comment Share on other sites More sharing options...
f4l0 Posted May 26, 2016 Share Posted May 26, 2016 Hi guys, used this with the Hawk for the first time last night. However I seem to have an issue, that I get no effects while on the ground. No engine or taxing vibration whatsoever. When I'm flying, the I can feel all G effects and wing shudder, Stalls with no issues whatsoever. Just wondering if anyone else has this issue or any idea what setting I need to change to solve this. All other aircraft that I've tried, Huey, Gazelle, Mirage seem to work fine. Cowboy10uk Hawk is not implemented, reason: I don't own it... f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
f4l0 Posted May 26, 2016 Share Posted May 26, 2016 Hi guys...wondering if anyone can help. My simshaker works fine in DCS stable release but just noticed I am getting nothing in the alpha and the beta. I see the entries in the export LUAs for both. And also the core module folder in the saved games....any thoughts? Regards, Jason Did you move your alpha/beta installations after the installation to a new location(e.g. new SSD)? f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
Cowboy10uk Posted May 26, 2016 Share Posted May 26, 2016 Hawk is not implemented, reason: I don't own it... Lol, well that would explain it then. ;) surprised that the G feedback etc works with it really well. :) Cheers mate. Cowboy10uk [sIGPIC][/sIGPIC] Fighter pilots make movies, Attack pilots make history, Helicopter pilots make heros. :pilotfly: Corsair 570x Crystal Case, Intel 8700K O/clocked to 4.8ghz, 32GB Vengeance RGB Pro DDR4 3200 MHZ Ram, 2 x 1TB M2 drives, 2 x 4TB Hard Drives, Nvidia EVGA GTX 1080ti FTW, Maximus x Hero MB, H150i Cooler, 6 x Corsair LL120 RGB Fans And a bloody awful Pilot :doh: Link to comment Share on other sites More sharing options...
f4l0 Posted May 26, 2016 Share Posted May 26, 2016 Some planes share this effect implementation... f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
jasonstory44 Posted May 26, 2016 Share Posted May 26, 2016 Nope haven't moved anything. Installed SimShaker after having all three versions of DCS on the same hard drive already. To be honest I can't remember if I've tried SimShaker on the alpha and beta yet Win 10 Pro, Intel i9 9900k overclocked to 5.1 (water cooled), 64 gb Corsair Dominator platinum RAM (3444 MHz) Titan RTX overclocked and water cooled 1.1 TB SSD 2 TB M.2 SSD TM Warthog Stick and throttle MFG Crosswinds Reverb VR Buttkicker LFE, SimShaker, Jetseat. All DCS modules Link to comment Share on other sites More sharing options...
f4l0 Posted May 26, 2016 Share Posted May 26, 2016 Please check/send/post the log from the 'Service' tab f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
hannibal Posted June 6, 2016 Share Posted June 6, 2016 (edited) hey andre Also, i plan to use jetseat and buttkicker for Assetto Corsa and Warthunder.. how can i control the output to both jetseat and buttkicker in these games?... is there some kind of option like in DCS World simshaker console? Edited June 6, 2016 by hannibal find me on steam! username: Hannibal_A101A http://steamcommunity.com/profiles/76561197969447179 Link to comment Share on other sites More sharing options...
adrianstealth Posted June 18, 2016 Share Posted June 18, 2016 hi the g-force effect (usb mode) what dos this do? I turned it on but it did nothing -is there a mode that will work for people without the jet seat thing ? I use x2 butt kickers Link to comment Share on other sites More sharing options...
adrianstealth Posted June 18, 2016 Share Posted June 18, 2016 +be great if we could have x4 channels as I have x4 butt kickers -dont want to use splitter twinning cables as x4 channels are used from simvibe for sim racing etc Link to comment Share on other sites More sharing options...
Recommended Posts