Andrei Posted July 25, 2014 Share Posted July 25, 2014 Situation: F-86 (blue coalition) ramp start from Batumi (blue coalition). Cockpit open. Radio menu call ground electric power - no response. Also unable to select tower from the F5 list - it simply does not exist there, nearest available airport is Kobuleti. AMD R7 5800X3D | Aorus B550 Pro | 32GB DDR4-3600 | RTX 4080 | VKB MGC Pro Gunfighter Mk III + Thustmaster TWCS + VKB T-Rudder Mk4 | HP Reverb G2 FC3 | A-10C II | Ка-50 | P-51 | UH-1 | Ми-8 | F-86F | МиГ-21 | FW-190 | МиГ-15 | Л-39 | Bf 109 | M-2000C | F-5 | Spitfire | AJS-37 | AV-8B | F/A-18C | Як-52 | F-14 | F-16 | Ми-24 | AH-64 NTTR | Normandy | Gulf | Syria | Supercarrier | Link to comment Share on other sites More sharing options...
Chief1942 Posted July 30, 2014 Share Posted July 30, 2014 Try this. Open Mission Editor and select the mission you are working with under the "Open" tab which opens when you click on "File" at the top of the page. Select the "Player" aircraft symbol and when the panel opens to the right screen you will find a icon for "communications" on the same line with the loadout and other icons. Should be the last icon and looks like a transmitting antenna. Select it and in the dropdown menu see if Batumi (Channel 3) is set to 260.00 Mhz. If not you can simply highlight the current freq., delete it and type in the correct one. You may have to do the same for all the air bases/airports. The radio channels for the F-86F are tied to the channel selector dial on the right rear panel in the aircraft and are unique to each airbase/port. In other words, to contact a particular "Tower" you must have that towers channel programmed to the Channel Selector Dial in the a/c. And that assignemnt is done via the Mission Editor. Intel i5-4690K Devil's Canyon, GForce TitanX, ASUS Z-97A MB, 16GB GDDR3 GSkill mem, Samsung SSD X3,Track IR, TM Warthog, MFG Crosswind pedals, Acer XB280HK monitor,GAMETRIX KW-908 JETSEAT Link to comment Share on other sites More sharing options...
Recommended Posts