Panthir Posted February 9, 2017 Share Posted February 9, 2017 I will try it. Thanks My Hardware: ROG Strix X570-F Gaming - AMD 5600X @ 4.7 ghz - G.SKILL TRIDENT 32GB DDR4 3200 (14-14-14-34 CL) - GigaByte 3080ti OC 12gb - Corsair MP600 Force 1TB - 2 x EVO Nvme 500GB - Virpil Warbird Base T-50CM2 and TM Throttle + Trackhat + G25 + AOC AG271QG 27" My Modules: JF-17, F-16C, AV-8N/A, F-18C, ASJ37, MiG-15Bis, MiG-21Bis, Fw-190D, Bf-109K, P-51D, F-86F, Ka-50 III, UH-1H, Mi-8MTV2, NS430, FC3, A-10C, Mirage 2000C, L-39, F-5E-3, SA342, Spitfire, AH-64, Mirage F-1CE. My Maps: Nevada, Normandy, Persian Gulf, Syria, South Atlantic. Link to comment Share on other sites More sharing options...
BeastyBaiter Posted February 9, 2017 Share Posted February 9, 2017 You do a full shut down after landing, before rearming? I've tried rearming RB15's, but they won't fire. No, why would you think that? I said nothing of the sort. The only steps I didn't mention are pressing G to lower the gear before landing, contacting the ground crew, reselecting armament and then pressing G again after takeoff. All of that followed by the previously mentioned attack instructions. System specs: i5-10600k (4.9 GHz), RX 6950XT, 32GB DDR4 3200, NVMe SSD, Reverb G2, WinWing Super Libra/Taurus, CH Pro Pedals. Link to comment Share on other sites More sharing options...
Eldur Posted February 9, 2017 Share Posted February 9, 2017 Still not working for me. Fired off some rb04s, went back to base and rearmed, took off again and did the same procedure like the first time but the missiles wouldnt go off. Same here... didn't realign the navigation unit though as I didn't know how to. Had the NAV SYS light on all the time on the second flight and the waypoints kept driftig off quite noticeably and I wasn't even able to do manual reference fixes anymore. I couldn't select the start Waypoint via LS anymore... Did work for me aswell, did you remember to select ber after landing and then select the starting airfield again and switch to nav and then start? I should try that By the way I have to mention I used a Viggen that just was placed on the airfield without waypoints which I typed in manually. Everything worked as expected on the first flight, except for the fact that even set to ENKEL, both RB 04 came off. Didn't flip the switch directly left to it down though Link to comment Share on other sites More sharing options...
sideshow Posted February 10, 2017 Share Posted February 10, 2017 According to the change log this issue will be fixed, hopefully next update. Sounds like there'll even be a way program weapons on the kneeboard. https://forums.eagle.ru/showthread.php?t=181548 Link to comment Share on other sites More sharing options...
speckfire Posted February 12, 2017 Share Posted February 12, 2017 I have the same problem with rearming. I start in the air, attacking ships using RB-15's. I can successfully launch the missiles. I land, rearm and go again to attack the remaining ships, the RB-15's do not want to launch. Speed is life !!! Link to comment Share on other sites More sharing options...
Fri13 Posted February 12, 2017 Author Share Posted February 12, 2017 So the rearming is still broken.... i7-8700k, 32GB 2666Mhz DDR4, 2x 2080S SLI 8GB, Oculus Rift S. i7-8700k, 16GB 2666Mhz DDR4, 1080Ti 11GB, 27" 4K, 65" HDR 4K. Link to comment Share on other sites More sharing options...
sideshow Posted February 12, 2017 Share Posted February 12, 2017 I got the latest update, and haven't had any re-arm problems. I launched 2 RB-4s. rearmed with RB-75s, and launched those at a different set of targets. 1.5.6.1938 is the latest, and I had to force the update. Link to comment Share on other sites More sharing options...
speckfire Posted February 12, 2017 Share Posted February 12, 2017 (edited) I got the latest update, and haven't had any re-arm problems. I launched 2 RB-4s. rearmed with RB-75s, and launched those at a different set of targets. 1.5.6.1938 is the latest, and I had to force the update. Try with RB-15's, hit the targets, rearm with RB-15's and fire again. Tried with RB-04...Fired 1st time...rearmed again with RB-04...does not fire. What am I doing wrong? Edited February 12, 2017 by speckfire Speed is life !!! Link to comment Share on other sites More sharing options...
leostrato Posted February 13, 2017 Share Posted February 13, 2017 Same problem here. Rearming the same weapon won't launch. Link to comment Share on other sites More sharing options...
addde Posted February 13, 2017 Share Posted February 13, 2017 From what ive seen, Everything works except Rb75T and RBS15F. The bombs also have a Visual glitch now after rearming where they stay on the Aircraft even tho they are dropped. Link to comment Share on other sites More sharing options...
speckfire Posted February 13, 2017 Share Posted February 13, 2017 From what ive seen, Everything works except Rb75T and RBS15F. Are you sure? Have you tried the RB-04? Rearming again ? Not working for me. Speed is life !!! Link to comment Share on other sites More sharing options...
Shavik Posted February 13, 2017 Share Posted February 13, 2017 Are you sure? Have you tried the RB-04? Rearming again ? Not working for me. Same behavior for me. After landing and rearming my RB-04's they do not fire on the 2nd flight. Link to comment Share on other sites More sharing options...
addde Posted February 13, 2017 Share Posted February 13, 2017 Are you sure? Have you tried the RB-04? Rearming again ? Not working for me. Yea they seem to work for me after rearming. Link to comment Share on other sites More sharing options...
speckfire Posted February 13, 2017 Share Posted February 13, 2017 Yea they seem to work for me after rearming. Congrats you seem to be the only one so far. Are you running on Beta 1.5.6 or regular? Can you also test with the RB-15's? Speed is life !!! Link to comment Share on other sites More sharing options...
addde Posted February 13, 2017 Share Posted February 13, 2017 Congrats you seem to be the only one so far. Are you running on Beta 1.5.6 or regular? Can you also test with the RB-15's? Like i posted earlier, RB75T and RBS15 dont work for me after rearming, the rest work. Non beta atm. Link to comment Share on other sites More sharing options...
speckfire Posted February 13, 2017 Share Posted February 13, 2017 Thanks addde Speed is life !!! Link to comment Share on other sites More sharing options...
Panthir Posted February 14, 2017 Share Posted February 14, 2017 Guys, I assess that some weapon issues are related to the CK37 codes you may input. In my case, whenever I input 922000 for a wide area BK90 double launch prior rearming (missiles hanged under the wings) then usually only one missile is launched, and there is no way to launch any other. My Hardware: ROG Strix X570-F Gaming - AMD 5600X @ 4.7 ghz - G.SKILL TRIDENT 32GB DDR4 3200 (14-14-14-34 CL) - GigaByte 3080ti OC 12gb - Corsair MP600 Force 1TB - 2 x EVO Nvme 500GB - Virpil Warbird Base T-50CM2 and TM Throttle + Trackhat + G25 + AOC AG271QG 27" My Modules: JF-17, F-16C, AV-8N/A, F-18C, ASJ37, MiG-15Bis, MiG-21Bis, Fw-190D, Bf-109K, P-51D, F-86F, Ka-50 III, UH-1H, Mi-8MTV2, NS430, FC3, A-10C, Mirage 2000C, L-39, F-5E-3, SA342, Spitfire, AH-64, Mirage F-1CE. My Maps: Nevada, Normandy, Persian Gulf, Syria, South Atlantic. Link to comment Share on other sites More sharing options...
Panthir Posted February 14, 2017 Share Posted February 14, 2017 So, I first rearm and then I start CK37 program procedure. My Hardware: ROG Strix X570-F Gaming - AMD 5600X @ 4.7 ghz - G.SKILL TRIDENT 32GB DDR4 3200 (14-14-14-34 CL) - GigaByte 3080ti OC 12gb - Corsair MP600 Force 1TB - 2 x EVO Nvme 500GB - Virpil Warbird Base T-50CM2 and TM Throttle + Trackhat + G25 + AOC AG271QG 27" My Modules: JF-17, F-16C, AV-8N/A, F-18C, ASJ37, MiG-15Bis, MiG-21Bis, Fw-190D, Bf-109K, P-51D, F-86F, Ka-50 III, UH-1H, Mi-8MTV2, NS430, FC3, A-10C, Mirage 2000C, L-39, F-5E-3, SA342, Spitfire, AH-64, Mirage F-1CE. My Maps: Nevada, Normandy, Persian Gulf, Syria, South Atlantic. Link to comment Share on other sites More sharing options...
Recommended Posts