DEVELOPMENT UPDATE #3: Phoenix Rising! - ED Forums
 


Notices

Reply
 
Thread Tools Display Modes
Old 08-20-2016, 10:35 PM   #1
Cobra847
3rd Party Developer
 
Cobra847's Avatar
 
Join Date: Sep 2012
Location: Helsingborg, Sweden
Posts: 2,619
Default DEVELOPMENT UPDATE #3: Phoenix Rising!



Dear All,


For the F-14 project, we realized that we'll need to spend considerable time and effort with the development and research for the AIM-54 Phoenix missile.

Not only due to this weapons' unique place as a weapon designed specifically for the AWG-9 radar system, its' role as the tip of the spear of the USN air-to-air capability or even it's amazing range and performance-- but also to ensure that any advantages and disadvantages of the missile are accurately reproduced and respected.

It's quite likely that the AIM-54 will change the players' experience in the DCS multiplayer environment.
Thus, we consider it of the utmost importance to have a wide breadth of open and readily available research available to the community.

We have no horse in this race except for historical accuracy, and with Tom and Márton at our side, we're confident that we'll get as close as anyone ever has.
Please enjoy their initial development report on the AIM-54 below;

Basic Overview
Since the inception of the F-14 project, we have been working closely with Leatherneck to provide our expertise in providing the most accurate simulation for the AIM-54 that can be reasonably developed on a flight simulation game development budget. The iconic nature of the AIM-54 deserves this level of attention, especially due to its long range and advanced guidance systems; systems that were later incorporated into the AIM-120. It's also very important to maintain strict accordance with real life performance parameters, so that historical advantages and drawbacks are accurately simulated and have the appropriate effect on the multiplayer environment.

As it stands of writing, we are currently simulating drag effects at different velocities and altitudes to ensure accurate drag curves. This is perhaps the longest part of the process as each simulation takes hours to run.

This simulation is based off of a 3D CAD model from which has been created based on reliable source material as well as high resolution imagery. The model has been imported into Fluent where a mesh creation, testing and validation process began and has now been completed.

Once all the simulations have been run, we are able to take this data and then use it to create velocity/time diagrams. These will be matched against literature estimates to revalidate the model.

Once established, we will then be able to write DCS code which will mirror the in-game missile’s performance to that which has been simulated. The final step is to then assist Leatherneck with their work in guidance and radar algorithms. The missile has the range it does, not just due to its huge motor, but also its advanced lofting profiles. These exist in the game at the moment, but will be significantly expanded, as their simplicity often leading to worse performance than level flight.
Research

The first step in the process was to data mine as much as possible about the missile. Fortunately, due to its age and public interest, quite a bit of information is available. The most important information for us was the missile’s motor performance and dimensions, the latter being a relatively easy task if taken just from high resolution photographs.

As for the motor, there have been a lot of questions raised across the internet about the Mk-47 vs the Mk-60 motor, and which version of the AIM-54 received which- and why?

In summary, the first motor produced for the prototype was the Mk. 47, which yields 364lbs of propellant. The Mk-47 was produced from the mid- 1960’s up through and until ‘92.
In parallel, the Mk-60 motor was produced with 459lbs of propellant, obviously a much larger motor. However, due to rising costs, this motors' production was cancelled in 1978.

What this basically means is that the AIM-54A had the choice of either motor, and by the time that the AIM-54C was available in the late 70’s/early 80’s, the Mk-60 was no longer in production. The motors were not retired, however, and some were still in service in limited number. As the years progressed, the Mk-60 was removed from service as service life came to an end and the AIM-54C and C+ exclusively used the smaller Mk-47 motor.
CAD
As mentioned previously, the CAD model for the AIM-54 was created from reference material providing exact dimensions, with more specific details (e.g. angles, radiuses) taken from photographs.

We omitted details that would be otherwise masked by the resolution of the numerical mesh (small protrusions)


Figure 1. CAD Model used for the simulation


CFD
The simulation of the supersonic regimes was carried out using a density based solver with all compressibility effects and SST turbulence.

The mesh was created in a way so that it gives good shock resolution in the necessary velocity regions (M1-M4) and damps possible reflections from the boundaries.
The mesh uses hexahedral cells to reduce computational costs and improve accuracy.

The preliminary simulations managed to reproduce all expected shockwave behaviour and interaction phenomena. Currently, we are testing the mesh to make sure it produces the necessary mesh density convergence.

After this step is complete, we can begin the accumulation of data based on the simulations.


Figure 2. Unstructed mesh with refined shock regions




Figure 3. Oblique compression and expansion waves along the missile




Figure 4. Shockwave interaction along the missile, the image shows constant pressure lines




Figure 5. Bow shocks at low supersonic velocity, the image shows the density distribution (lighter = higher density)


Future Developments
Once the simulations are complete and we are happy with their accuracy, we will create a DCS AIM-54 based on this data.
Iterative tests and benchmarks will be run at altitude to ensure that it meets the CFD modelling.

Once the missile matches like-for-like, we will begin to look at the guidance and lofting algorithms.
There are a number of sources that already provide clear examples of efficient intercept and guidance laws that include lofting, one such source is directly from the US Navy Academy, for the then new AIM-120A.

Beyond literary sources, there are SMEs' willing to share their own accounts and insights into how the weapon is employed, and what we’d expect to see at different launch parameters.

There will be a lot of work and co-operation together with Leatherneck to ensure that the missile is expanded past current DCS guidance parameters.
This is the second most challenging part of the AIM-54's development, but I am confident that together with the Leatherneck team, we’ll recreate this iconic weapon to the utmost realism and standards available outside of military contracts.


Many thanks to everyone for reading. The team is hard at work on all aspects of the simulation!

Thank you for your patience and support, always,

Sincerely,
Leatherneck Simulations



__________________
Nicholas Dackard

Founder & Lead Artist
Heatblur Simulations

https://www.facebook.com/heatblur/
Cobra847 is online now   Reply With Quote
Old 08-20-2016, 10:40 PM   #2
Darkbrotherhood7
Member
 
Darkbrotherhood7's Avatar
 
Join Date: Dec 2015
Location: Brazil
Posts: 933
Default

Thanks, Cobra.

That's awesome!
__________________
Mission: "To intercept and destroy aircraft and airborne missiles in all weather conditions in order to establish and maintain air superiority in a designated area. To deliver air-to-ground ordnance on time in any weather condition. And to provide tactical reconaissance imagery" - F-14 Tomcat Roll Call
Darkbrotherhood7 is offline   Reply With Quote
Old 08-20-2016, 10:47 PM   #3
Vitormouraa
Veteran
 
Vitormouraa's Avatar
 
Join Date: Oct 2014
Location: SC, Brazil
Posts: 3,244
Default

Very nice update Nicholas!

Question, are you guys making the AIM-54A?

thanks
__________________


SplashOneGaming is a community of viewers, players, and content creators built on combat flight simulation. Flowing through our veins is years of flight simulation experience in a multitude of different platforms. We welcome and encourage all of you to join us, whether you are seasoned or green, looking to learn, teach, or just trying to find someone to fly with.
Discord
Website
Vitormouraa is offline   Reply With Quote
Old 08-20-2016, 10:48 PM   #4
Blaze
Veteran
 
Join Date: Mar 2009
Location: Orlando, FL
Posts: 3,207
Default

Awesome, what detail! Thanks for the update LN.
__________________
i7 7700K - 16GB RAM - GTX 1080 8GB - Oculus Rift CV1 w/ Touch - HOTAS Warthog - Win 10

"Just when you think you’ve idiot-proofed something,
they come out with a newer, more inept level of idiot."
Blaze is offline   Reply With Quote
Old 08-20-2016, 10:49 PM   #5
rcl
Junior Member
 
Join Date: Mar 2016
Location: Canada-Montreal
Posts: 54
Default

great job. always keep waiting for it!!!!!!!!!!!
rcl is offline   Reply With Quote
Old 08-20-2016, 10:51 PM   #6
rcl
Junior Member
 
Join Date: Mar 2016
Location: Canada-Montreal
Posts: 54
Default

Are u guys working for aim-54a or aim54c???
rcl is offline   Reply With Quote
Old 08-20-2016, 10:51 PM   #7
Silver_Dragon
ED Translator
 
Silver_Dragon's Avatar
 
Join Date: Apr 2005
Location: Arafo, Tenerife, Canary Islands, Spain
Posts: 5,581
Send a message via MSN to Silver_Dragon
Default

great work team
__________________
More news to the front
Wishlist: ED / 3rd Party Campaings
My Rig: Intel I-5 750 2.67Ghz / Packard Bell FMP55 / 16 GB DDR3 RAM / GTX-1080 8 GB RAM / HD 1Tb/2Tb / Warthog / 2 MDF / TFPR

DCS: Roadmap (unofficial):https://forums.eagle.ru/showthread.php?t=116893
DCS: List of Vacant models: https://forums.eagle.ru/showthread.php?t=104115
21Squad DCS: World News: https://www.facebook.com/21Squad-219508958071000/
Silver_Dragon Youtube
Spanish 4Th Perrus Squadon Member: http://www.4thperrus.com
Silver_Dragon is online now   Reply With Quote
Old 08-20-2016, 10:52 PM   #8
uboats
ED Tester / ED Moderator
 
uboats's Avatar
 
Join Date: Mar 2013
Location: East Sierra
Posts: 5,265
Default

nice update!
__________________
东风夜放花千树,更吹落,星如雨


My DCS Mods, Skins, Utilities and Scripts

| Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 2TB SSD + 1TB HDD |
| TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
uboats is offline   Reply With Quote
Old 08-20-2016, 10:52 PM   #9
LevelPulse
Member
 
LevelPulse's Avatar
 
Join Date: Jun 2015
Location: England
Posts: 343
Default

This is awesome news, really glad you are putting an extreme amount of detail into some of the smaller things.

Keep up the good work!
__________________

Director | Team CoordinatorPC Specs:
Spoiler:
  • Intel I7 8700k 4.7Ghz
  • Gigabyte Aorus Ultra Gaming Z370 Motherboard
  • 16GB Corsair Vengeance DDR4 3000MHz Ram
  • 500GB Samsung Evo 850 SSD
LevelPulse is offline   Reply With Quote
Old 08-20-2016, 10:52 PM   #10
Rangi
Senior Member
 
Rangi's Avatar
 
Join Date: Jan 2013
Location: Alice Springs, AU
Posts: 1,943
Default

Nice, update, thank you.
__________________
PC:
Spoiler:
6600K @ 4.5 GHz, 12GB RAM, GTX 970, 32" 2K monitor.
Rangi is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 04:17 PM. vBulletin Skin by ForumMonkeys. Powered by vBulletin®.
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.