mrmat01 Posted June 22, 2020 Share Posted June 22, 2020 Hi guys Im wondering if anyone else is having this problem. :noexpression: I'm having an issue with the FPS in the Heatblur Modules after the last update :(. Before the update I was getting excellent FPS SOLID 50-75 FPS.:D The issue seems to lie with OB. I have tested both OB & Stable. All in the same Instant action mission F-14B_IA_Caucasus_take-off.miz I tested with the same mission both on Stable & OB with a couple of aircraft using the mission editor to change the aircraft . F-18, F-5 & both the Viggen & F-14. In the Viggen & F-14 I am only getting 5-15 FPS :cry: :cry_2:. All other aircraft I tested I was getting a solid 50FPS & up to 125FPS :yay: . The FPS problem is at it worst on the Caucasus map which is very strange :confused:. I did a quick test on Nevada with the Viggen & F-14 & I was getting 25-38FPS still not the best & very inconsistent. I cant seem to put my finger on it I hope it can be fixed & this issue isn't released into stable:fear:. I'm sure the guys at Heatblur will sort it. :thumbup: Link to comment Share on other sites More sharing options...
westr Posted June 22, 2020 Share Posted June 22, 2020 Performance wise this OB has not been the best but it’s been more the channel map. I’ve noticed very poor performance on it in VR. I cannot say for certain if there has been a performance drop regarding the other maps. I do know that in the case of HBs Viggen there is a big performance drop if you select the ground radar and have it set to a range of 30nm I think. Other ranges are fine but this range causes a big FPS hit. It’s a known issue that I think HB have said they are working on. The tomcat I can’t say I’ve noticed any difference in performance i find it is one of the more taxing modules on frames though. RYZEN 7 3700X Running at 4.35 GHz NVIDIA GeForce GTX 1080Ti 32gb DDR4 RAM @3200 MHz Oculus CV1 NvME 970 EVO TM Warthog Stick & Throttle plus 11" extension. VKB T-Rudder MKIV Link to comment Share on other sites More sharing options...
mrmat01 Posted June 28, 2020 Author Share Posted June 28, 2020 Performance wise this OB has not been the best but it’s been more the channel map. I’ve noticed very poor performance on it in VR. I cannot say for certain if there has been a performance drop regarding the other maps. I do know that in the case of HBs Viggen there is a big performance drop if you select the ground radar and have it set to a range of 30nm I think. Other ranges are fine but this range causes a big FPS hit. It’s a known issue that I think HB have said they are working on. The tomcat I can’t say I’ve noticed any difference in performance i find it is one of the more taxing modules on frames though. I had no issues before the last update. I don't have the channel map & don't have VR. I had excellent performance before the last where some cockpit lighting changes were introduced now it is unplayable in OB. I cant believe I'm the only one having this issue as nothing has changed settings or hardware wise on my PC. I don't believe it is a OB issue it is a aircraft issue as it is not happening with any other devs aircraft. Link to comment Share on other sites More sharing options...
Flummi Posted June 30, 2020 Share Posted June 30, 2020 Hi guys Im wondering if anyone else is having this problem. :noexpression: I'm having an issue with the FPS in the Heatblur Modules after the last update :(. Before the update I was getting excellent FPS SOLID 50-75 FPS.:D The issue seems to lie with OB. I have tested both OB & Stable. All in the same Instant action mission F-14B_IA_Caucasus_take-off.miz I tested with the same mission both on Stable & OB with a couple of aircraft using the mission editor to change the aircraft . F-18, F-5 & both the Viggen & F-14. In the Viggen & F-14 I am only getting 5-15 FPS :cry: :cry_2:. All other aircraft I tested I was getting a solid 50FPS & up to 125FPS :yay: . The FPS problem is at it worst on the Caucasus map which is very strange :confused:. I did a quick test on Nevada with the Viggen & F-14 & I was getting 25-38FPS still not the best & very inconsistent. I cant seem to put my finger on it I hope it can be fixed & this issue isn't released into stable:fear:. I'm sure the guys at Heatblur will sort it. :thumbup: For me I have the same problem. PC: Intel Core i7-12700K| Gigabyte Z690 Gaming X DDR4| 2x 32GB DDR4 Kingston Fury Beast (KF436C18BBAK2/64)| PowerColor RX 6800 XT Red Devil| 3x SSD-Drive (one for DCS only)| 3x HDD-Drive| Cougar Panzer Max| custom water cooling| Fedora Linux| Windows 11| Gear: Meta Quest 3| Thrustmaster Warthog HOTAS| MFG Crosswind v2| Leap motion controller| Link to comment Share on other sites More sharing options...
ustio Posted July 4, 2020 Share Posted July 4, 2020 Yes i have the same problem. F-14 have poor frames compare to other aircraft right now Link to comment Share on other sites More sharing options...
archer86 Posted July 4, 2020 Share Posted July 4, 2020 (edited) Since I bought f-14, I use those files which is medicine for who suffers from performance. For me the performance problem is not related with the latest patchs, it is all about the f-14 high resolution photogrammetry model. I recommend you to use those files: https://www.digitalcombatsimulator.com/en/files/3303917/ cockpit https://www.digitalcombatsimulator.com/en/files/3303918/ exterior thank japo32 for those files, without them there is no way to fly fluent for me Edited July 4, 2020 by archer86 Link to comment Share on other sites More sharing options...
mrmat01 Posted July 5, 2020 Author Share Posted July 5, 2020 Since I bought f-14, I use those files which is medicine for who suffers from performance. For me the performance problem is not related with the latest patchs, it is all about the f-14 high resolution photogrammetry model. I recommend you to use those files: https://www.digitalcombatsimulator.com/en/files/3303917/ cockpit https://www.digitalcombatsimulator.com/en/files/3303918/ exterior thank japo32 for those files, without them there is no way to fly fluent for me I shouldn't have to go backwards just to make thing work as they did before the OB was updated. What's the point ? I have a decent machine. WIN 10 64bit Intel i7 8700K RTX 2060 dedicated SSD 32GB RAM. Its not Heatblur's fault it ED's & the OB. It just worse in the F-14 & Viggen. Link to comment Share on other sites More sharing options...
IronMike Posted July 6, 2020 Share Posted July 6, 2020 Noted, guys, thanks for letting us know. If there is anything on our side that we can do, we will. Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
Volator Posted July 6, 2020 Share Posted July 6, 2020 I'm also having framerate issues with the Viggen, or rather some sort of microstutters. I created a mission on Caucasus map (a few static planes at Anapa and some weather with 7/10 clouds) with the Viggen and, after noting the stutters, changed the Viggen for the Hornet. With the Hornet the stutters did not appear. Back to the Viggen, I first took away the clouds. With blue skies the microstutters are less severe, but still present. Then I reduced tree visibility to 55%, and now the simulation is almost always smooth. Every now and then at very low level over trees some occasional stutters remain though. Flying in blue skies with very low tree visibility setting cannot be the answer though! As tested, it seems to be a Viggen issue. The Hornet works like a charm even at high settings (100% tree visibility) and heavy cloud settings. 1./JG71 "Richthofen" - Seven Eleven Link to comment Share on other sites More sharing options...
LASooner Posted July 7, 2020 Share Posted July 7, 2020 In VR it is worse looking at anything below the ACM panel, everything above that I'm getting decent frame rates. F-14B, F-16, F-18C, A-10C, F-5E, F-86, FC3, BF-109, FW-190, P-51, Spitfire, UH-1,AJS-37 Viggen, MIG-15, MIG-19, MIG-21, AV-8B Harrier, P-47D Persian Gulf, Caucuses, NTTR, Normandy, The Channel, Syria Combined Arms, WWII Assets,Super Carrier TM Warthog, Virpil VFX,BuddyFox UFC, Saitek Pro Flight quadrant & Switch Panel, Odyssey+ VR, Jet Pad w/ SSA, Voice Attack w/Viacom Pro GeForce RTX2080TI OC, Intel Core i7-7700K 4.5Ghz, 64GB DDR4, Dedicated 1TB SSD Link to comment Share on other sites More sharing options...
Volator Posted July 8, 2020 Share Posted July 8, 2020 Do we see those microstutters in the "stable"/release version as well? 1./JG71 "Richthofen" - Seven Eleven Link to comment Share on other sites More sharing options...
Volator Posted July 9, 2020 Share Posted July 9, 2020 Or is there an issue with the NVIDIA drivers like with the MiG-21? https://forums.eagle.ru/showpost.php?p=4394156&postcount=10 1./JG71 "Richthofen" - Seven Eleven Link to comment Share on other sites More sharing options...
Milopapa Posted August 22, 2020 Share Posted August 22, 2020 Noted, guys, thanks for letting us know. If there is anything on our side that we can do, we will. Just came here to report that in the latest open beta (aug 19, Syria releas), I'm getting horrible fps with the Tomcat in VR, roughly 2/3 of what it used to be. Both CPU and GPU frametimes are through the roof, while other aircraft (Mustang, Huey) perform like before on the same maps. Anything I can upload to help with the investigation? PC HW: i5 3770k@4.6GHz | Asus 1080Ti | 16GB DDR3 | Samsung 850 EVO | MSI MPower Z77 Input: MS FFB2 w/ F-16 FLCS grip | CH Pro Throttle | MFG Crosswind | HTC Vive DCS modules: F-14, FW-190, P-51, Bf109, UH1, Mi-8, FC3, CE2 Link to comment Share on other sites More sharing options...
72westy Posted August 28, 2020 Share Posted August 28, 2020 Just finished running the F-14 and frames were great. I'm running locked at 60fps. Low or high altitude. System 1: Windows 10 Pro 22H2 Build 19045.4123 - Core i7 3770K/Gigabyte GA-Z68XP-UD3 (BIOS F-10)/32GB G-Skill Trident X DDR3 CL7-8-8-24/Asus RTX 2070 OC 8GB - drivers 551.61/LG Blue Ray DL Burner/1TB Crucial MX 500 SSD/(x2)1TBMushkinRAWSSDs/2TB PNY CS900 SSD/Corsair RM750w PSU/Rosewill Mid Challenger Tower/34" LG LED Ultrawide 2560x1080p/Saitek X56 HOTAS/TrackIR 5 Pro/Thermaltake Tt esports Commander Gear Combo/Oculus Quest 2/TM 2xMFD Cougar/InateckPCIeUSB3.2KU5211-R System 2: Windows 11 Home 23H2 22631.3447 - MSI Codex Series R2 B14NUC7-095US - i7 14700F/MSI Pro B760 VC Wifi/32GB DDR5 5600mhz RAM/RTX 4060/2TB nVME SSD/4TB 2.5in SSD/650w Gold PSU Link to comment Share on other sites More sharing options...
draconus Posted August 28, 2020 Share Posted August 28, 2020 Just finished running the F-14 and frames were great. I'm running locked at 60fps. Low or high altitude. Even in Vegas or on the Supercarrier? I doubt it. Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
72westy Posted August 28, 2020 Share Posted August 28, 2020 Even in Vegas or on the Supercarrier? I doubt it. Yes System 1: Windows 10 Pro 22H2 Build 19045.4123 - Core i7 3770K/Gigabyte GA-Z68XP-UD3 (BIOS F-10)/32GB G-Skill Trident X DDR3 CL7-8-8-24/Asus RTX 2070 OC 8GB - drivers 551.61/LG Blue Ray DL Burner/1TB Crucial MX 500 SSD/(x2)1TBMushkinRAWSSDs/2TB PNY CS900 SSD/Corsair RM750w PSU/Rosewill Mid Challenger Tower/34" LG LED Ultrawide 2560x1080p/Saitek X56 HOTAS/TrackIR 5 Pro/Thermaltake Tt esports Commander Gear Combo/Oculus Quest 2/TM 2xMFD Cougar/InateckPCIeUSB3.2KU5211-R System 2: Windows 11 Home 23H2 22631.3447 - MSI Codex Series R2 B14NUC7-095US - i7 14700F/MSI Pro B760 VC Wifi/32GB DDR5 5600mhz RAM/RTX 4060/2TB nVME SSD/4TB 2.5in SSD/650w Gold PSU Link to comment Share on other sites More sharing options...
Milopapa Posted August 28, 2020 Share Posted August 28, 2020 Frames were great. I'm running locked at 60fps. Low or high altitude. I used to run 75fps in VR (Pimax 8K-X) so I wouldn't call 60fps on a monitor great by any measure. Now it's running at ~45-50. PC HW: i5 3770k@4.6GHz | Asus 1080Ti | 16GB DDR3 | Samsung 850 EVO | MSI MPower Z77 Input: MS FFB2 w/ F-16 FLCS grip | CH Pro Throttle | MFG Crosswind | HTC Vive DCS modules: F-14, FW-190, P-51, Bf109, UH1, Mi-8, FC3, CE2 Link to comment Share on other sites More sharing options...
72westy Posted August 28, 2020 Share Posted August 28, 2020 Try going into the NVIDIA control panel and adjust.... Power Management Mode: Prefer Maximum Performance Texture Filtering - Quality: High Performance System 1: Windows 10 Pro 22H2 Build 19045.4123 - Core i7 3770K/Gigabyte GA-Z68XP-UD3 (BIOS F-10)/32GB G-Skill Trident X DDR3 CL7-8-8-24/Asus RTX 2070 OC 8GB - drivers 551.61/LG Blue Ray DL Burner/1TB Crucial MX 500 SSD/(x2)1TBMushkinRAWSSDs/2TB PNY CS900 SSD/Corsair RM750w PSU/Rosewill Mid Challenger Tower/34" LG LED Ultrawide 2560x1080p/Saitek X56 HOTAS/TrackIR 5 Pro/Thermaltake Tt esports Commander Gear Combo/Oculus Quest 2/TM 2xMFD Cougar/InateckPCIeUSB3.2KU5211-R System 2: Windows 11 Home 23H2 22631.3447 - MSI Codex Series R2 B14NUC7-095US - i7 14700F/MSI Pro B760 VC Wifi/32GB DDR5 5600mhz RAM/RTX 4060/2TB nVME SSD/4TB 2.5in SSD/650w Gold PSU Link to comment Share on other sites More sharing options...
72westy Posted August 28, 2020 Share Posted August 28, 2020 I used to run 75fps in VR (Pimax 8K-X) so I wouldn't call 60fps on a monitor great by any measure. Now it's running at ~45-50. 60fps is great for a sim. This isn't a first person shooter. More than sufficient. I have vsync enabled in DCS. System 1: Windows 10 Pro 22H2 Build 19045.4123 - Core i7 3770K/Gigabyte GA-Z68XP-UD3 (BIOS F-10)/32GB G-Skill Trident X DDR3 CL7-8-8-24/Asus RTX 2070 OC 8GB - drivers 551.61/LG Blue Ray DL Burner/1TB Crucial MX 500 SSD/(x2)1TBMushkinRAWSSDs/2TB PNY CS900 SSD/Corsair RM750w PSU/Rosewill Mid Challenger Tower/34" LG LED Ultrawide 2560x1080p/Saitek X56 HOTAS/TrackIR 5 Pro/Thermaltake Tt esports Commander Gear Combo/Oculus Quest 2/TM 2xMFD Cougar/InateckPCIeUSB3.2KU5211-R System 2: Windows 11 Home 23H2 22631.3447 - MSI Codex Series R2 B14NUC7-095US - i7 14700F/MSI Pro B760 VC Wifi/32GB DDR5 5600mhz RAM/RTX 4060/2TB nVME SSD/4TB 2.5in SSD/650w Gold PSU Link to comment Share on other sites More sharing options...
Recommended Posts