Jump to content

[Official] SimShaker for Aviators


Recommended Posts

Ok I got it to do it again this morning.

 

What seems to be happening is that it's only playing the sample once at the start and once at the end of a loop. I'm not sure why. I'm extending and retracting the flaps.

 

Failure:

07:21:37.632  SimShaker for Aviators  Version 1.3.7.0
07:22:42.902  New AirFrame: F-14B
07:22:44.920  Sent: p1_6_6_1~1~40~1000000
07:22:44.920  Sent: p1_6_6_1~1~56~-1
07:22:44.920  6.Gun fire. File = p1_6_6_1: Start continued vibe, gain1 = 0.8 gain2 = 1 (28000)
07:22:44.920  6.Gun fire. File = p1_6_6_1
07:22:44.921  Sent: hp_4_0_4~1~12~1000000
07:22:44.921  Sent: hp_4_0_4~1~12~-1
07:22:44.921  Ground rolling. File = hp_4_0_4.: Start continued vibe, gain1 = 0.25 gain2 = 1 (6250)
07:22:44.921  4.Ground Bumps - rolling. File = hp_4_0_4.
07:22:44.922  Sent: p2_7_8_N~1~60~1
07:22:44.922  Sent: p2_7_8_N~1~78~1
07:22:44.922  7.LG moving tail. File = p2_7_8_N
07:22:44.923  Sent: p1_6_6_1~0~0~0
07:22:44.923  Sent: p1_6_6_1~0~0~0
07:22:44.924  6.Gun fire. File = p1_6_6_1: Stop continued vibe
07:22:44.924  Sent: hp_4_0_4~0~0~0
07:22:44.924  Sent: hp_4_0_4~0~0~0
07:22:44.924  Ground rolling. File = hp_4_0_4.: Stop continued vibe
07:22:45.952  Sent: p2_7_8_L~1~60~1
07:22:45.952  Sent: p2_7_8_L~1~78~1
07:22:45.953  7.LG moving Left Main. File = p2_7_8_L
07:22:45.953  Sent: p2_7_8_R~1~60~1
07:22:45.953  Sent: p2_7_8_R~1~78~1
07:22:45.954  7.LG moving Right Main. File = p2_7_8_R
07:22:45.954  Sent: p2_7_8_N~1~60~1
07:22:45.955  Sent: p2_7_8_N~1~78~1
07:22:45.955  7.LG moving Nose. File = p2_7_8_N
07:22:45.955  Sent: p1_7_0_2~1~40~1000000
07:22:45.956  Sent: p1_7_0_2~1~52~-1
07:22:45.956  LG moving: Start continued vibe, gain1 = 0.8 gain2 = 1 (26000)
07:22:45.956  Sent: hp_4_0_2~1~25~3
07:22:45.956  Sent: hp_4_0_2~1~25~3
07:22:45.956  Nose Gear TouchDown: G=1
07:22:45.957  Sent: hp_4_0_2R~1~25~2
07:22:45.957  Sent: hp_4_0_2R~1~25~2
07:22:45.957  Right Gear TouchDown: G=1
07:22:45.957  Sent: hp_4_0_2L~1~25~2
07:22:45.957  Sent: hp_4_0_2L~1~25~2
07:22:45.958  Left Gear TouchDown: G=1
07:22:45.958  Sent: p1_12_0_1~1~50~1000000
07:22:45.958  Sent: p1_12_0_1~1~50~-1
07:22:45.958  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:22:45.959  Sent: p2_1_left_engine_running_midfreq~1~28~1000000
07:22:45.959  Sent: p2_1_left_engine_running_midfreq~1~22~-1
07:22:45.959  1. Engine Rumble. File = p2_1_left_engine_running_midfreq: Start continued vibe, gain1 = 0.557627118644068 gain2 = 1 (11153)
07:22:45.959  Sent: p2_7_8_N~1~25~1
07:22:45.960  Sent: p2_7_8_N~1~25~1
07:22:45.960  Launchbar effect File = p2_7_8_N
07:22:46.085  Sent: p1_12_0_1~0~0~0
07:22:46.085  Sent: p1_12_0_1~0~0~0
07:22:46.086  12.TE Flaps Vibe : Stop continued vibe
07:22:46.152  Sent: p1_7_0_2~0~0~0
07:22:46.152  Sent: p1_7_0_2~0~0~0
07:22:46.153  LG moving: Stop continued vibe
07:22:47.986  Sent: p2_1_left_engine_running_midfreq~4~29
07:22:47.986  Sent: p2_1_left_engine_running_midfreq~4~23
07:22:47.987  1. Engine Rumble. File = p2_1_left_engine_running_midfreq: Change gain, gain1 = 0.571186440677966 gain2 = 1 (11424)
07:22:47.987  Sent: p2_7_8_N~1~25~1
07:22:47.988  Sent: p2_7_8_N~1~25~1
07:22:47.988  Launchbar effect File = p2_7_8_N
07:22:48.052  Sent: p1_12_0_1~1~50~1000000
07:22:48.052  Sent: p1_12_0_1~1~50~-1
07:22:48.053  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:22:48.186  Sent: p1_12_0_1~0~0~0
07:22:48.186  Sent: p1_12_0_1~0~0~0
07:22:48.187  12.TE Flaps Vibe : Stop continued vibe
07:22:50.054  Sent: p2_1_left_engine_running_midfreq~4~28
07:22:50.054  Sent: p2_1_left_engine_running_midfreq~4~23
07:22:50.055  1. Engine Rumble. File = p2_1_left_engine_running_midfreq: Change gain, gain1 = 0.564406779661017 gain2 = 1 (11288)
07:22:51.138  Sent: p1_12_0_1~1~50~1000000
07:22:51.138  Sent: p1_12_0_1~1~50~-1
07:22:51.138  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:22:51.271  Sent: p1_12_0_1~0~0~0
07:22:51.271  Sent: p1_12_0_1~0~0~0
07:22:51.272  12.TE Flaps Vibe : Stop continued vibe
07:22:52.171  Sent: p1_12_0_1~1~50~1000000
07:22:52.171  Sent: p1_12_0_1~1~50~-1
07:22:52.171  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:22:52.305  Sent: p1_12_0_1~0~0~0
07:22:52.306  Sent: p1_12_0_1~0~0~0
07:22:52.306  12.TE Flaps Vibe : Stop continued vibe
07:22:53.171  Sent: p1_12_0_1~1~50~1000000
07:22:53.171  Sent: p1_12_0_1~1~50~-1
07:22:53.172  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:22:53.305  Sent: p1_12_0_1~0~0~0
07:22:53.305  Sent: p1_12_0_1~0~0~0
07:22:53.306  12.TE Flaps Vibe : Stop continued vibe
07:22:55.172  Sent: p1_12_0_1~1~50~1000000
07:22:55.173  Sent: p1_12_0_1~1~50~-1
07:22:55.173  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:22:55.308  Sent: p1_12_0_1~0~0~0
07:22:55.308  Sent: p1_12_0_1~0~0~0
07:22:55.308  12.TE Flaps Vibe : Stop continued vibe
07:22:58.158  Sent: p2_1_left_engine_running_midfreq~4~28
07:22:58.158  Sent: p2_1_left_engine_running_midfreq~4~22
07:22:58.158  1. Engine Rumble. File = p2_1_left_engine_running_midfreq: Change gain, gain1 = 0.557627118644068 gain2 = 1 (11153)
07:22:59.191  Sent: p1_12_0_1~1~50~1000000
07:22:59.191  Sent: p1_12_0_1~1~50~-1
07:22:59.192  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:22:59.324  Sent: p1_12_0_1~0~0~0
07:22:59.324  Sent: p1_12_0_1~0~0~0
07:22:59.325  12.TE Flaps Vibe : Stop continued vibe
07:23:00.258  Sent: p1_12_0_1~1~50~1000000
07:23:00.258  Sent: p1_12_0_1~1~50~-1
07:23:00.259  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:23:00.392  Sent: p1_12_0_1~0~0~0
07:23:00.392  Sent: p1_12_0_1~0~0~0
07:23:00.393  12.TE Flaps Vibe : Stop continued vibe
07:23:01.325  Sent: p1_12_0_1~1~50~1000000
07:23:01.325  Sent: p1_12_0_1~1~50~-1
07:23:01.326  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:23:01.425  Sent: p1_12_0_1~0~0~0
07:23:01.425  Sent: p1_12_0_1~0~0~0
07:23:01.427  12.TE Flaps Vibe : Stop continued vibe
07:23:03.393  Sent: p1_12_0_1~1~50~1000000
07:23:03.393  Sent: p1_12_0_1~1~50~-1
07:23:03.393  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:23:03.493  Sent: p1_12_0_1~0~0~0
07:23:03.494  Sent: p1_12_0_1~0~0~0
07:23:03.494  12.TE Flaps Vibe : Stop continued vibe
07:23:04.360  Sent: p1_12_0_1~1~50~1000000
07:23:04.360  Sent: p1_12_0_1~1~50~-1
07:23:04.361  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:23:04.494  Sent: p1_12_0_1~0~0~0
07:23:04.494  Sent: p1_12_0_1~0~0~0
07:23:04.494  12.TE Flaps Vibe : Stop continued vibe
07:23:05.328  Sent: p1_12_0_1~1~50~1000000
07:23:05.328  Sent: p1_12_0_1~1~50~-1
07:23:05.329  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:23:05.427  Sent: p1_12_0_1~0~0~0
07:23:05.428  Sent: p1_12_0_1~0~0~0
07:23:05.428  12.TE Flaps Vibe : Stop continued vibe
07:23:07.363  Sent: p1_12_0_1~1~50~1000000
07:23:07.363  Sent: p1_12_0_1~1~50~-1
07:23:07.364  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
07:23:07.496  Sent: p1_12_0_1~0~0~0
07:23:07.496  Sent: p1_12_0_1~0~0~0
07:23:07.498  12.TE Flaps Vibe : Stop continued vibe

Thank you for using SimShaker software!
Visit me at https://andres.shop to find more interesting offers!
Happy flying :)
7:21:38.0 SimShaker Sound Module | Version 2.10 
7:21:38.12 Got settings from Soundmodule.cfg
7:21:38.168 UDP Receiver started
7:22:44.921 Received: p1_6_6_1~1~56~-1
7:22:44.923 Received: hp_4_0_4~1~12~-1
7:22:44.924 Received: p2_7_8_N~1~78~1
7:22:44.927 Received: p1_6_6_1~0~0~0
7:22:44.927 Received: hp_4_0_4~0~0~0
7:22:44.956 Compressor gain is set to 96%
7:22:44.967 Compressor gain is set to 94%
7:22:44.989 Compressor gain is set to 99%
7:22:45.0 Compressor gain is set to 100%
7:22:45.952 Received: p2_7_8_L~1~78~1
7:22:45.953 Received: p2_7_8_R~1~78~1
7:22:45.955 Received: p2_7_8_N~1~78~1
7:22:45.955 p2_7_8_N sample is already playing, start command skipped
7:22:45.958 Received: p1_7_0_2~1~52~-1
7:22:45.959 Received: hp_4_0_2~1~25~3
7:22:45.959 Received: hp_4_0_2R~1~25~2
7:22:45.960 Received: hp_4_0_2L~1~25~2
7:22:45.960 Received: p1_12_0_1~1~50~-1
7:22:45.961 Received: p2_1_left_engine_running_midfreq~1~22~-1
7:22:45.961 Received: p2_7_8_N~1~25~1
7:22:45.961 p2_7_8_N sample is already playing, start command skipped
7:22:45.980 Compressor gain is set to 99%
7:22:45.991 Compressor gain is set to 75%
7:22:46.1 Compressor gain is set to 55%
7:22:46.12 Compressor gain is set to 52%
7:22:46.23 Compressor gain is set to 57%
7:22:46.35 Compressor gain is set to 55%
7:22:46.46 Compressor gain is set to 61%
7:22:46.46 Compressor gain is set to 74%
7:22:46.69 Compressor gain is set to 84%
7:22:46.81 Compressor gain is set to 93%
7:22:46.85 Received: p1_12_0_1~0~0~0
7:22:46.92 Compressor gain is set to 100%
7:22:46.152 Received: p1_7_0_2~0~0~0
7:22:47.986 Received: p2_1_left_engine_running_midfreq~4~23
7:22:47.988 Received: p2_7_8_N~1~25~1
7:22:48.52 Received: p1_12_0_1~1~50~-1
7:22:48.186 Received: p1_12_0_1~0~0~0
7:22:50.54 Received: p2_1_left_engine_running_midfreq~4~23
7:22:51.138 Received: p1_12_0_1~1~50~-1
7:22:51.271 Received: p1_12_0_1~0~0~0
7:22:52.171 Received: p1_12_0_1~1~50~-1
7:22:52.305 Received: p1_12_0_1~0~0~0
7:22:53.171 Received: p1_12_0_1~1~50~-1
7:22:53.305 Received: p1_12_0_1~0~0~0
7:22:55.173 Received: p1_12_0_1~1~50~-1
7:22:55.308 Received: p1_12_0_1~0~0~0
7:22:58.158 Received: p2_1_left_engine_running_midfreq~4~22
7:22:59.191 Received: p1_12_0_1~1~50~-1
7:22:59.324 Received: p1_12_0_1~0~0~0
7:23:0.258 Received: p1_12_0_1~1~50~-1
7:23:0.392 Received: p1_12_0_1~0~0~0
7:23:1.325 Received: p1_12_0_1~1~50~-1
7:23:1.425 Received: p1_12_0_1~0~0~0
7:23:3.393 Received: p1_12_0_1~1~50~-1
7:23:3.493 Received: p1_12_0_1~0~0~0
7:23:4.360 Received: p1_12_0_1~1~50~-1
7:23:4.494 Received: p1_12_0_1~0~0~0
7:23:5.328 Received: p1_12_0_1~1~50~-1
7:23:5.427 Received: p1_12_0_1~0~0~0
7:23:7.364 Received: p1_12_0_1~1~50~-1
7:23:7.496 Received: p1_12_0_1~0~0~0

 

I can test the sound in the sound module just fine, if I pick flaps extend/retract and playback 10-15 repetitions it vibrates normally. It seems to be something in the communication between SimShaker for Aviators and the Sound Module that's breaking down.

 

Success:

 

09:25:02.421  SimShaker for Aviators  Version 1.3.7.0
09:26:08.655  New AirFrame: F-14B
09:26:10.689  Sent: p1_6_6_1~1~40~1000000
09:26:10.690  Sent: p1_6_6_1~1~56~-1
09:26:10.690  6.Gun fire. File = p1_6_6_1: Start continued vibe, gain1 = 0.8 gain2 = 1 (28000)
09:26:10.690  6.Gun fire. File = p1_6_6_1
09:26:10.691  Sent: hp_4_0_4~1~12~1000000
09:26:10.691  Sent: hp_4_0_4~1~12~-1
09:26:10.691  Ground rolling. File = hp_4_0_4.: Start continued vibe, gain1 = 0.25 gain2 = 1 (6250)
09:26:10.691  4.Ground Bumps - rolling. File = hp_4_0_4.
09:26:10.692  Sent: p2_7_8_N~1~60~1
09:26:10.692  Sent: p2_7_8_N~1~78~1
09:26:10.692  7.LG moving tail. File = p2_7_8_N
09:26:10.693  Sent: p1_6_6_1~0~0~0
09:26:10.693  Sent: p1_6_6_1~0~0~0
09:26:10.694  6.Gun fire. File = p1_6_6_1: Stop continued vibe
09:26:10.694  Sent: hp_4_0_4~0~0~0
09:26:10.694  Sent: hp_4_0_4~0~0~0
09:26:10.694  Ground rolling. File = hp_4_0_4.: Stop continued vibe
09:26:10.694  Sent: so_99_3_1L~1~9~1000000
09:26:10.695  Sent: so_99_3_1L~1~6~-1
09:26:10.695  G+ feeling left side: Start continued vibe, gain1 = 0.182857142857143 gain2 = 1 (3200)
09:26:10.695  Sent: so_99_3_1R~1~9~1000000
09:26:10.695  Sent: so_99_3_1R~1~6~-1
09:26:10.696  G+ feeling right side: Start continued vibe, gain1 = 0.182857142857143 gain2 = 1 (3200)
09:26:10.696  Sent: so_99_3_1L~4~7
09:26:10.696  Sent: so_99_3_1L~4~5
09:26:10.696  G+ feeling left side: Change gain, gain1 = 0.145714285714286 gain2 = 1 (2550)
09:26:10.697  Sent: so_99_3_1R~4~7
09:26:10.697  Sent: so_99_3_1R~4~5
09:26:10.697  G+ feeling right side: Change gain, gain1 = 0.145714285714286 gain2 = 1 (2550)
09:26:10.698  Sent: so_99_3_1L~4~9
09:26:10.698  Sent: so_99_3_1L~4~6
09:26:10.698  G+ feeling left side: Change gain, gain1 = 0.185714285714286 gain2 = 1 (3250)
09:26:10.698  Sent: so_99_3_1R~4~9
09:26:10.699  Sent: so_99_3_1R~4~6
09:26:10.699  G+ feeling right side: Change gain, gain1 = 0.185714285714286 gain2 = 1 (3250)
09:26:10.699  Sent: so_99_3_1L~4~7
09:26:10.699  Sent: so_99_3_1L~4~5
09:26:10.700  G+ feeling left side: Change gain, gain1 = 0.148571428571429 gain2 = 1 (2600)
09:26:10.700  Sent: so_99_3_1R~4~7
09:26:10.700  Sent: so_99_3_1R~4~5
09:26:10.700  G+ feeling right side: Change gain, gain1 = 0.148571428571429 gain2 = 1 (2600)
09:26:10.701  Sent: so_99_3_1L~4~9
09:26:10.701  Sent: so_99_3_1L~4~7
09:26:10.701  G+ feeling left side: Change gain, gain1 = 0.187142857142857 gain2 = 1 (3275)
09:26:10.702  Sent: so_99_3_1R~4~9
09:26:10.702  Sent: so_99_3_1R~4~7
09:26:10.702  G+ feeling right side: Change gain, gain1 = 0.187142857142857 gain2 = 1 (3275)
09:26:10.703  Sent: so_99_3_1L~0~0~0
09:26:10.703  Sent: so_99_3_1L~0~0~0
09:26:10.703  G+ feeling left side: Stop continued vibe
09:26:10.703  Sent: so_99_3_1R~0~0~0
09:26:10.704  Sent: so_99_3_1R~0~0~0
09:26:10.704  G+ feeling right side: Stop continued vibe
09:26:10.704  Sent: hp_4_0_2~1~31~3
09:26:10.704  Sent: hp_4_0_2~1~31~3
09:26:10.704  Nose Gear TouchDown: G=-0.48
09:26:10.705  Sent: hp_4_0_2R~1~31~2
09:26:10.705  Sent: hp_4_0_2R~1~31~2
09:26:10.705  Right Gear TouchDown: G=-0.48
09:26:10.706  Sent: hp_4_0_2L~1~31~2
09:26:10.706  Sent: hp_4_0_2L~1~31~2
09:26:10.706  Left Gear TouchDown: G=-0.48
09:26:11.706  Sent: p2_7_8_L~1~60~1
09:26:11.706  Sent: p2_7_8_L~1~78~1
09:26:11.707  7.LG moving Left Main. File = p2_7_8_L
09:26:11.707  Sent: p2_7_8_R~1~60~1
09:26:11.707  Sent: p2_7_8_R~1~78~1
09:26:11.708  7.LG moving Right Main. File = p2_7_8_R
09:26:11.708  Sent: p2_7_8_N~1~60~1
09:26:11.708  Sent: p2_7_8_N~1~78~1
09:26:11.709  7.LG moving Nose. File = p2_7_8_N
09:26:11.709  Sent: p1_7_0_2~1~40~1000000
09:26:11.709  Sent: p1_7_0_2~1~52~-1
09:26:11.709  LG moving: Start continued vibe, gain1 = 0.8 gain2 = 1 (26000)
09:26:11.710  Sent: hp_4_0_2~1~25~3
09:26:11.710  Sent: hp_4_0_2~1~25~3
09:26:11.710  Nose Gear TouchDown: G=1
09:26:11.710  Sent: hp_4_0_2R~1~25~2
09:26:11.710  Sent: hp_4_0_2R~1~25~2
09:26:11.711  Right Gear TouchDown: G=1
09:26:11.711  Sent: hp_4_0_2L~1~25~2
09:26:11.711  Sent: hp_4_0_2L~1~25~2
09:26:11.711  Left Gear TouchDown: G=1
09:26:11.711  Sent: p2_1_left_engine_running_midfreq~1~28~1000000
09:26:11.712  Sent: p2_1_left_engine_running_midfreq~1~22~-1
09:26:11.712  1. Engine Rumble. File = p2_1_left_engine_running_midfreq: Start continued vibe, gain1 = 0.557627118644068 gain2 = 1 (11153)
09:26:11.712  Sent: p2_1_right_engine_running_midfreq~1~28~1000000
09:26:11.712  Sent: p2_1_right_engine_running_midfreq~1~22~-1
09:26:11.713  1. Engine Rumble. File = p2_1_right_engine_running_midfreq: Start continued vibe, gain1 = 0.557627118644068 gain2 = 1 (11153)
09:26:11.713  Sent: p2_7_8_N~1~25~1
09:26:11.713  Sent: p2_7_8_N~1~25~1
09:26:11.714  Launchbar effect File = p2_7_8_N
09:26:11.791  Sent: p1_12_0_1~1~50~1000000
09:26:11.791  Sent: p1_12_0_1~1~50~-1
09:26:11.791  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
09:26:11.856  Sent: p1_7_0_2~0~0~0
09:26:11.856  Sent: p1_7_0_2~0~0~0
09:26:11.857  LG moving: Stop continued vibe
09:26:11.906  Sent: p1_12_0_1~0~0~0
09:26:11.906  Sent: p1_12_0_1~0~0~0
09:26:11.906  12.TE Flaps Vibe : Stop continued vibe
09:26:14.557  Sent: p2_1_left_engine_running_midfreq~4~28
09:26:14.557  Sent: p2_1_left_engine_running_midfreq~4~23
09:26:14.557  1. Engine Rumble. File = p2_1_left_engine_running_midfreq: Change gain, gain1 = 0.564406779661017 gain2 = 1 (11288)
09:26:14.558  Sent: p2_1_right_engine_running_midfreq~4~28
09:26:14.558  Sent: p2_1_right_engine_running_midfreq~4~23
09:26:14.559  1. Engine Rumble. File = p2_1_right_engine_running_midfreq: Change gain, gain1 = 0.564406779661017 gain2 = 1 (11288)
09:26:16.474  Sent: p1_12_0_1~1~50~1000000
09:26:16.475  Sent: p1_12_0_1~1~50~-1
09:26:16.475  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
09:26:18.426  Sent: p1_12_0_1~0~0~0
09:26:18.426  Sent: p1_12_0_1~0~0~0
09:26:18.427  12.TE Flaps Vibe : Stop continued vibe
09:26:18.542  Sent: p1_12_0_1~1~50~1000000
09:26:18.543  Sent: p1_12_0_1~1~50~-1
09:26:18.543  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
09:26:18.642  Sent: p1_12_0_1~0~0~0
09:26:18.642  Sent: p1_12_0_1~0~0~0
09:26:18.643  12.TE Flaps Vibe : Stop continued vibe
09:26:19.726  Sent: p1_12_0_1~1~50~1000000
09:26:19.727  Sent: p1_12_0_1~1~50~-1
09:26:19.727  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
09:26:21.944  Sent: p1_12_0_1~0~0~0
09:26:21.945  Sent: p1_12_0_1~0~0~0
09:26:21.945  12.TE Flaps Vibe : Stop continued vibe
09:26:22.645  Sent: p2_1_left_engine_running_midfreq~4~28
09:26:22.645  Sent: p2_1_left_engine_running_midfreq~4~22
09:26:22.645  1. Engine Rumble. File = p2_1_left_engine_running_midfreq: Change gain, gain1 = 0.557627118644068 gain2 = 1 (11153)
09:26:22.646  Sent: p2_1_right_engine_running_midfreq~4~28
09:26:22.646  Sent: p2_1_right_engine_running_midfreq~4~22
09:26:22.647  1. Engine Rumble. File = p2_1_right_engine_running_midfreq: Change gain, gain1 = 0.557627118644068 gain2 = 1 (11153)
09:26:43.787  Sent: p1_12_0_1~1~50~1000000
09:26:43.788  Sent: p1_12_0_1~1~50~-1
09:26:43.788  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
09:26:45.756  Sent: p1_12_0_1~0~0~0
09:26:45.756  Sent: p1_12_0_1~0~0~0
09:26:45.756  12.TE Flaps Vibe : Stop continued vibe
09:26:45.873  Sent: p1_12_0_1~1~50~1000000
09:26:45.873  Sent: p1_12_0_1~1~50~-1
09:26:45.874  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
09:26:46.005  Sent: p1_12_0_1~0~0~0
09:26:46.006  Sent: p1_12_0_1~0~0~0
09:26:46.007  12.TE Flaps Vibe : Stop continued vibe
09:26:46.956  Sent: p1_12_0_1~1~50~1000000
09:26:46.957  Sent: p1_12_0_1~1~50~-1
09:26:46.958  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
09:26:49.040  Sent: p1_12_0_1~0~0~0
09:26:49.041  Sent: p1_12_0_1~0~0~0
09:26:49.041  12.TE Flaps Vibe : Stop continued vibe
09:26:49.173  Sent: p1_12_0_1~1~50~1000000
09:26:49.174  Sent: p1_12_0_1~1~50~-1
09:26:49.174  12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)
09:26:49.290  Sent: p1_12_0_1~0~0~0
09:26:49.290  Sent: p1_12_0_1~0~0~0
09:26:49.291  12.TE Flaps Vibe : Stop continued vibe

********************************************************************************************************

Thank you for using SimShaker software!
Visit me at https://andres.shop to find more interesting offers!
Happy flying :)
9:25:29.766 SimShaker Sound Module | Version 2.10 
9:25:29.777 Got settings from Soundmodule.cfg
9:25:29.931 UDP Receiver started
9:26:10.690 Received: p1_6_6_1~1~56~-1
9:26:10.693 Received: hp_4_0_4~1~12~-1
9:26:10.694 Received: p2_7_8_N~1~78~1
9:26:10.697 Received: p1_6_6_1~0~0~0
9:26:10.697 Received: hp_4_0_4~0~0~0
9:26:10.698 Received: so_99_3_1L~1~6~-1
9:26:10.698 Received: so_99_3_1R~1~6~-1
9:26:10.699 Received: so_99_3_1L~4~5
9:26:10.699 Received: so_99_3_1R~4~5
9:26:10.700 Received: so_99_3_1L~4~6
9:26:10.700 Received: so_99_3_1R~4~6
9:26:10.701 Received: so_99_3_1L~4~5
9:26:10.701 Received: so_99_3_1R~4~5
9:26:10.702 Received: so_99_3_1L~4~7
9:26:10.702 Received: so_99_3_1R~4~7
9:26:10.703 Received: so_99_3_1L~0~0~0
9:26:10.703 Received: so_99_3_1R~0~0~0
9:26:10.704 Received: hp_4_0_2~1~31~3
9:26:10.705 Received: hp_4_0_2R~1~31~2
9:26:10.706 Received: hp_4_0_2L~1~31~2
9:26:10.719 Compressor gain is set to 99%
9:26:10.730 Compressor gain is set to 81%
9:26:10.741 Compressor gain is set to 65%
9:26:10.752 Compressor gain is set to 59%
9:26:10.763 Compressor gain is set to 54%
9:26:10.774 Compressor gain is set to 60%
9:26:10.785 Compressor gain is set to 65%
9:26:10.797 Compressor gain is set to 81%
9:26:10.799 Compressor gain is set to 91%
9:26:10.811 Compressor gain is set to 100%
9:26:11.706 Received: p2_7_8_L~1~78~1
9:26:11.707 Received: p2_7_8_R~1~78~1
9:26:11.708 Received: p2_7_8_N~1~78~1
9:26:11.709 p2_7_8_N sample is already playing, start command skipped
9:26:11.714 Received: p1_7_0_2~1~52~-1
9:26:11.714 Received: hp_4_0_2~1~25~3
9:26:11.714 Received: hp_4_0_2R~1~25~2
9:26:11.715 Received: hp_4_0_2L~1~25~2
9:26:11.715 Received: p2_1_left_engine_running_midfreq~1~22~-1
9:26:11.716 Received: p2_1_right_engine_running_midfreq~1~22~-1
9:26:11.716 Received: p2_7_8_N~1~25~1
9:26:11.716 p2_7_8_N sample is already playing, start command skipped
9:26:11.727 Compressor gain is set to 79%
9:26:11.738 Compressor gain is set to 51%
9:26:11.750 Compressor gain is set to 44%
9:26:11.762 Compressor gain is set to 41%
9:26:11.774 Compressor gain is set to 43%
9:26:11.786 Compressor gain is set to 48%
9:26:11.787 Compressor gain is set to 67%
9:26:11.791 Received: p1_12_0_1~1~50~-1
9:26:11.799 Compressor gain is set to 77%
9:26:11.810 Compressor gain is set to 95%
9:26:11.821 Compressor gain is set to 100%
9:26:11.856 Received: p1_7_0_2~0~0~0
9:26:11.906 Received: p1_12_0_1~0~0~0
9:26:14.557 Received: p2_1_left_engine_running_midfreq~4~23
9:26:14.558 Received: p2_1_right_engine_running_midfreq~4~23
9:26:16.475 Received: p1_12_0_1~1~50~-1
9:26:18.426 Received: p1_12_0_1~0~0~0
9:26:18.543 Received: p1_12_0_1~1~50~-1
9:26:18.642 Received: p1_12_0_1~0~0~0
9:26:19.727 Received: p1_12_0_1~1~50~-1
9:26:21.944 Received: p1_12_0_1~0~0~0
9:26:22.645 Received: p2_1_left_engine_running_midfreq~4~22
9:26:22.646 Received: p2_1_right_engine_running_midfreq~4~22
9:26:43.788 Received: p1_12_0_1~1~50~-1
9:26:45.756 Received: p1_12_0_1~0~0~0
9:26:45.874 Received: p1_12_0_1~1~50~-1
9:26:46.5 Received: p1_12_0_1~0~0~0
9:26:46.957 Received: p1_12_0_1~1~50~-1
9:26:49.40 Received: p1_12_0_1~0~0~0
9:26:49.174 Received: p1_12_0_1~1~50~-1
9:26:49.290 Received: p1_12_0_1~0~0~0


Edited by FoxTwo
Link to comment
Share on other sites

Thank you for the logs.

In "Failure" case it looks like this

07:23:03.393 12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)

07:23:03.493 Sent: p1_12_0_1~0~0~0

07:23:03.494 Sent: p1_12_0_1~0~0~0

07:23:03.494 12.TE Flaps Vibe : Stop continued vibe

 

Between Start continued vibe and Stop continued vibe it's about 0,1 sec. Very little to feel the vibration.

 

 

In "Success" case along with short intervals it may look like this:

09:26:43.788 12.TE Flaps Vibe : Start continued vibe, gain1 = 1 gain2 = 1 (25000)

09:26:45.756 Sent: p1_12_0_1~0~0~0

09:26:45.756 Sent: p1_12_0_1~0~0~0

09:26:45.756 12.TE Flaps Vibe : Stop continued vibe

 

Between Start continued vibe and Stop continued vibe it's about 2 sec.

Which makes the vibration noticeable.

 

I'm not sure that's actually related to your logouts.

Gametrix JetSeats thread (in English) ,

SimShaker addon for bass-shakers thread (in English),

Andre's blog, downloads, manuals (in English).

 

 

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

I'm not sure that's actually related to your logouts.

 

I've just been able to 'fix' the issue by logging out and back in (fully restarting my Windows session). I don't know why that works.

 

Edit

Ok so I've been able to fix the problem WITHOUT logging in/out. After experiencing the issue again, I quit DCS and closed simshaker. I then closed all the normal background applications including Logitech Gaming Software, NZXT CAM, MSI Afterburner, Steam and the Battle.net launcher. Started simshaker for aviators, loaded back into DCS, and everything started working normally.

 

So it's one of those. My guess is it's NZXT CAM.


Edited by FoxTwo
updated info
Link to comment
Share on other sites

Can anyone assist with SAA install? I open the set up, down load it and open the SAA then I get a small box that lasts one second "Verifying application requirements, This may take a few moments." then it closes the app. Basically it dose not start. Tried to reinstall it several times. I have windows 10 Pro. And my virus protection turned off.? frustration from waiting 6 months for the REALTUS SEAT then the software is not working for DCS?

Link to comment
Share on other sites

f410 thx do I install the control centre software then SAA ? or Just SAA?

 

 

For which seat? For the Gametrix Jetseat you need to install the driver. For the ForceFell, SSA ships with the driver...

Link to comment
Share on other sites

Can anyone assist with SAA install? I open the set up, down load it and open the SAA then I get a small box that lasts one second "Verifying application requirements, This may take a few moments." then it closes the app. Basically it dose not start. Tried to reinstall it several times. I have windows 10 Pro. And my virus protection turned off.? frustration from waiting 6 months for the REALTUS SEAT then the software is not working for DCS?

 

Disregard

 

Managed to get it working and testing now. Anyone reading I think DCS needs to be running to get the SAA software to stay open , then make sure ForceFeel is selected in Service TAB!. Im still not sure how i got it working as i had may errors saying cannot connect to Microsft Flight sim?? I clicked Ignore as I don't have it installed. Will try xplane 11 shorty.

 

Form my first flight in VR its pretty amazing THX well done.

Link to comment
Share on other sites

Anyone reading I think DCS needs to be running to get the SAA software to stay open , then make sure ForceFeel is selected in Service TAB!.

Negative in my case, I open Oculus Home, Oculus Tray Tool and SSA.

Then I start DCS.

i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | DIY Collective | Virpil desk mount | VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 3x TM MFDs | 2x bass shakers pedal plate| SIMple SIMpit chair | WinWing TakeOff panel | PointCTRL v2 | Andre JetSeat | Winwing Hornet UFC | Winwing Viper ICP

FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle

Link to comment
Share on other sites

Hi,

 

 

it's been several weeks since I have a problem with SSA and DCS.

When I launch DCS and SSA in VR (Pimax 5k +) my helmet loses the tracking once in the cockpit of the plane.

I put the headset out of the detection field of the sensors and puts it on my head it recapts 1 sec and loses the tracking again.

 

If I run DCS without SSA booted everything works without problems.

 

I tried several combinations of USB and other connections and the problem is still there.

 

I have a PXAX 5K + VR headset and a Forcefeel realteus seat.

 

Someone would have a solution please?

 

 

I allow myself to trace my problem. Nobody had any tracking loss problem with Pimax and SSA? I have the same problem with Simshaker Wheel on Project cars 2, when the race begin, the simshaker start and the pimax lost the tracking.


Edited by AntoX
Link to comment
Share on other sites

I allow myself to trace my problem. Nobody had any tracking loss problem with Pimax and SSA? I have the same problem with Simshaker Wheel on Project cars 2, when the race begin, the simshaker start and the pimax lost the tracking.

I don't have a Pixma thus I can not really help with this issue... Maybe someone else in the community?

Link to comment
Share on other sites

Sorry, quick change of subject. I want to share a personal reflection on owning the Jetseat and a fun thing that happened recently:

 

For helicopters and the Mig-21, something like the Gametrix Jetseat from Andre is essential!

 

I bought a Jetseat and VR headset after hearing Windy, a former RAF Tornado F3 pilot, comment that DCS with a VR headset and a jetseat was almost as good as flying the real thing. His biggest praise for the jetseat was that it let you feel your Angle of Attack. I agree! This is very useful and all but essential for flying the Mig-21.

 

Just the other day, Windy and a few of us were flying the F-14 and playing around. Windy took a hit from an IR SAM and began to RTB back to the carrier complaining of all sorts of problems. Suddenly, Windy exclaimed "Woah!" and a few moments later began to laugh. He explained that he'd just heard and felt something like an explosion that he immediately recognized as an engine surge. He went on to say that he forgot that he was playing a game for a few moments, as he'd experienced this in real life while flying his Tornado, and that it sounded and felt almost exactly like the real thing.

 

Things like the Jetseat or similar add a lot of the "feel" of flying to the sim.

 

Thank you to everyone who makes, sells, supports, and writes software for the Jetseat! It really completes the VR experience. I can't fly without it!

Link to comment
Share on other sites

I allow myself to trace my problem. Nobody had any tracking loss problem with Pimax and SSA? I have the same problem with Simshaker Wheel on Project cars 2, when the race begin, the simshaker start and the pimax lost the tracking.

 

 

I have Pimax 5k+ and I have no problems with SSA or SS Wheels. I don't have the lighthouse sensors yet so not exactly the same case. Pimax gyro tracking works fine (well, at least as fine as it usually works) with SSA. Maybe you should try to disable lighthouse tracking from PiTool and see does it work with the gyro tracking.

Link to comment
Share on other sites

Hi again f410:

Still having the problem with getting my Helios profile to run along side SSA/Jetseat. Again Jetseat works fine when I set the repair export.lua button. If I don't set it, then my Helios profile works. Still in the dark. I did reach out to Capt Zeen and other's in the community. No response yet.

Link to comment
Share on other sites

BTW. I can't go without my Jetseat. I'm an Andre fan having purchased his seat as soon as I learned it was on the market. Also planning on upgrading to his next seat in the near term. Just purchased the SS Sound module to run my BK G2 Bass Shaker. Thanks again for your continued efforts to assist dedicated simmers.

Mike

Link to comment
Share on other sites

I have Pimax 5k+ and I have no problems with SSA or SS Wheels. I don't have the lighthouse sensors yet so not exactly the same case. Pimax gyro tracking works fine (well, at least as fine as it usually works) with SSA. Maybe you should try to disable lighthouse tracking from PiTool and see does it work with the gyro tracking.

 

 

Yes I tested and actually it works with the gyro tracking but if I put the lighthouse for all the axes in VR it does not work anymore with the simshakers.

 

 

This is very problematic because the gyro traking is much less accurate than the lighthouse, it does not allow to bend or get closer to the instruments, to look over the cockpit, and I must very often refocus it because it shifts.

 

 

It would be necessary to clarify to customers that simshakers are not compatible with the lighthouse or to find a software solution to correct the problem.

Link to comment
Share on other sites

Yes I tested and actually it works with the gyro tracking but if I put the lighthouse for all the axes in VR it does not work anymore with the simshakers.

 

 

This is very problematic because the gyro traking is much less accurate than the lighthouse, it does not allow to bend or get closer to the instruments, to look over the cockpit, and I must very often refocus it because it shifts.

 

 

It would be necessary to clarify to customers that simshakers are not compatible with the lighthouse or to find a software solution to correct the problem.

 

Well, I use HTC tracking stations (aka the Lighthouse tracking system) with Vive helmet along with SimShaker and have not noticed any issues so far. I don't think SimShaker can really interfere with HTC tracking. What if you start the game and SimShaker software having your ForceFeel pad disconnected from the PC? Will the problem persist?

Gametrix JetSeats thread (in English) ,

SimShaker addon for bass-shakers thread (in English),

Andre's blog, downloads, manuals (in English).

 

 

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

Sorry, quick change of subject. I want to share a personal reflection on owning the Jetseat and a fun thing that happened recently:

 

For helicopters and the Mig-21, something like the Gametrix Jetseat from Andre is essential!

 

I bought a Jetseat and VR headset after hearing Windy, a former RAF Tornado F3 pilot, comment that DCS with a VR headset and a jetseat was almost as good as flying the real thing. His biggest praise for the jetseat was that it let you feel your Angle of Attack. I agree! This is very useful and all but essential for flying the Mig-21.

 

Just the other day, Windy and a few of us were flying the F-14 and playing around. Windy took a hit from an IR SAM and began to RTB back to the carrier complaining of all sorts of problems. Suddenly, Windy exclaimed "Woah!" and a few moments later began to laugh. He explained that he'd just heard and felt something like an explosion that he immediately recognized as an engine surge. He went on to say that he forgot that he was playing a game for a few moments, as he'd experienced this in real life while flying his Tornado, and that it sounded and felt almost exactly like the real thing.

 

Things like the Jetseat or similar add a lot of the "feel" of flying to the sim.

 

Thank you to everyone who makes, sells, supports, and writes software for the Jetseat! It really completes the VR experience. I can't fly without it!

:-)

Link to comment
Share on other sites

Hello everyone! I am interested in a Jetseat. Unfortunately I am too late to the party and so the 908 is sold out. Could you help me out with these questions?

 

* Is there any chance of the 908 coming back?

* Is there anything comparable to the 908?

* Is there a big difference in the 901 (6 motors) vs the 908 (8 motors)?

* How much "plug&play" is this device?

* What are the dimensions of the 901/908 Jetseat (can't find this information on andre's shop website)

 

And lastly (maybe not the right place to ask): How is it compared to the Realtus ForceFeel?

 

Looking forward to your replis. Thanks!

Link to comment
Share on other sites

Hello everyone! I am interested in a Jetseat. Unfortunately I am too late to the party and so the 908 is sold out. Could you help me out with these questions?

 

* Is there any chance of the 908 coming back?

* Is there anything comparable to the 908?

* Is there a big difference in the 901 (6 motors) vs the 908 (8 motors)?

* How much "plug&play" is this device?

* What are the dimensions of the 901/908 Jetseat (can't find this information on andre's shop website)

 

And lastly (maybe not the right place to ask): How is it compared to the Realtus ForceFeel?

 

Looking forward to your replis. Thanks!

Hey iffoif,

I've nothing to do with selling/making the seats. Please use the correct thread or contact Andre directly...

Link to comment
Share on other sites

So I'm still having the problem where the repeat sounds sometimes aren't making it over to the sound module. It doesn't seem related to any of my background programs. If I close and allow Simshaker for Aviators to restart (while keeping the sound module running) it tends to start working. I'm not sure why sometimes it's fine and sometimes it's not. Engine rumble works, but I notice it when I try to unfold the wings or engage flaps in the F-14.

Link to comment
Share on other sites

Could you please try to trace if it depends on FPS rate?

 

It happens in both VR and out. VR is limited to about 45fps, I have vsync enabled when I play on my monitor (so 60fps).

 

I'm going to load up wireshark and see if I can capture the UDP traffic between the apps when I'm having and not having the issue.

Link to comment
Share on other sites

Got my jetseat FSE yesterday and damn it is worth every penny. With the large fov with the pimax along with this jetseat it adds so much immersion along with actually being able to feel the aircraft instead of relying on visuals and sound. Just awesome stuff thanks Andre for this product.

Link to comment
Share on other sites

Got my jetseat FSE yesterday and damn it is worth every penny. With the large fov with the pimax along with this jetseat it adds so much immersion along with actually being able to feel the aircraft instead of relying on visuals and sound. Just awesome stuff thanks Andre for this product.

 

Thank you for the update! That was a quick delivery!

Please pay attention that this is offtopic for this thread. An appropriate thread is https://forums.eagle.ru/showthread.php?p=3895202

Gametrix JetSeats thread (in English) ,

SimShaker addon for bass-shakers thread (in English),

Andre's blog, downloads, manuals (in English).

 

 

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...