Yurgon Posted May 28, 2017 Share Posted May 28, 2017 I have problem with jtac not telling me anything when after the 9line and i have to be ready for remarks..i tried many times but the jtac won't go on. Unfortunately that's a known problem with the in-game JTAC. It worked okay when the campaign was created and then got broken somewhere down the road. There's nothing Baltic Dragon can do to fix this, so let's hope that with the release of Normandy, the team at ED will be able to fix this problem soon. Then another problem i have (but maybe i am doing something wrong here) when the jtac gives me the coordinate in 9line and i input knXXXXXX (can't remember but are 6 digit coordinates) it appears at 359 nm from me, or 140 (if i change also to 37t)...probably i am missing some 0 after or before?or the jtac is giving wrong coordinates? Yeah, the most common problem here is the grid zone designator being off. Take a look at this map with GZDs and you'll see where 37T and 38T run through western Georgia: The UTM grid. If that's not the problem, you're probably doing something wrong. :) MGRS coords can be given with 2, 4, 6, 8, or 10 digits. The DCS in-game JTAC always gives 6 digits and thus 100x100 meter precision. Be sure to enter these coords just like they were given, without any space characters: KN 123 456 => Input into CDU: KN123456 If that still doesn't work, you should probably post a track. Link to comment Share on other sites More sharing options...
VirusAM Posted May 28, 2017 Share Posted May 28, 2017 . Yeah, the most common problem here is the grid zone designator being off. Take a look at this map with GZDs and you'll see where 37T and 38T run through western Georgia: The UTM grid. If that's not the problem, you're probably doing something wrong. :) MGRS coords can be given with 2, 4, 6, 8, or 10 digits. The DCS in-game JTAC always gives 6 digits and thus 100x100 meter precision. Be sure to enter these coords just like they were given, without any space characters: KN 123 456 => Input into CDU: KN123456 If that still doesn't work, you should probably post a track. Thanks for the reply, anyway it is exactly how i input the coordinates into the cdu...then i tried both 37t and 38t but as i wrote before both seems wrong (140 and 359 nm far from steerpoint 2). I will try again the mission as soon as i can, and if still not working i will post the track... Thanks again R7-5800X3D 64GB RTX-4090 LG-38GN950 Valve Index VPForce Rhino FFB, Virpil F-14 (VFX) Grip, Virpil Alpha Grip, Virpil CM3 Throttle + Control Panel 2, Winwing Orion (Skywalker) Pedals, Razer Tartarus V2 SpeedMaster Flight Seat, JetSeat Link to comment Share on other sites More sharing options...
Yurgon Posted May 28, 2017 Share Posted May 28, 2017 (edited) Thanks for the reply, anyway it is exactly how i input the coordinates into the cdu...then i tried both 37t and 38t but as i wrote before both seems wrong (140 and 359 nm far from steerpoint 2). Just to be sure, when you entered the new GZD (37T or 38T), did you also input the rest of the coordinate again? I believe when entering a new GZD, the rest of the coord will reset, and you'll be left with the south-eastern corner of said grid zone as your new coord. :smartass: Edit: Sorry, should be the south-western corner, not the south-eastern one. Edited May 31, 2017 by Yurgon Link to comment Share on other sites More sharing options...
Tripomastigote Posted February 14, 2018 Share Posted February 14, 2018 Hi Baltic!!!! Tried to play this mission and JTAC "Pointer" never respond to mi call. I orbited WP2 for about 10 minutes and nothing. I set (35MHz VHF FM T/R) Can you help me? Thxs Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 14, 2018 Share Posted February 14, 2018 Hey I will check - though IIRC he is not crucial for completing the mission. Link to comment Share on other sites More sharing options...
Tripomastigote Posted February 14, 2018 Share Posted February 14, 2018 Hey I will check - though IIRC he is not crucial for completing the mission. I destroy all targets without the help of the jtac but de APC (anvil) do not move Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 14, 2018 Share Posted February 14, 2018 (edited) IIRC you need to give them order using F10 menu, I will have a look later tonight and get back to you. EDIT OK, found a bug. During one of the updates I had to change the way Anvil was activated - and then it seems forgotten to add back the F10 radio menu to call him. I've fixed it internally, and in order to avoid the need to wait for a whole week for another update, I am temporarily making this one mission available for the time being. LINK REMOVED, mission updated in the campaign. Sorry about the problems. Edited March 18, 2018 by baltic_dragon Link to comment Share on other sites More sharing options...
Tripomastigote Posted February 15, 2018 Share Posted February 15, 2018 IIRC you need to give them order using F10 menu, I will have a look later tonight and get back to you. EDIT OK, found a bug. During one of the updates I had to change the way Anvil was activated - and then it seems forgotten to add back the F10 radio menu to call him. I've fixed it internally, and in order to avoid the need to wait for a whole week for another update, I am temporarily making this one mission available for the time being. LINK TO M12. Sorry about the problems. Thanks Baltic Now Anvil move!!!!! , but they go to the opposite side!!!! . They go toward a small town. Sorry for my English !!!! I’m learning Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 15, 2018 Share Posted February 15, 2018 Now that is weird and likely an AI bug. Will check again :D Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 15, 2018 Share Posted February 15, 2018 ..and fixed, AI problem. I confirm that JTAC will stop at remarks, it is an old bug when targetting MANPADs, hope it will be fixed soon! Link to comment Share on other sites More sharing options...
Tripomastigote Posted February 17, 2018 Share Posted February 17, 2018 ..and fixed, AI problem. I confirm that JTAC will stop at remarks, it is an old bug when targetting MANPADs, hope it will be fixed soon! Thanks in advance, I’ll be waiting anxiously this to be fixed, so I can continue the campaign. Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 17, 2018 Share Posted February 17, 2018 Thanks in advance, I’ll be waiting anxiously this to be fixed, so I can continue the campaign. Enviado desde mi iPhone utilizando Tapatalk Hey, I think if you download version from this link: https://forums.eagle.ru/showpost.php?p=3397266&postcount=32 you should be good to go! Link to comment Share on other sites More sharing options...
Tripomastigote Posted February 17, 2018 Share Posted February 17, 2018 Hey, I think if you download version from this link: https://forums.eagle.ru/showpost.php?p=3397266&postcount=32 you should be good to go! Hi Baltic !!!! I downloaded the version. Now Anvil is ok, the problem now is Uzi 11 he go to the target zone but he can’t land for evacuate the prisioners Thanks in advanced Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
Tripomastigote Posted February 19, 2018 Share Posted February 19, 2018 Hi Baltic !!!! I downloaded the version. Now Anvil is ok, the problem now is Uzi 11 he go to the target zone but he can’t land for evacuate the prisioners Thanks in advanced Enviado desde mi iPhone utilizando Tapatalk Hi Baltic, sorry Do you have any comment for the problem ? Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 19, 2018 Share Posted February 19, 2018 Hey, I will have to check again, but Uzi was landing fine on my end, I tested it three times... let me check ASAP and get back to you. Link to comment Share on other sites More sharing options...
Tripomastigote Posted February 20, 2018 Share Posted February 20, 2018 Hey, I will have to check again, but Uzi was landing fine on my end, I tested it three times... let me check ASAP and get back to you. THANKS Baltic!!! I apologize for the inconvenient I’ll wait. I played three time the mission and in all one Uzi can’t land. Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 22, 2018 Share Posted February 22, 2018 Hey! There is some larger problem with the helo refusing to land anywhere in the AO, no matter what I do, so I might need to change more things in the mission than I thought to make it workable... will keep you posted! Link to comment Share on other sites More sharing options...
baltic_dragon Posted February 23, 2018 Share Posted February 23, 2018 OK, mission updated, please check if it works as intended. Also submitted to ED. Link to comment Share on other sites More sharing options...
Tripomastigote Posted March 4, 2018 Share Posted March 4, 2018 OK, mission updated, please check if it works as intended. Also submitted to ED. Thanks Baltic for your help. I finally completed the mission . This campaign is awesome, good job Enviado desde mi iPhone utilizando Tapatalk Link to comment Share on other sites More sharing options...
zcart Posted April 15, 2018 Share Posted April 15, 2018 (edited) The campaign is updated automatically. Do we update campaigns manually? If manual then how to do it? I can not complete this mission because the problems described above are present. Sorry for my English. Edited April 15, 2018 by zcart Link to comment Share on other sites More sharing options...
zcart Posted April 15, 2018 Share Posted April 15, 2018 The way to the mission is to destroy all red targets has a map or buildings. We will not get permission to land but we land at the airport. Link to comment Share on other sites More sharing options...
baltic_dragon Posted April 16, 2018 Share Posted April 16, 2018 It does update but there hasn’t been an update from ED for quite some time- please try the version from this LINK. The fixed mission should come with the next update. Link to comment Share on other sites More sharing options...
Eviscerador Posted June 15, 2018 Share Posted June 15, 2018 Just for you to know, I completed this mission yesterday. Everything went fine. Awesome campaign, the only bad thing is that I already played more than half of it. I don't want it to end, really. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
baltic_dragon Posted June 15, 2018 Share Posted June 15, 2018 Thanks! Well you still have quite a few to go I think :) the total number is 21. And if all goes well I’ll have a surprise for 3 years of TEW in December :) Link to comment Share on other sites More sharing options...
Sanatog Posted August 11, 2018 Share Posted August 11, 2018 (edited) Anyone had any issues with the JTAC on this mission recently? I just played through it and I couldn't get JTAC to acknowledge the target kills AAA or bunkers. I had to keep signalling end of VUL and then check in again to get the next target. JTAC also disappeared from the comms options after the bunker kill - but that could be as expected. Otherwise the scripted elements seemed to play out just fine. Edited August 11, 2018 by Sanatog Formatting Link to comment Share on other sites More sharing options...
Recommended Posts