mutz Posted August 17, 2019 Share Posted August 17, 2019 Gents Having all 3 Elements form VAICOM, I am not able to activate the chatter and the airio. VAICOM itself seems to work. But the two extensions ( I have licenses for all 3 elements ) are not seen from Voice Attack (in Admin Mode). Both .dll files are in the extension folder of VAICOM. Any suggestion is appreicated. Cheers Mutz Link to comment Share on other sites More sharing options...
kaltokri Posted August 17, 2019 Share Posted August 17, 2019 Connect Air Supply does not work in F-14 since the last updates. I see this: 20:10:05 - Bodencrew: Kann nicht ausführen, Druckluftversorgung ist nicht angeschlossen If I use normal radio menu it is working. Please check it. Maybe ED has changed something internally for their carrier module. SYSTEM: Mainboard MSI MEG X570 | CPU Ryzen 7 5800X @ 4.5 GHz | RAM 64 GB @ 3200 MHz | GPU GIGABYTE RTX 4090 | 1 TB SSD | Win 10 x64 DEVICES: ASUS 27" LCD | TrackIR 5 | LukeClip | Quest 3 | PointCTRL | Virpil HOTAS | MFG Crosswind | TableMount MonsterTech MODULES: To much to list. But I stopped buying more, because of too much bugs in e.g. A-10C(II). @ED: Fix the bugs and I spend money on modules again. Promised. PROJECTS: OpenFlightSchool: DE / EN Link to comment Share on other sites More sharing options...
gunterlund21 Posted February 17, 2020 Share Posted February 17, 2020 Is this impacted by 2.5.6 I was in Art of the Kill D#@ it!!!! Link to comment Share on other sites More sharing options...
jeepster Posted May 22, 2020 Share Posted May 22, 2020 @hollywood can we exspect a modification for supercarrier atc ? Link to comment Share on other sites More sharing options...
Quax456 Posted May 22, 2020 Share Posted May 22, 2020 @hollywood can we exspect a modification for supercarrier atc ? Would be great to shout "Hornet Ball" or "Kiss off" :D My Rig: Windows 11 Pro, Intel i7-13700k@5.4GHz, 64GB DDR5 5200 RAM, Gigabyte Z790 AORUS Elite AX, 1TB Samsung EVO 970, RTX4080, Thrustmaster HOTAS WARTHOG + Saitek Pro Flight Pedals, LG 32" 4K 60FPS, ACER 30" 4K 60FPS GSync Display, HP Reverb G2 V2 Link to comment Share on other sites More sharing options...
jeepster Posted May 22, 2020 Share Posted May 22, 2020 he did it, ready to download thank you hollywood Link to comment Share on other sites More sharing options...
Quax456 Posted May 27, 2020 Share Posted May 27, 2020 The AIRIO needs some updates for the SC. TACAN Tune Lincoln, Washington etc.....and Link Host (and the SC names are not in the keywords) My Rig: Windows 11 Pro, Intel i7-13700k@5.4GHz, 64GB DDR5 5200 RAM, Gigabyte Z790 AORUS Elite AX, 1TB Samsung EVO 970, RTX4080, Thrustmaster HOTAS WARTHOG + Saitek Pro Flight Pedals, LG 32" 4K 60FPS, ACER 30" 4K 60FPS GSync Display, HP Reverb G2 V2 Link to comment Share on other sites More sharing options...
gaz2644 Posted May 29, 2020 Share Posted May 29, 2020 Iv installed this as per the instructions, iv done the voice training, i can get it to understand everything, however when i say RIO or Jester, it understands me but says unrecognized, any one have any ideas how to fix this ? [sIGPIC]http://www.uknavalops.co.uk./[/sIGPIC] Link to comment Share on other sites More sharing options...
Sandman1330 Posted May 29, 2020 Share Posted May 29, 2020 Iv installed this as per the instructions, iv done the voice training, i can get it to understand everything, however when i say RIO or Jester, it understands me but says unrecognized, any one have any ideas how to fix this ? You may need to do the finish steps in the manual to import the new AIRIO commands into VA. Ryzen 7 5800X3D / Asus Crosshair VI Hero X370 / Corsair H110i / Sapphire Nitro+ 6800XT / 32Gb G.Skill TridentZ 3200 / Samsung 980 Pro M.2 / Virpil Warbrd base + VFX and TM grips / Virpil CM3 Throttle / Saitek Pro Combat pedals / Reverb G2 Link to comment Share on other sites More sharing options...
gaz2644 Posted May 29, 2020 Share Posted May 29, 2020 You may need to do the finish steps in the manual to import the new AIRIO commands into VA. Sorted it thanks [sIGPIC]http://www.uknavalops.co.uk./[/sIGPIC] Link to comment Share on other sites More sharing options...
Cibit Posted June 1, 2020 Share Posted June 1, 2020 Just bought this software and voiceattack, its going to be a gamechanger for me thank you. My accent is a struggle for my PC but we are learning :thumbup: i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB Link to comment Share on other sites More sharing options...
splash Posted September 15, 2020 Share Posted September 15, 2020 Hi, is it possible to use VAICOM in other languages different than English directly out of the box? Thanks. Link to comment Share on other sites More sharing options...
stormrider Posted September 15, 2020 Share Posted September 15, 2020 Hi, is it possible to use VAICOM in other languages different than English directly out of the box? Thanks. It depends on the Speech Recognition engine that you have. In my system, I only have English UK and US. Having lived equal number of years in both countries, I can use both and sometimes none. You will probably have to record a bunch of keywords tho or if you're lucky, to find your language's pack already shared by someone else in the user files section. Banned by cunts. Link to comment Share on other sites More sharing options...
gunterlund21 Posted October 1, 2020 Share Posted October 1, 2020 are the carrier comms implemented I was in Art of the Kill D#@ it!!!! Link to comment Share on other sites More sharing options...
gunterlund21 Posted December 2, 2020 Share Posted December 2, 2020 HI all having a wierd issue with VAICOM. recently it started spitting out additional and repititious inputs. Anyone have any idea what this is. Also if you do an F18 free flight and change a radio freq away from 305 it starts flooding Vaicom with input request. I was in Art of the Kill D#@ it!!!! Link to comment Share on other sites More sharing options...
gunterlund21 Posted December 2, 2020 Share Posted December 2, 2020 here is a copy of the repeating event I was in Art of the Kill D#@ it!!!! Link to comment Share on other sites More sharing options...
Steel Jaw Posted December 3, 2020 Share Posted December 3, 2020 Where did all of the threads go for VAICOM...where did the dedicated forum here go? "You see, IronHand is my thing" My specs: W10 Pro, I5/11600K o/c to 4800 @1.32v, 64 GB 3200 XML RAM, ASUS RTX3060ti/8GB. Link to comment Share on other sites More sharing options...
Judy1301 Posted December 4, 2020 Share Posted December 4, 2020 (edited) Hello guys, I've been seduced by the possibilities of Vaicom Pro and I purchased the bundle. I installed it as per the instructions in the manual, configured it with VA that I also own but I seem to run into some problems. In the config windows, the PTT tab seems to be confused with Easy Communications On and Off. I've selected Off in DCS but the PTT tab randomly shows On or Off. My module seems to be correctly detected (F/A-18C) but once in the A/C some vocal commands are not recognized by the sim, even if they are correctly recognized by VA. I've checked the FAQ page and applied the proposed solution (delete export.lua, etc.) but to no avail. My DCS is installed on a SSD, in a custom folder (D:/ drive) and I've selected the correct path in the Config tab. Should I also check the Registry box? When I do, I get a warning saying that it could jeopardize my install. I also have a problem with the interactive kneeboard. I can display it but the pages sometimes don't react, especially the ATC page. I always get to the Crystal Palace and Awacs page, for instance, but the ATC page won't display. I'm a bit frustrated because I see the enormous potential of Viacom but I can't seem to make it work correctly. Edit: Well, I've been making some tests for hours now and it doesn't work. I've tried Easy Communications but the PTT page of the config module keeps displaying Easy Comms OFF. And it works as if EC was OFF in DCS (e.g. TX4 unavailable). The kneeboard is another problem. Impossible to display the ATC page once I've chosen another one. And finally, in EC ON, if I use the select command to set the radio to a particular airfield, I see the frequency changing, but when I call ATC, it reverts back to my departing airfield and I can't communicate with another AB or carrier. I don't know, my Viacom install is maybe broken or I'm doing something wrong, but have no clue. BTW, VA recognizes all my vocal commands (100%). Hope you can help Thanks a lot Judy Edited December 4, 2020 by Judy1301 Further tests 1 Link to comment Share on other sites More sharing options...
Drac Posted December 4, 2020 Share Posted December 4, 2020 I usually look at the VoiceAttack list to see what is recorded. For example, when I say "JTAC", it shows up as "J TAC". I therefore added "J TAC" and all is good. I did that for all the Kneeboard pages that were not recognized. 1 Link to comment Share on other sites More sharing options...
Judy1301 Posted December 4, 2020 Share Posted December 4, 2020 Ok, Drac. I'll try that. Thanks Judy Link to comment Share on other sites More sharing options...
gunterlund21 Posted December 4, 2020 Share Posted December 4, 2020 yes Im having some of these same issues. I see easy comms on in the vaicom control panel even though Im not using it. I was in Art of the Kill D#@ it!!!! Link to comment Share on other sites More sharing options...
sthompson Posted December 9, 2020 Share Posted December 9, 2020 On 12/2/2020 at 7:00 PM, Mower said: Where did all of the threads go for VAICOM...where did the dedicated forum here go? It was never here. This is the thread for the older, no longer supported version of VAICOM. For version 2 and above look here: https://forums.eagle.ru/forum/329-vaicom/ I'm Softball on Multiplayer. NZXT Player Three Prime, i9-13900K@3.00GHz, 64GB DDR5, Win 11 Home, Nvidia GeForce RTX 4090 24GB, TrackIR 5, VKB Gunfighter III with MCG Ultimate grip, VKB STECS Standard Throttle, CH Pro pedals Link to comment Share on other sites More sharing options...
strike277 Posted December 17, 2020 Share Posted December 17, 2020 (edited) On 12/2/2020 at 7:00 PM, Mower said: Where did all of the threads go for VAICOM...where did the dedicated forum here go? stthompson put up the link to it Mower. That's the thread you were referring to. https://forums.eagle.ru/forum/329-vaicom/ Edited December 17, 2020 by strike277 1 Your Search-Fu is far better than mine! Link to comment Share on other sites More sharing options...
Nightstorm Posted January 26, 2021 Share Posted January 26, 2021 Good morning, I noticed this weekend that Ground Crew commands for NVG and HMD/HMS in the Viper don't seem to be working correctly. The commands are implemented in the latest keywords and they are accepted by Viacom but they don't have the intended results. I get a reply from the ground crew of "Copy"...."Rearming complete". And then no change to the NVG/HMD as expected. Using the comms menu it works correctly. Everything else I'm aware of works correctly. Link to comment Share on other sites More sharing options...
sthompson Posted January 26, 2021 Share Posted January 26, 2021 1 hour ago, Nightstorm said: Good morning, I noticed this weekend that Ground Crew commands for NVG and HMD/HMS in the Viper don't seem to be working correctly. The commands are implemented in the latest keywords and they are accepted by Viacom but they don't have the intended results. I get a reply from the ground crew of "Copy"...."Rearming complete". And then no change to the NVG/HMD as expected. Using the comms menu it works correctly. Everything else I'm aware of works correctly. I don't fly the Viper so can't test whether I have the same experience. But you could have a corrupted VAICOM database. It happens occasionally for reasons I do not understand. The solution is to load a clean copy using the reset page. That will wipe out any aliases you have added, however. BTW, you may get a better response if you post in the VAICOM PRO forum here: https://forums.eagle.ru/forum/329-vaicom/ I'm Softball on Multiplayer. NZXT Player Three Prime, i9-13900K@3.00GHz, 64GB DDR5, Win 11 Home, Nvidia GeForce RTX 4090 24GB, TrackIR 5, VKB Gunfighter III with MCG Ultimate grip, VKB STECS Standard Throttle, CH Pro pedals Link to comment Share on other sites More sharing options...
Recommended Posts