-Painter- Posted March 23, 2017 Share Posted March 23, 2017 To add one request: I am on version 1.2.9.2 and have to set my Microphone Boost all the way down to -90%. I fly a lot on the Blueflag server and from experience I would say that more or less 90% of the new SimpleRadioStandalone-users have to tune their microphone boost down - significantly down, like 90%. Nearly all of them are more or less not understandable at all when they just jump in with the default Microphone boost setting. I would ask you to set the current "-90%" Microphone Boost setting as the default value and label it as "0". From that starting point users can apply a "+" Microphone Boost if they are too quite. That would be an amazing improvement for all users because it's hurting in the ears when a new guy jumps in with a radio check and blows your ear with a cracking noise like a starting jet engine next to it. Regards REAPER 31 | Painter [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
MikeMikeJuliet Posted March 23, 2017 Share Posted March 23, 2017 It's great to see this is again in the works. I hope the work continues to be a swift and of high quality as it has this far. DCS Finland | SF squadron Link to comment Share on other sites More sharing options...
shagrat Posted March 23, 2017 Share Posted March 23, 2017 To add one request: I am on version 1.2.9.2 and have to set my Microphone Boost all the way down to -90%. I fly a lot on the Blueflag server and from experience I would say that more or less 90% of the new SimpleRadioStandalone-users have to tune their microphone boost down - significantly down, like 90%. Nearly all of them are more or less not understandable at all when they just jump in with the default Microphone boost setting. I would ask you to set the current "-90%" Microphone Boost setting as the default value and label it as "0". From that starting point users can apply a "+" Microphone Boost if they are too quite. That would be an amazing improvement for all users because it's hurting in the ears when a new guy jumps in with a radio check and blows your ear with a cracking noise like a starting jet engine next to it. Yeah, that is a brilliant idea, indeed. Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment Share on other sites More sharing options...
T_A Posted March 23, 2017 Share Posted March 23, 2017 Another options is a first run wizard that will help you setup the audio. IAF.Tomer My Rig: Core i7 6700K + Corsair Hydro H100i GTX Gigabyte Z170X Gaming 7,G.Skill 32GB DDR4 3000Mhz Gigabyte GTX 980 OC Samsung 840EVO 250GB + 3xCrucial 275GB in RAID 0 (1500 MB/s) Asus MG279Q | TM Warthog + Saitek Combat Pedals + TrackIR 5 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Paganus Posted March 23, 2017 Share Posted March 23, 2017 Howdy all, I must be a bit thick. I'm having trouble figuring something out. I am trying to get the "in game radio display" branch from post 1187, working on my machine. https://forums.eagle.ru/showpost.php?p=2983324&postcount=1187 I see the new script in the package but I haven't figured out how to make this work yet. If somebody using it could point me in the right direction? Any help would be appreciated. @Ciribob - Will this new display be fully integrated in the standard install at some point? No rush, no worries, I know you have your hands full, just curious, as it solves some problems. Thanks Link to comment Share on other sites More sharing options...
BlackSharkAce Posted March 23, 2017 Share Posted March 23, 2017 The program keeps crashing for me with any install later than 1.2.8.1 The log shows the following error: 20:48:51 Ciribob.DCS.SimpleRadio.Standalone.Common.UpdaterChecker+<CheckForUpdate>d__2 Running TESTING Version!! : 1.2.9.4 20:48:52 Ciribob.DCS.SimpleRadio.Standalone.Client.Audio.AudioPreview Error starting audio Output - Quitting! Retrieving the COM class factory for component with CLSID {F447B69E-1884-4A7E-8055-346F74D6EDB3} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). Link to comment Share on other sites More sharing options...
Esac_mirmidon Posted March 23, 2017 Share Posted March 23, 2017 You have installed Simple radio In C:? " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4 Link to comment Share on other sites More sharing options...
BlackSharkAce Posted March 23, 2017 Share Posted March 23, 2017 DCS-SimpleRadio Standalone I test in on my download folder actually. It usually works, does it have an influence ? Link to comment Share on other sites More sharing options...
Esac_mirmidon Posted March 23, 2017 Share Posted March 23, 2017 Yes, i have friends that had crashes because that. Try C: 1 " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4 Link to comment Share on other sites More sharing options...
BlackSharkAce Posted March 23, 2017 Share Posted March 23, 2017 (edited) Yes, i have friends that had crashes because that. Try C: I just gave that a shot, still no luck.. here is the complete log. 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.UI.MainWindow Started DCS-SimpleRadio Client 1.2.9.4 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Starting Device Search. Expand Search: True 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 6f1d2b60-d5a0-11cf-bfc7-444553540000 Instance: 6f1d2b60-d5a0-11cf-bfc7-444553540000 Mouse Usage: Undefined Type: Mouse 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding 6f1d2b60-d5a0-11cf-bfc7-444553540000 Instance: 6f1d2b60-d5a0-11cf-bfc7-444553540000 Mouse 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 6f1d2b61-d5a0-11cf-bfc7-444553540000 Instance: 6f1d2b61-d5a0-11cf-bfc7-444553540000 Keyboard Usage: Undefined Type: Keyboard 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding 6f1d2b61-d5a0-11cf-bfc7-444553540000 Instance: 6f1d2b61-d5a0-11cf-bfc7-444553540000 Keyboard 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 13841038-0000-0000-0000-504944564944 Instance: 63fdca10-8723-11e5-8004-444553540000 SteelSeries Rival Usage: Consumer Type: Device 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding (Expanded Devices) 13841038-0000-0000-0000-504944564944 Instance: 63fdca10-8723-11e5-8004-444553540000 SteelSeries Rival 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Added (Expanded Device) 13841038-0000-0000-0000-504944564944 Instance: 63fdca10-8723-11e5-8004-444553540000 SteelSeries Rival 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 13841038-0000-0000-0000-504944564944 Instance: 63fdf120-8723-11e5-8005-444553540000 Rival Gaming Mouse Usage: -64 Type: Device 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding (Expanded Devices) 13841038-0000-0000-0000-504944564944 Instance: 63fdf120-8723-11e5-8005-444553540000 Rival Gaming Mouse 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Added (Expanded Device) 13841038-0000-0000-0000-504944564944 Instance: 63fdf120-8723-11e5-8005-444553540000 Rival Gaming Mouse 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 80362341-0000-0000-0000-504944564944 Instance: e608b640-8ac1-11e5-8001-444553540000 EDTracker EDTracker2 Usage: Generic Type: Joystick 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding 80362341-0000-0000-0000-504944564944 Instance: e608b640-8ac1-11e5-8001-444553540000 EDTracker EDTracker2 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 0267004c-0000-0000-0000-504944564944 Instance: 63fda300-8723-11e5-8002-444553540000 Apple Keyboard Usage: VendorDefinedBegin Type: Device 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding (Expanded Devices) 0267004c-0000-0000-0000-504944564944 Instance: 63fda300-8723-11e5-8002-444553540000 Apple Keyboard 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Added (Expanded Device) 0267004c-0000-0000-0000-504944564944 Instance: 63fda300-8723-11e5-8002-444553540000 Apple Keyboard 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 0267004c-0000-0000-0000-504944564944 Instance: 63fda300-8723-11e5-8003-444553540000 Apple Keyboard Usage: Consumer Type: Device 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding (Expanded Devices) 0267004c-0000-0000-0000-504944564944 Instance: 63fda300-8723-11e5-8003-444553540000 Apple Keyboard 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Added (Expanded Device) 0267004c-0000-0000-0000-504944564944 Instance: 63fda300-8723-11e5-8003-444553540000 Apple Keyboard 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 13841038-0000-0000-0000-504944564944 Instance: 63fe1830-8723-11e5-8006-444553540000 Rival Gaming Mouse Usage: Consumer Type: Device 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding (Expanded Devices) 13841038-0000-0000-0000-504944564944 Instance: 63fe1830-8723-11e5-8006-444553540000 Rival Gaming Mouse 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Added (Expanded Device) 13841038-0000-0000-0000-504944564944 Instance: 63fe1830-8723-11e5-8006-444553540000 Rival Gaming Mouse 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found ffff044f-0000-0000-0000-504944564944 Instance: 5fe63160-8ac5-11e5-8006-444553540000 Thrustmaster Combined Usage: Generic Type: FirstPerson 22:46:12 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding ffff044f-0000-0000-0000-504944564944 Instance: 5fe63160-8ac5-11e5-8006-444553540000 Thrustmaster Combined 22:46:13 Ciribob.DCS.SimpleRadio.Standalone.Common.UpdaterChecker+<CheckForUpdate>d__2 Running TESTING Version!! : 1.2.9.4 22:46:16 Ciribob.DCS.SimpleRadio.Standalone.Client.Audio.AudioPreview Error starting audio Output - Quitting! Retrieving the COM class factory for component with CLSID {F447B69E-1884-4A7E-8055-346F74D6EDB3} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). I believe it is linked to the API update because the old API was dropped on releases starting 1.2.9.1. See here: https://github.com/ciribob/DCS-SimpleRadioStandalone/releases Edited March 23, 2017 by BlackSharkAce Link to comment Share on other sites More sharing options...
Ciribob Posted March 24, 2017 Author Share Posted March 24, 2017 (edited) I just gave that a shot, still no luck.. here is the complete log. 22:46:13 Ciribob.DCS.SimpleRadio.Standalone.Common.UpdaterChecker+<CheckForUpdate>d__2 Running TESTING Version!! : 1.2.9.4 22:46:16 Ciribob.DCS.SimpleRadio.Standalone.Client.Audio.AudioPreview Error starting audio Output - Quitting! Retrieving the COM class factory for component with CLSID {F447B69E-1884-4A7E-8055-346F74D6EDB3} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). I believe it is linked to the API update because the old API was dropped on releases starting 1.2.9.1. See here: https://github.com/ciribob/DCS-SimpleRadioStandalone/releases Sorry not much time for proper reply Did you install this https://www.microsoft.com/en-gb/download/details.aspx?id=48231 ? You're missing codecs i think Or this is the complete list: https://support.microsoft.com/en-us/help/3145500/media-feature-pack-list-for-windows-n-editions Sent from my ONEPLUS A3003 using Tapatalk Edited March 24, 2017 by Ciribob 1 Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
cypher_142 Posted March 24, 2017 Share Posted March 24, 2017 Evening everyone, after hours of troubleshooting some mates and i have found that JTAC operations...mainly someone using the AWACS panel to communicate with other aircraft cannot hear any transmission from any aircraft..regardless of freq/distance if line of site is on server side. we have also done some testing with the normal overlay and the same applies.... Has the same been experienced ? if so how was it fixed.. cheers cypher I7 4770K@4.5 GHZ, Gigabyte Z87X-OC FORCE, 24GB Ram, Aorus GTX 1080 TI extreme edition, 500 GB SSD,120 GB SSD , 2TB HDD, Corsair H80i, Win 7 Ultimate 64bit, Logitech G940,TrackIR 5 + Pro Clip [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
BlackSharkAce Posted March 24, 2017 Share Posted March 24, 2017 Sorry not much time for proper reply Did you install this https://www.microsoft.com/en-gb/download/details.aspx?id=48231 ? You're missing codecs i think Or this is the complete list: https://support.microsoft.com/en-us/help/3145500/media-feature-pack-list-for-windows-n-editions Sent from my ONEPLUS A3003 using Tapatalk You are the man ! It finally works after installing this package: https://support.microsoft.com/en-us/help/3145500/media-feature-pack-list-for-windows-n-editions Thank you ! I'm off to BuddySpike now :joystick: Link to comment Share on other sites More sharing options...
Ciribob Posted March 25, 2017 Author Share Posted March 25, 2017 Evening everyone, after hours of troubleshooting some mates and i have found that JTAC operations...mainly someone using the AWACS panel to communicate with other aircraft cannot hear any transmission from any aircraft..regardless of freq/distance if line of site is on server side. we have also done some testing with the normal overlay and the same applies.... Has the same been experienced ? if so how was it fixed.. cheers cypher Im not going to be able to take a look till Wednesday at the earliest (sorry!) but could you give some more details of the test? What were the server side settings? Was the AWAC player in DCS and in an actual GCI / Commander slot OR just in spectators? Had the AWAC player ever jumped into an aircraft while running SRS? What version of SRS for Server & clients Really appreciate as much info as possible :) , sorry for the issue. You are the man ! It finally works after installing this package: https://support.microsoft.com/en-us/help/3145500/media-feature-pack-list-for-windows-n-editions Thank you ! I'm off to BuddySpike now :joystick: Glad that fixed it :thumbup: Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
cypher_142 Posted March 25, 2017 Share Posted March 25, 2017 (edited) No worries at all... Server side setting where as follows : coalition security-on Spectator audio-on Line of sight-on Distance limitation-on Irl radio tx behaviour- on All other setting off...... version 1.2.9.2 server side and client side During the test we tried the below with coalition off and distance limitation off....this did not fix the issue.....only turning line of sight off did... Awacs player was in command slot actually in jeep in ca....but we also tried from the f10 map... Yes Awacs player had been in an aircraft prior to test...we where also switching to see if it was a problem with either one of our installations...all during same session....however we did try reconnecting after changing server settings.....than repeated the above.. It was strange because we found that we could communicate if we where both in a ca slot....all radios worked fine....how ever aircraft could hear us but we couldn't hear them.....problem persisted We even tried on 2 mhz fm with the mi8.... Edited March 25, 2017 by cypher_142 I7 4770K@4.5 GHZ, Gigabyte Z87X-OC FORCE, 24GB Ram, Aorus GTX 1080 TI extreme edition, 500 GB SSD,120 GB SSD , 2TB HDD, Corsair H80i, Win 7 Ultimate 64bit, Logitech G940,TrackIR 5 + Pro Clip [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
myHelljumper Posted March 25, 2017 Share Posted March 25, 2017 Hi there Ciribob, nice to see some update on SRS:). I think is would be more logical if the viggen radios were reversed, because the FR24 is a VHF AM only as the FR22 is a VHF AM/FM and a UHF. If we look at the 2000, the first radio is the VHF/UHF and the second radio is the UHF. The important point is that the first radio should be a VHF AM and the second radio should be a UHF. I hope you understand me ;). Helljumper - M2000C Guru Helljumper's Youtube https://www.youtube.com/channel/UCK3rTjezLUxPbWHvJJ3W2fA Link to comment Share on other sites More sharing options...
rogonaut Posted March 26, 2017 Share Posted March 26, 2017 im having trouble with the uh-1, everything works fine besides talking? Link to comment Share on other sites More sharing options...
Paganus Posted March 26, 2017 Share Posted March 26, 2017 Use the Intercom Mode Rotary. It seems sometimes it must be moved at least once to get the juices flowing. Link to comment Share on other sites More sharing options...
SoW Reddog Posted March 26, 2017 Share Posted March 26, 2017 The radio exports a JSON file containing all currently connected clients and their name so the way I'd go about doing it is when someone tries to join a plane slot, you disallow them the slot until their name appears in the file. Might be worth PMing DEADBEEF as he did that as part of the Kaukaus Offensive campaign. Where does the JSON file get exported to? I'm guessing we could mod the SRS source to output a CSV as well? Link to comment Share on other sites More sharing options...
Ciribob Posted March 27, 2017 Author Share Posted March 27, 2017 No worries at all... Server side setting where as follows : coalition security-on Spectator audio-on Line of sight-on Distance limitation-on Irl radio tx behaviour- on All other setting off...... version 1.2.9.2 server side and client side During the test we tried the below with coalition off and distance limitation off....this did not fix the issue.....only turning line of sight off did... Awacs player was in command slot actually in jeep in ca....but we also tried from the f10 map... Yes Awacs player had been in an aircraft prior to test...we where also switching to see if it was a problem with either one of our installations...all during same session....however we did try reconnecting after changing server settings.....than repeated the above.. It was strange because we found that we could communicate if we where both in a ca slot....all radios worked fine....how ever aircraft could hear us but we couldn't hear them.....problem persisted We even tried on 2 mhz fm with the mi8.... Thanks for the info. I'll have a look and see if there is a bug with the line of sight code. Obviously there is no Line of Sight for a Spectator / GCI as you're not associated with anything and the code should just ignore the test. Hi there Ciribob, nice to see some update on SRS:). I think is would be more logical if the viggen radios were reversed, because the FR24 is a VHF AM only as the FR22 is a VHF AM/FM and a UHF. If we look at the 2000, the first radio is the VHF/UHF and the second radio is the UHF. The important point is that the first radio should be a VHF AM and the second radio should be a UHF. I hope you understand me ;). I'll have a look at swapping it around. Its a quick change :) im having trouble with the uh-1, everything works fine besides talking? Are you trying to use the incockpit PTT (the actual physical one) or the SRS Hotkey? Are you sure you've got the radio selector switch on a working radio (green dot on SRS overlay ? ) Where does the JSON file get exported to? I'm guessing we could mod the SRS source to output a CSV as well? Just gets exported to where ever the server is run and replaced every 30 seconds or so with a file of the same name. Feel free to submit a patch for CSV as well but for further processing, JSON is a handy format as its pretty much natively read by everything under the sun and will give you a complex object back you can work with straight away. Downside of CSV is you'll have to build your object back up again (only minor issue though ) :) Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
-Painter- Posted March 27, 2017 Share Posted March 27, 2017 bump ...just in case you havn't seen the post @Ciribob To add one request: I am on version 1.2.9.2 and have to set my Microphone Boost all the way down to -90%. I fly a lot on the Blueflag server and from experience I would say that more or less 90% of the new SimpleRadioStandalone-users have to tune their microphone boost down - significantly down, like 90%. Nearly all of them are more or less not understandable at all when they just jump in with the default Microphone boost setting. I would ask you to set the current "-90%" Microphone Boost setting as the default value and label it as "0". From that starting point users can apply a "+" Microphone Boost if they are too quite. That would be an amazing improvement for all users because it's hurting in the ears when a new guy jumps in with a radio check and blows your ear with a cracking noise like a starting jet engine next to it. Regards REAPER 31 | Painter [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
rogonaut Posted March 28, 2017 Share Posted March 28, 2017 Use the Intercom Mode Rotary. It seems sometimes it must be moved at least once to get the juices flowing. Are you trying to use the incockpit PTT (the actual physical one) or the SRS Hotkey? Are you sure you've got the radio selector switch on a working radio (green dot on SRS overlay ? ) I totally forgot the rotary knob in the cockpit - seems to overruel the SRS radio selector hotkey. Works like a charm - great work!!!!! Thx! Link to comment Share on other sites More sharing options...
Ce_Zeta Posted March 29, 2017 Share Posted March 29, 2017 (edited) With the newest update i have the following issue, when i press audio preview. Problem Initialising Audio Output! Try a differnt output device. I don't have a different audio device, i'm just using a 3.5mm plug into the motherboard. I'm on win10, .net is 4.6.2, sound card is the standard realtek stuff. Previously i haven't had this issue. 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.UI.MainWindow Started DCS-SimpleRadio Client 1.2.8.1 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 6f1d2b60-d5a0-11cf-bfc7-444553540000 Instance: 6f1d2b60-d5a0-11cf-bfc7-444553540000 Mouse Usage: Undefined 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 6f1d2b61-d5a0-11cf-bfc7-444553540000 Instance: 6f1d2b61-d5a0-11cf-bfc7-444553540000 Keyboard Usage: Undefined 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding 6f1d2b61-d5a0-11cf-bfc7-444553540000 Instance: 6f1d2b61-d5a0-11cf-bfc7-444553540000 Keyboard 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 0002e0ff-0000-0000-0000-504944564944 Instance: 5e9c5850-67a8-11e6-8001-444553540000 G3 Usage: -253 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 0002e0ff-0000-0000-0000-504944564944 Instance: 5e9f1770-67a8-11e6-8002-444553540000 G3 Usage: Consumer 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 075c06a3-0000-0000-0000-504944564944 Instance: 5e9fb3b0-67a8-11e6-8003-444553540000 Saitek X52 Flight Control System Usage: Generic 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Adding 075c06a3-0000-0000-0000-504944564944 Instance: 5e9fb3b0-67a8-11e6-8003-444553540000 Saitek X52 Flight Control System 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found c22d046d-0000-0000-0000-504944564944 Instance: 5ea07700-67a8-11e6-8004-444553540000 G510 Gaming Keyboard Usage: Consumer 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found 508106a3-0000-0000-0000-504944564944 Instance: 342976e0-67ab-11e6-8002-444553540000 Programmable Hotkeys Usage: Consumer 01:42:06 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Found c22d046d-0000-0000-0000-504944564944 Instance: 5ea16160-67a8-11e6-8005-444553540000 G510 Gaming Keyboard Usage: VendorDefinedBegin 01:42:07 Ciribob.DCS.SimpleRadio.Standalone.Common.UpdaterChecker+<CheckForUpdate>d__2 Running Latest Version: 1.2.8.1 01:42:07 Ciribob.DCS.SimpleRadio.Standalone.Client.Audio.AudioPreview Error starting audio Output - Quitting! Retrieving the COM class factory for component with CLSID {F447B69E-1884-4A7E-8055-346F74D6EDB3} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). First of all. Thank you very much Ciribob. The Simple Radio concept is outstanding. Sadly I couldn't use it with my pals. Same error here with latest release 1.2.9.2 00:37:51 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Added (Expanded Device) 0780045e-0000-0000-0000-504944564944 Instance: 6ecbf170-2caa-11e5-8001-444553540000 Comfort Curve Keyboard 3000 00:37:51 Ciribob.DCS.SimpleRadio.Standalone.Common.UpdaterChecker+<CheckForUpdate>d__2 Running Latest Version: 1.2.9.2 00:37:54 Ciribob.DCS.SimpleRadio.Standalone.Client.Audio.AudioPreview Error starting audio Output - Quitting! No se pudo recuperar el generador de clases COM para el componente con CLSID {F447B69E-1884-4A7E-8055-346F74D6EDB3} debido al siguiente error: 80040154 Clase no registrada (Excepción de HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). Net: Checked. Codecs: Checked. Same O.S. , Realtek and Headset with a 3.5 mm jack. Edited March 29, 2017 by Ce_Zeta mistypo [sIGPIC]http://i.imgur.com/YexElgV.jpg[/sIGPIC] Link to comment Share on other sites More sharing options...
Ciribob Posted March 30, 2017 Author Share Posted March 30, 2017 First of all. Thank you very much Ciribob. The Simple Radio concept is outstanding. Sadly I couldn't use it with my pals. Same error here with latest release 1.2.9.2 00:37:51 Ciribob.DCS.SimpleRadio.Standalone.Client.Input.InputDeviceManager Added (Expanded Device) 0780045e-0000-0000-0000-504944564944 Instance: 6ecbf170-2caa-11e5-8001-444553540000 Comfort Curve Keyboard 3000 00:37:51 Ciribob.DCS.SimpleRadio.Standalone.Common.UpdaterChecker+<CheckForUpdate>d__2 Running Latest Version: 1.2.9.2 00:37:54 Ciribob.DCS.SimpleRadio.Standalone.Client.Audio.AudioPreview Error starting audio Output - Quitting! No se pudo recuperar el generador de clases COM para el componente con CLSID {F447B69E-1884-4A7E-8055-346F74D6EDB3} debido al siguiente error: 80040154 Clase no registrada (Excepción de HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). Net: Checked. Codecs: Checked. Same O.S. , Realtek and Headset with a 3.5 mm jack. Sorry to hear you're having trouble! I've double checked, the only way this error can occur is if your system is missing the resampler that SRS uses internally to change audio to the right format. I'd double check by just reinstalling this: https://www.microsoft.com/en-us/download/details.aspx?id=53356 (this is the windows 10 one) and restarting your PC. Should fix it :) bump ...just in case you havn't seen the post @Ciribob I've not added this to the release i'm about to post but I will look into it :) Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
Ciribob Posted March 30, 2017 Author Share Posted March 30, 2017 (edited) New Release Version - 1.2.9.5 .NET Version - PLEASE INSTALL THIS or it may not work: https://www.microsoft.com/en-gb/download/details.aspx?id=53345 Windows 7/8/10 N Users - PLEASE INSTALL THIS OR IT WILL NOT WORK - Adds the media codecs you need which are removed in the N Version - https://www.microsoft.com/en-gb/download/details.aspx?id=48231 - You'll know when you get the audio initialisation error :) Thanks for all the help testing and feedback! :thumbup: This release has the best version of audio quality so far for simultaneous transmissions. If you do hear any garbled audio, try turning off the radio voice effect (bottom of settings) and post recordings here or PM me :) For best results, separate the two most used radios to the left and right ear configurable under settings :) Changelog Changes to Audio Mixing! Viggen Partially Implemented - Thanks to aemvee ! Spitfire Implemented - Thanks to Tarres! Fixed L-39 Intercom Volume in cockpit Re-ordered Viggen Radios Made the Radio Voice effect temporarily configurable (check the bottom of settings) Fixed Line of Sight for GCI / AWACS Note: Backup favourites file before updating or they will lost when SRS is updated As always, thanks for the support and let me know if there are any issues! This version of the client is compatible with the last server release so no need to rush to update the servers. It is also backwards compatible with the last client release as well but I recommend updating clients ASAP :thumbup: DOWNLOAD THE LATEST RELEASE: https://github.com/ciribob/DCS-SimpleRadioStandalone/releases/latest Edited March 31, 2017 by Ciribob Scripts: Complete Transport And Logistics Deployment - CTLD / CTLD Examples - Lots of example of how to use CTLD CSAR Script - Downed Pilot Rescue / Dedicated Server Script - Automatically launch DCS Multiplayer server at startup Range Scoring Script - Get scores and counts hits on targets for gunnery or bombs / SimpleSlotBlock - Multiplayer dynamic Slot Blocking Script Projects: DCS-SimpleRadio Standalone - DCS Radio Integration for All Aircraft - NO TeamSpeak Required! :) DCS-SimpleRadio Troubleshooting Post / DCS-SimpleRadio Free Support Channel on Discord Link to comment Share on other sites More sharing options...
Recommended Posts