Snakedoc Posted February 22, 2020 Share Posted February 22, 2020 Hi balticdragon, I completed all the campaign and I enjoyed it so much that I have restarted it and now I'm playing with the new A10C cockpit update :D However, just wanted to bring to your attention that I've been experiencing a "constant" crash to desktop while playing mission #2. Don't know if this is DCS related or Campaign related but I've been experiencing it since updating to 2.5.6 So far the last 2 crashes happened at the same "spot": when the convoy is about to enter waypoint DELTA, just as the convoy passes the checkpoint with the tank and few soldiers, before the road splits in two direction; Here's the link to the other 3d I've posted on DCS bug section where I've attached also the crash logs: random crash during gameplay Maybe you can spot an error causing this? Thank you ASUS ROG STRIX Z490 F-GAMING | i7-10700K | RTX3090 TUF OC | 32GB DDR4 3200Mhz | Windows 10 64bit | Acer Predator X34P | TrackIR 5 | TM Warthog | TM T.Flight Rudder Pedals A-10C | A-10C II | F/A-18C | F-16C | FC3 | PG | Syria | SC Home made F-16C simulator Forum Thread: DCS World forum - The Viper Project - Home Cockpits Instagram: The Viper Project YouTube The Viper Project - Youtube channel Link to comment Share on other sites More sharing options...
Snakedoc Posted March 1, 2020 Author Share Posted March 1, 2020 any update on this? Thanks ASUS ROG STRIX Z490 F-GAMING | i7-10700K | RTX3090 TUF OC | 32GB DDR4 3200Mhz | Windows 10 64bit | Acer Predator X34P | TrackIR 5 | TM Warthog | TM T.Flight Rudder Pedals A-10C | A-10C II | F/A-18C | F-16C | FC3 | PG | Syria | SC Home made F-16C simulator Forum Thread: DCS World forum - The Viper Project - Home Cockpits Instagram: The Viper Project YouTube The Viper Project - Youtube channel Link to comment Share on other sites More sharing options...
wowbagger Posted March 1, 2020 Share Posted March 1, 2020 I would suspect 2.5.6 issues. I played that mission last week without any problem - but I haven't updated to 2.5.6 yet, specifically because I don't want it to break the campaign missions. CPU:5600X | GPU:RTX2080 | RAM:32GB | Disk:860EVOm.2 Link to comment Share on other sites More sharing options...
baltic_dragon Posted March 1, 2020 Share Posted March 1, 2020 I also wasn’t able to reproduce but I reported it to ED - they have seen similar behaviour elsewhere. Guess we just have to wait.. Link to comment Share on other sites More sharing options...
Snakedoc Posted March 1, 2020 Author Share Posted March 1, 2020 I also wasn’t able to reproduce but I reported it to ED - they have seen similar behaviour elsewhere. Guess we just have to wait.. Thank you for the reply, hope they'll be able to fix it soon :) ASUS ROG STRIX Z490 F-GAMING | i7-10700K | RTX3090 TUF OC | 32GB DDR4 3200Mhz | Windows 10 64bit | Acer Predator X34P | TrackIR 5 | TM Warthog | TM T.Flight Rudder Pedals A-10C | A-10C II | F/A-18C | F-16C | FC3 | PG | Syria | SC Home made F-16C simulator Forum Thread: DCS World forum - The Viper Project - Home Cockpits Instagram: The Viper Project YouTube The Viper Project - Youtube channel Link to comment Share on other sites More sharing options...
Snakedoc Posted March 4, 2020 Author Share Posted March 4, 2020 So I was able to narrow down the issue... it's still happening with the latest OB 2.5.6.44266. I have attached the crash log and two pictures for better understanding. When the convoy reaches the city of Kobuleti, it has to go over two bridges. The convoy crosses the first southern bridge with no issues, but as it approaches the second norther bridge it stops and gets stuck before the first vehicle is able to go over it. Immediately after the crash happens. Maybe it's some AI script causing the issue as it approaches the second bridge?dcs.log-20200304-225252.zip ASUS ROG STRIX Z490 F-GAMING | i7-10700K | RTX3090 TUF OC | 32GB DDR4 3200Mhz | Windows 10 64bit | Acer Predator X34P | TrackIR 5 | TM Warthog | TM T.Flight Rudder Pedals A-10C | A-10C II | F/A-18C | F-16C | FC3 | PG | Syria | SC Home made F-16C simulator Forum Thread: DCS World forum - The Viper Project - Home Cockpits Instagram: The Viper Project YouTube The Viper Project - Youtube channel Link to comment Share on other sites More sharing options...
baltic_dragon Posted March 5, 2020 Share Posted March 5, 2020 Thanks, I'll try again to see if I can reproduce. There is no scripting before the bridge IIRC, maybe this is some issue with pathfinding. Link to comment Share on other sites More sharing options...
Snakedoc Posted March 5, 2020 Author Share Posted March 5, 2020 thank you! I'll wait for your response :) ASUS ROG STRIX Z490 F-GAMING | i7-10700K | RTX3090 TUF OC | 32GB DDR4 3200Mhz | Windows 10 64bit | Acer Predator X34P | TrackIR 5 | TM Warthog | TM T.Flight Rudder Pedals A-10C | A-10C II | F/A-18C | F-16C | FC3 | PG | Syria | SC Home made F-16C simulator Forum Thread: DCS World forum - The Viper Project - Home Cockpits Instagram: The Viper Project YouTube The Viper Project - Youtube channel Link to comment Share on other sites More sharing options...
Snakedoc Posted March 5, 2020 Author Share Posted March 5, 2020 further to the "pathfinding" subject... I noticed that the convoy often deviates from the road and wonders into the dirt or grass next to it, gets confused for few seconds, but then regains the path and goes back onto the road. I played this mission only few times but I don't recall seeing this behavior before? ASUS ROG STRIX Z490 F-GAMING | i7-10700K | RTX3090 TUF OC | 32GB DDR4 3200Mhz | Windows 10 64bit | Acer Predator X34P | TrackIR 5 | TM Warthog | TM T.Flight Rudder Pedals A-10C | A-10C II | F/A-18C | F-16C | FC3 | PG | Syria | SC Home made F-16C simulator Forum Thread: DCS World forum - The Viper Project - Home Cockpits Instagram: The Viper Project YouTube The Viper Project - Youtube channel Link to comment Share on other sites More sharing options...
baltic_dragon Posted March 6, 2020 Share Posted March 6, 2020 (edited) Hey, I tried this mission - and no CTD for me... found another bug with one of the tasks, but nothing gamebraking. But I do confirm, the pathfinding is horrible... I will try to fix the problem I've found, maybe it was somewhat related to the problem you are experiencing.. Edited March 6, 2020 by baltic_dragon Link to comment Share on other sites More sharing options...
Elidji Posted March 28, 2020 Share Posted March 28, 2020 I also got a crash at the same point yersteday ! I attached the log.dcs.log-20200327-193822.zip Link to comment Share on other sites More sharing options...
Oldfox Posted March 30, 2020 Share Posted March 30, 2020 (edited) Hello, First try for me for that campain and mission 2 crashes 1.1mile from WP2 where we are supposed to anchor and wait for the convoy to go. Thanks for the help, really frustrating to get stuck so soon in the campain :( Edited March 30, 2020 by Oldfox Link to comment Share on other sites More sharing options...
baltic_dragon Posted March 30, 2020 Share Posted March 30, 2020 Wait for the update on Wednesday, I re-saved entire campaign in 2.5.6 and it fixed some of the issues (I don't get any crashes). Let me know if that helps once the patch is out. Link to comment Share on other sites More sharing options...
Oldfox Posted March 30, 2020 Share Posted March 30, 2020 Will do thanks! Next time do a poor and not interesting campain instead please so it's less frustrating getting stuck :) Link to comment Share on other sites More sharing options...
Oldfox Posted April 1, 2020 Share Posted April 1, 2020 (edited) Updated DCS and same crash when going from WP 1 to WP 2 in mission 2. :cry: I attached crashlog edit: I could continue mission without crash by setting prowler frequency before reaching WP2. Looks like it was crashing when trying to contact prowler before I tune radio (even though I did not hit space bar before setting the frequency). Hope it helps!dcs.log-20200401-093432.zip Edited April 1, 2020 by Oldfox Link to comment Share on other sites More sharing options...
Oldfox Posted April 1, 2020 Share Posted April 1, 2020 Omg crashed again after I made the truck turning back using flares...... Just after prowler is back rolling.dcs.log-20200401-102955.zip Link to comment Share on other sites More sharing options...
baltic_dragon Posted April 1, 2020 Share Posted April 1, 2020 Thanks will report to ED. Sorry to hear about your trouble.. as I said, I am unable to reproduce this problem, it just doesn’t happen on my end, which means it must be something specific for your config. Do you have any mods installed? Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted April 1, 2020 ED Team Share Posted April 1, 2020 Thanks for the data the team are aware 2020-04-01 10:29:48.200 WARNING EFFECTS2: BowwaveEmitter: unknown parameter 2020-04-01 10:29:54.853 INFO EDCORE: try to write dump information 2020-04-01 10:29:54.855 INFO EDCORE: # -------------- 20200401-102955 -------------- 2020-04-01 10:29:54.857 INFO EDCORE: DCS/2.5.6.45915 (x86_64; Windows NT 10.0.18362) 2020-04-01 10:29:54.858 INFO EDCORE: E:\Software\DCS_World\bin\Effects.dll 2020-04-01 10:29:54.860 INFO EDCORE: # C0000005 ACCESS_VIOLATION at DBD39D3F 00:00000000 2020-04-01 10:29:54.862 INFO EDCORE: SymInit: Symbol-SearchPath: '.;E:\Software\DCS_World;E:\Software\DCS_World\bin;C:\WINDOWS;C:\WINDOWS\system32;SRV*C:\websymbols*http://msdl.microsoft.com/download/symbols;', symOptions: 530, UserName: 'davyd' 2020-04-01 10:29:54.864 INFO EDCORE: OS-Version: 10.0.18362 () 0x300-0x1 2020-04-01 10:29:55.318 INFO EDCORE: 0x0000000000049D3F (Effects): Effects::GraphicEffect_Impl::undock + 0x166EF 2020-04-01 10:29:55.319 INFO EDCORE: 0x0000000000106857 (Visualizer): RenderParserImpl::DrawTransparentAll + 0x87 2020-04-01 10:29:55.319 INFO EDCORE: 0x000000000010C04C (Visualizer): RenderParserImpl::isEmpty + 0x498C 2020-04-01 10:29:55.319 INFO EDCORE: 0x000000000014D9D5 (Visualizer): smSceneManager::regLua + 0x1985 2020-04-01 10:29:55.319 INFO EDCORE: 0x000000000013FC40 (Visualizer): smSceneManager::CreateSceneManager + 0x6250 2020-04-01 10:29:55.319 INFO EDCORE: 0x00000000006DBCC7 (DCS): woLA::loadNewInputLayout + 0x303BC7 2020-04-01 10:29:55.319 INFO EDCORE: 0x00000000006ECEC3 (DCS): dDispatcher::InitDatabase + 0xDFF3 2020-04-01 10:29:55.319 INFO EDCORE: 0x00000000006C3364 (DCS): woLA::loadNewInputLayout + 0x2EB264 2020-04-01 10:29:55.320 INFO EDCORE: 0x00000000006C3729 (DCS): woLA::loadNewInputLayout + 0x2EB629 2020-04-01 10:29:55.320 INFO EDCORE: 0x0000000001696BD3 (DCS): AmdPowerXpressRequestHighPerformance + 0xB19BCF 2020-04-01 10:29:55.320 INFO EDCORE: 0x00000000008A01FE (DCS): uiAsyncNet::onGameStop + 0x67CCE 2020-04-01 10:29:55.320 INFO EDCORE: 0x0000000000017BD4 (KERNEL32): BaseThreadInitThunk + 0x14 2020-04-01 10:29:55.320 INFO EDCORE: 0x000000000006CED1 (ntdll): RtlUserThreadStart + 0x21 2020-04-01 10:29:55.550 INFO EDCORE: Minidump created. 2020-04-01 10:29:55.551 ERROR SOUND: render time = 0.203762s exceeded allowed slice of 0.010000s 2020-04-01 10:29:55.554 INFO DCS: enumerating loaded modules Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2 Link to comment Share on other sites More sharing options...
Oldfox Posted April 1, 2020 Share Posted April 1, 2020 Thanks guys! No mods at all full vanilla software for me. Is it kind of random or should I wait for a fix instead of crashing again 45 min into the mission? :p Link to comment Share on other sites More sharing options...
Lockmaster Posted April 18, 2020 Share Posted April 18, 2020 Crash just before waypoint Charlie I started playing game under DCS 2.5.5 so I could finish "Stone Sheild Campaign" and started The Enemy Within 3.0 without updating. Mission 1 played as did mission 2 under old version, but quit mission 2 at end and didn't save. It ran fine, but when I let DCS do latest update. mission 2 crashed just before waypoint "Charlie". This happened twice. Link to comment Share on other sites More sharing options...
Recommended Posts