JG14_Smil Posted January 15, 2017 Share Posted January 15, 2017 Hello, It seems most of the times I stop, shut off, refuel and restart my L-39 (using auto stop and start), the rear canopy falls off when back in flight. Any others? Link to comment Share on other sites More sharing options...
JG14_Smil Posted January 16, 2017 Author Share Posted January 16, 2017 I forgot to add, this is a MP issue. I guess I am the only one to fly the 39 long enough to refuel it. :) Link to comment Share on other sites More sharing options...
Morpheus Posted January 17, 2017 Share Posted January 17, 2017 Will give a try ;) Link to comment Share on other sites More sharing options...
JG14_Smil Posted January 17, 2017 Author Share Posted January 17, 2017 Thanks Morpheus, I've seen other L-39s flying with a missing rear canopy, so I know this happens to others. At first I thought I was doing something to cause it, but I've been careful not to interrupt the auto start, stop, start routines and it still happens. Last times I have seen it was NTTR map. Unsure of 1.5 version. I apologize for not stating facts earlier. Link to comment Share on other sites More sharing options...
JG14_Smil Posted January 17, 2017 Author Share Posted January 17, 2017 Yes, I just reproduced this in the NTTR. Auto start, auto stop, auto start, letting each one complete the normal sequence. Take off and rear canopy pops off when I rotate. Will test 1.5 now. Link to comment Share on other sites More sharing options...
JG14_Smil Posted January 17, 2017 Author Share Posted January 17, 2017 (edited) Yes, this is a bug. All testing done on the Aerobatics Online servers. Same conditions, same results, 1.5 and 2.0. L-39C, no human rear seat passenger, auto start, auto stop, auto start. Takeoff roll and rear canopy falls off. Edited January 17, 2017 by JG14_Smil Link to comment Share on other sites More sharing options...
JG14_Smil Posted January 17, 2017 Author Share Posted January 17, 2017 (edited) From 'macro_sequences.lua: start sequence lines: push_start_command(1.0, {device = devices.MECHANICS, action = device_commands.Button_7, value = 0.0, message = _("Front Canopy - OPEN")}) push_start_command(0.2, {device = devices.MECHANICS, action = device_commands.Button_1, value = 1.0}) push_start_command(0.2, {device = devices.MECHANICS, action = device_commands.Button_8, value = 0.0, message = _("Second Canopy - CLOSE & LOCK")}) push_start_command(0.2, {device = devices.MECHANICS, action = device_commands.Button_2, value = -1.0}) push_start_command(1.0, {device = devices.MECHANICS, action = device_commands.Button_8, value = 1.0}) stop sequence lines: push_stop_command(1.0, {device = devices.MECHANICS, action = device_commands.Button_7, value = 0.0, message = _("Front Canopy - OPEN")}) push_stop_command(0.2, {device = devices.MECHANICS, action = device_commands.Button_1, value = 1.0}) --push_stop_command(0.2, {device = devices.MECHANICS, action = device_commands.Button_8, value = 0.0, message = _("Second Canopy - OPEN")}) --push_stop_command(0.2, {device = devices.MECHANICS, action = device_commands.Button_2, value = 1.0}) Edited January 17, 2017 by JG14_Smil Link to comment Share on other sites More sharing options...
JG14_Smil Posted January 17, 2017 Author Share Posted January 17, 2017 Going external view and zooming in was a good learning experience. When we enter the L-39, the rear canopy is closed and sealed. When we hit the auto start sequence, the rear canopy un-seals, then re-seals. You can see this happen when zoomed in close. We do auto stop and both canopies open up. We do auto start. Sequence now runs with the rear canopy open. Rear canopy closes, but does not seal (you can see this as lines around canopy look different than when sealed. There are no key bindings for the rear canopy, so there is no way to manually seal the rear canopy. repeatable every time. Link to comment Share on other sites More sharing options...
JG14_Smil Posted January 17, 2017 Author Share Posted January 17, 2017 (edited) Like I said earlier, I am probably the only one that runs into this problem. As a work-around to any others that might want to stop and re-start online, you can comment out lines 426 and 427 of the auto stop sequence in your... C:\Program Files\Eagle Dynamics\DCS World 2 OpenAlpha\Mods\aircraft\L-39C\Cockpit\macro_sequences.lua file. This will stop it from opening the rear canopy when you shut down. same for 1.5 but different folder. The rear canopy stays closed, then un-seals and re-seals on restarts. Fly forever without it falling off. Note: I edited earlier post to make the lines you will edit red. Edited January 17, 2017 by JG14_Smil Link to comment Share on other sites More sharing options...
JG14_Smil Posted April 21, 2017 Author Share Posted April 21, 2017 (edited) Latest version update 1.5.6.4546. "Rear canopy falls off" bug remains. Repeatable. (auto stop/auto start triggers this bug) 'Master Warning' and 'Canopy Unsealed' lights remain on and rear canopy will fall off during takeoff. ------- Placing the Macro_Sequences.lua from the 2.0 build in the 1.5 folders stops this bug dead and rear canopy seals correctly. **REPORTED** Edited April 21, 2017 by JG14_Smil Link to comment Share on other sites More sharing options...
Recommended Posts